Table of Contents
Advertisement
Figure 52. Removing the internal cooling fan
Next steps
1
Follow the procedure listed in
2
Install the internal cooling fan.
Related links
Removing the air shroud
Installing the internal cooling fan
Installing the internal cooling fan
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the air shroud.
4
If installed, remove the front bezel.
Steps
1
Hold the cooling fan by the sides with the cable end facing the bottom of the system.
2
Align the four tabs on the internal cooling fan with the four slots on the system wall.
3
Press and slide the internal cooling fan into the slots until the release tab locks into place.
4
Connect the internal cooling fan power cable to the connector on the system board.
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
Installation and Service Manual
103
Advertisement
Table of Contents
