To Connect The Modem - HP OmniBook XE3 Reference Manual
Notebook pc
Hide thumbs
Also See for OmniBook XE3:
- Evaluator manual (188 pages) ,
- Service manual (117 pages) ,
- Startup manual (74 pages)
Table of Contents
Advertisement
To connect the modem
1. Check that the telephone line is an analog line, sometimes called a data line. It should
have 2, 3, or 4 wires. (You must not use a PBX or digital line.)
2. Connect a telephone cord with an RJ-11 plug to the built-in modem (or connect to a
PC card or external modem). If the plug on the phone cord doesn't fit the modem
jack, you may need to buy an adapter.
Special notes about using a modem in certain countries
In France, if you want to access the MiniTel system, you need MiniTel emulator
software. If your computer was purchased in France, it includes the TimTel Light
software. If your computer does not include TimTel Light, you must purchase
emulator software separately.
The pulse dialing feature may be disabled in certain countries, possibly because Loop
Disconnect is not certified there. If pulse dialing is disabled, you should use tone
dialing connections only.
Many countries impose a blackout period after a modem repeatedly fails to connect to
a service provider. The number of failed attempts and the period of time you must
wait before trying again differ from country to country. Check with your telephone
company. For example, if you are dialing from Italy and you fail to connect to your
server or cancel the connection, you must wait one minute before dialing that same
number again. If you dial before then, you will get an error message that says "delay."
After the fourth failed connection, you will need to wait one hour before trying the
Making Connections
Using the Modem
Reference Guide
55
Advertisement
Table of Contents
