ABB A130-M67 Operation Manual page 45
Hide thumbs
Also See for A130-M67:
- Operation manual (152 pages) ,
- Operation manual (148 pages) ,
- Operation manual (152 pages)
Table of Contents
Advertisement
Operation Manual / 4 Product description / A130-M.. - A145-M..
2
Removing and Installing
Version with water cooling
Freezing of the cooling water in the bearing casing
If cooling water freezes in the bearing casing, this can lead to severe dam-
age.
CAUTION
For transport and storage of the turbocharger, drain the cooling water
from the bearing casing via one of the two bottom openings of the water
connections.
2.2.1
Fastening of the turbocharger
Depending on the type and version, the turbocharger can be fastened in different ways. The
appropriate procedure must be chosen to undo the connection.
Oil-cooled bearing casing (A)
Attach lifting gear to the suspension eye.
Loosen and remove nuts (E). If clamping nut (D) is present: Loosen in accordance with
chapter Loosening the clamping nut [➙ 14].
Positioning the turbocharger for storage [➙ 15].
Water-cooled bearing casing (B)
Loosen and remove water connections. Close the openings of the water connections with
screw plugs.
Attach lifting gear to the suspension eye.
Loosen and remove nuts (E). If clamping nut (D) is present: Loosen in accordance with
chapter Loosening the clamping nut [➙ 14].
Positioning the turbocharger for storage [➙ 15].
Hydraulic loosening (round special nut)
Attach lifting gear to the suspension eye.
Loosen the round special nut with a hydraulic tool according to the instructions of the en-
ginebuilder.
Positioning the turbocharger for storage [➙ 15].
© Copyright 2017 ABB. All rights reserved.
HZTL4031_EN
Page 13 / 121
Revision E
January 2017
Advertisement
Chapters
Table of Contents
