Table of Contents
Advertisement
Basic settings
en
QBasic settings
There are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.
Changing the basic settings
The appliance must be switched off.
Touch the
field for approx. 3 seconds.
°
1.
Instructions on how to proceed appear in the
display.
Press the
field to confirm the instructions.
s
2.
The first setting, "Language", appears in the display.
Turn the rotary selector to change the setting as
3.
required.
Touch the
field.
s
4.
The next setting is shown in the display and can be
changed using the rotary selector.
Touch the
field to go through all the settings and
s
5.
use the rotary selector to make changes as required.
When finished, press and hold the
6.
3 seconds to confirm the settings.
A note is shown in the display to confirm that the
settings have been saved.
Cancelling
If you do not want to save the changes, you can press
the on/off button to cancel. A note is shown in the
display to confirm that the settings have not been
saved.
List of basic settings
Depending on the features of your appliance, not all
basic settings are accessible.
Setting
Options
Language
Set the language
Clock
Set the current time
Audible signal
Short cooking time
Medium cooking time*
Long cooking time
Button tone
Switched on
Switched off*
(Button tone at on/off always on)
Display brightness
Scale with 5 levels
Level 3*
Clock
Switched on*
Switched off
Night-time dimming
Switched off**
Switched on (Display dimmed between
22:00 and 6:00)
Demo mode
Switched off*
Switched on
(only displayed during the first 3 minutes
after the appliance has been reset or is
used for the first time)
14
field for approx.
°
Factory settings
Reset
Do not reset*
* Factory setting (factory settings may vary depending on the appli-
ance model)
Changes to the language, button tone and
Note:
display brightness settings take effect immediately. All
other changes take effect after the settings have been
saved.
--------
Power cut
The changes you make to the settings are retained
even after a power cut.
Only the settings pertaining to the initial use of the
appliance need to be implemented once again
following a power cut.
Changing the time
If you want to change the time, for example from
summer to winter time, you have to change the basic
setting.
The appliance must be switched off.
Touch the
field for approx. 3 seconds.
°
1.
Notes on the process appear on the display.
Press the
field to confirm the notes.
s
2.
The first setting "language" appears in the display.
Touch the
field.
s
3.
The setting for the clock appears.
Turn the rotary selector to change the clock time.
4.
Press and hold the
°
5.
confirm the setting.
A note is shown on the display to confirm that the
settings have been saved.
field for approx. 3 seconds to
Advertisement
Table of Contents
