Table of Contents
Advertisement
Operation Manual / TPL65-A10 / -A30
8 Disassembly and assembly / 8.7 Installing cartridge group
8.7 Installing cartridge group
© Copyright 2020 . All rights reserved.
CAUTION
Oil orifices
There is an orifice for adjusting the oil pressure in each of the two oil
supply pipes of the bearing casing. When the cartridge group, the bear-
ing casing or the turbocharger-is being fitted to the engine, it must be
ensured that the orifices specified for the turbocharger are installed in
both oil supply pipes.
Check that the oil orifices have been correctly installed.
u
Remove the cover from the oil connection.
u
Fit flange (42044) with screws (42054) and new gasket (42045).
u
Attach one lifting gear each to the two fins of the bearing casing
u
provided for this purpose.
Remove supports (90450) and carefully insert cartridge group.
u
Uniformly tighten the screws (61059) together with the Verbus Ripp®
u
washers (61058).
HZTL2482_EN
Rev.E
March 2020
Advertisement
Table of Contents
