Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment,
make sure you know where the nearest fire extinguisher is.
WARNING! Always wear approved eye / face protection when operating the torch.
WARNING! DO NOT use the torch if you notice that it is damaged or if there could be a gas leak from it.
WARNING! Butane gas is extremely flammable, handle with care.
WARNING! Always point the torch away from the eyes and body when igniting and during operation.
WARNING! DO NOT put the torch down when it is lit, DO NOT leave it unattended.
WARNING! The flame is not easily visible in bright daylight.
WARNING! Ensure the flame is completely extinguished after use. DO NOT use water to cool the torch down.
WARNING! Only use in a well ventilated area.
DO NOT use the torch in an area where paint fumes, solvents or other flammable solids, liquids or gases pose a potential hazard. Keep
flammable material away from the torch when operating.
DO NOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT hold any workpiece by hand.
DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.
DO NOT operate the torch if it is damaged as this may cause failure and/or possible personal injury.
DO NOT touch the top of the torch during or immediately after use, as it will be very hot. Allow to cool.
DO NOT allow children to operate the torch.
After use, allow the torch to cool before storing it.
When not in use, store away from direct sunlight in a safe, dry, childproof location.
DO NOT store at over 40°C, such as in a car in hot weather.
2. INTRODUCTION
High quality, lightweight torch kit. Suitable for heating, soldering and shrinking. Powered by butane (lighter fuel) and features a piezoelectric ignition
switch. Supplied with an anti-ignition cap and features gas/flame control. Torch is fitted with a retractable stand.
3. CONTENTS
Soldering torch
Hot Air Nozzle
Deflector Nozzle
Soldering Head
AK2962
© Jack Sealey Limited
INSTRUCTIONS FOR:
PROFESSIONAL SOLDERING/HEATING KIT
AK2962
MODEL No:
3 x Soldering Tips
Hot Knife
Soldering Sponge
Solder
Original Language Version
AK2962 Issue: 1 - 11/08/14
Advertisement
Related Manuals for Sealey AK2962
Summary of Contents for Sealey AK2962
- Page 1 AK2962 MODEL No: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 4.2.7. Deploy the retractable rest to stand the torch after use to avoid damaging the surface on which it stands. 4.2.8. The case of the AK2962 can be used as a workstation as in fig.4. fig.3 Environmental Protection Recycle unwanted materials instead of disposing of them as waste.