Contents Safety instructions ... 2 Description of the cooker hood ... 3 Using the cooker hood ... 4 Maintenance and cleaning ... 5 What to do if ... 7 Service and Spare Parts ... 8 Customer Care ... 8 Guarantee Conditions ... 9 Technical data ...
Use of the cooker hood This appliance is for domestic use only in a normal household. Never leave any deep-frying, melting fat, paraffin or any other inflammable liquid unattended on the hob. In the event of fire: Immediately switch off the cooker hood and the cooker. Note! Cover the fire.
Using the cooker hood The control panel Best results are obtained by using a low speed for normal conditions and high speed when odours are more concentrated. The control panel has two switches; one for the lamp and one for the fan, enabling you to select one of three speeds.
Maintenance and cleaning Before doing any maintenance work on the hood, disconnect it from the main supply by disconnecting the plug from the wall socket or unscrewing the fuse. Cleaning the hood Clean the outside of the hood using a damp cloth and a mild detergent. Never use corrosive, abrasive or flammable cleaning products.
After approximately three years of use, the KF8 filter should be replaced with a new, as the odour reduction capacity will be reduced. To remove the filter (Fig. 4): Remove the grease filters. Press the red buttons (A), lower the front of the carbon filter. Remove the carbon filter.
What to do if If your appliance fails to work properly please carry out the following checks. Symptom The cooker hood will not start... The cooker hood is not working effectively... The cooker hood has switched off during operation... If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number.
Service and spare parts In the event of your apppliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning Your call will be automatically routed to the Service Centre covering your post code area.
3. Should guarantee repairs be necessary the purchaser must inform the nearest customer service office (manufacturer`s service or authorised agent). AEG reserves the right to stipulate the place of the repair (i.e.the customer`s home, place of installation or AEG workshop).
Installation Unpacking Check that the cooker hood is not damaged. Transportation damages should immediately be reported to the transport company. Damages, faults and missing parts should immediately be reported to the retailer. Dispose carefully of the packaging material so that it is out of the way of small children.
Mounting the cooker hood - Fig. 7 Position the template on the wall and mark the position, and drill the holes (2 x Ø 8 mm).Mount the two rawl plugs with the hooks (3) Hang the hood on the hooks and level it with the adjustment screws (4) Remove the grease filters (5) and mark for the two screws (6).
Electric hob Gas hob Charcoal and oil 700 mm Electric hob Gas hob Charcoal and oil 700 mm Exhaust tube Power outlet 500 mm 650 mm Wall bracket 500 mm 650 mm Fig. 8...