Page 2
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
Enjoying the Party Mode ... 12 Listening to the FM Radio ... 13 Enjoying stereo or bilingual programs ... 14 Viewing Teletext ... 15 Made in Malaysia. Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan. Menu Adjustment Introducing the WEGA GATE navigator ... 16 “Settings”...
Installation x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 3.8 mm screws Note • Use only the supplied screws. Use of other screws may damage the TV. Installation 20 mm clamps...
x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tips •...
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.
Page 7
d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, Then press 1) To label, press V or v to select the alphanumeric characters for the label.
Overview of Controls TV front and rear panels TV front panel MIC 1 MIC 2 L(MONO) Button/Terminal PROG +/– 2 +/– WEGA GATE menu operations V,v,B,b WEGA GATE MIC 1, MIC 2 t1, t3, t4 Overview of Controls TV rear panel WEGA GATE Function Turn off or turn on the TV.
Using the remote control and basic functions Button PROG +/– 2 +/– 0 – 9 PROG WEGA WEGA RETURN GATE GATE RETURN Description Turn off temporarily or turn on the TV. Display the TV program. Jump to last program number that has been watched for at least five seconds.
Page 10
continued Button WEGA GATE menu operations WEGA GATE V, v, B, b RETURN Timer operations (Wake up timer) (Sleep timer) Teletext operations (green label) (red, green, yellow, blue) PIP operations , V, v, B, b Stereo/bilingual operations Overview of Controls Description Confirm selected items.
Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option. PROG WEGA WEGA RETURN GATE GATE RETURN Selecting the sound mode Press to select the desired sound mode. 5-Band Graphic Equalizer display will appear.
x Enjoying the Party Mode You can sing duet along with any music program of TV broadcast or with any audio/video equipment or create visual presentations (e.g., photos or video stories) with narration and favorite background music by using the Party Mode feature.
Listening to the FM Radio You are able to listen to the FM radio stations using your TV. To access to FM Radio mode: Press WEGA GATE button and select “FM Radio” (see page 16). Press FM button on the front panel (see page 8). To exit from FM Radio mode: Press WEGA GATE button, select the desired items: “TV”...
Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. PROG WEGA RETURN GATE Note • If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural but the noise is reduced.
x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. PROG WEGA RETURN GATE (red, green,...
Menu Adjustment x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode, Party Mode and “Settings” menu. WEGA GATE External Inputs FM Radio Party Mode Settings Select Confirm...
x “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. Picture Picture Mode: Vivid...
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( selected, then press Press V or v to select the desired item (e.g., “Picture Mode”), then press Select “Picture Mode”...
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press Press V or v to select the desired item (e.g., “Sound Mode”), then press Select “Sound Mode”...
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, sort or edit the channels and preset FM radio stations. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( ), then press Press V or v to select the desired item (e.g., “Auto Program”), then press...
Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel.
x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, label the connected equipment, select the color system and reset your TV to factory settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Setup”...
Additional Information x Connecting optional components Connecting to the video input terminal ( t ) TV front panel L(MONO) TV rear panel Notes • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 21).
continued Connecting to the monitor output terminal ( T ) TV rear panel Connecting to the component video input terminal ( TV rear panel Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to either 525i/60Hz or 625i/50Hz interlace signals.
• Check the antenna cable and connection on the TV, VCR and at the wall noisy sound (see page 23). • Check the antenna setup. Contact a Sony dealer for advice. • Display the “Channel Setup” menu and select “Manual Program” to preset the channel again (see page 21).
Page 26
(switch) to your TV (see page 22). The 1 (standby) • Count the number of times the 1 (standby) indicator flashes. indicator on your Press ! (main power) to turn off your TV. Contact your nearest Sony TV flashes red service center. several times after every three seconds.
Specifications 220-240 V AC, 50/60 Hz Power requirements Indicated on the rear of the TV Power consumption (W) B/G, I, D/K, M Television system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Color system NICAM Stereo/Bilingual B/G, I, D/K; Stereo/Bilingual system A2 Stereo/Bilingual B/G English, Russian Teletext language Channel coverage...
Page 29
Содержание Установка Элементы управления Более сложные функции Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan. Настройка с помощью меню Дополнительная информация Задняя крышка...
Page 34
MIC 1 MIC 2 L(MONO) PROG +/– V,v,B,b WEGA GATE MIC 1, MIC 2 WEGA GATE PROG...