Table of Contents
Advertisement
Quick Links
Before connecting, operating or adjusting this product, please read the instructions completely.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
contact us via the web at: http://www.panasonic.com/contactinfo
Operating Instructions
High Definition Video Camera
HDC-SDX1P
Model No.
VQT2W55
Advertisement
Table of Contents
Related Manuals for Panasonic HDC-SDX1H
Summary of Contents for Panasonic HDC-SDX1H
-
Page 1: Operating Instructions
Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo Operating Instructions High Definition Video Camera HDC-SDX1P Model No. -
Page 2: Things You Should Know
Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. - Page 3 Model No.: HDC-SDX1P Responsible party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
- Page 4 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥...
- Page 5 ∫ Product Identification Marking Product High Definition Video Camera AC adaptor U.S.A. CONSUMERS: ATTENTION: A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. <For USA-California only> This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material –...
-
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. - Page 7 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a...
-
Page 8: Recording Motion Pictures
AVCHD when it is imported to a PC. ∫ Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. -
Page 9: Table Of Contents
Contents Accessories... 11 Quick Guide... 12 Preparation Before using [1] Parts identification and handling ... 15 Setup [1] Power supply... 18 Inserting/removing the battery ... 19 Charging the battery ... 20 Charging and recording time... 21 [2] Recording to a card ... 22 Cards that you can use with this unit ... - Page 10 Editing [1] Deleting scenes/ still pictures ... 83 Dividing a scene to partially delete (AVCHD) ... 84 Dividing a scene to partially delete (MP4) ... 85 Deleting personal information ... 86 Protecting scenes/still pictures... 87 [2] DPOF setting ... 88 With a TV [1] Watching Video/Pictures on your TV ...
-
Page 11: Accessories
Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Jun. 2010. These may be subject to change. Battery pack VW-VBK180 AC adaptor VSK0711 AC cable K2CA2CA00025 AV multi cable K1HY12YY0004... -
Page 12: Quick Guide
Quick Guide ∫ Inserting the battery Install the battery by inserting it in the direction shown in the figure. A Insert the battery until it clicks and locks. ∫ Charging the battery A DC input terminal 1 Connect the AC adaptor to the DC input terminal. -
Page 13: Language Selection
∫ To turn off the unit B The status indicator goes off. ∫ Selecting a mode Operate the mode switch to change the mode to Motion Picture Recording Mode (l 29) Still Picture Recording Mode (l 31) Playback Mode (l 35, 74) ∫... - Page 14 ∫ Motion picture/Still picture playback 1) Change the mode to 2) Touch the play mode select icon A. 3) Select the [VIDEO/PICTURE] you wish to play back. ≥ Touch [ENTER]. 4) Touch the scene or the still picture to be played back.
-
Page 15: Preparation
Preparation Before using 1 2 3 4 AV MULTI Parts identification and handling Power button [ Delete/Video light button /LIGHT] ( l 50, 83) Intelligent auto/Manual button [iA/MANUAL] (l 33, 70) Optical image stabilizer button O.I.S.] (l 47) Recording start/stop button (l 29) Battery holder (l 19) HDMI mini connector [HDMI] (l 89, 93) - Page 16 VQT2W55 20 LCD monitor (Touch screen) (l 26) ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen.
- Page 17 26 Photoshot button [ 27 Zoom lever [W/T] (In Motion Picture Recording Mode or Still Picture Recording Mode) (l 46) Thumbnail display switch [ Volume lever [sVOLr] (In Playback Mode) (l 37) 28 Mode switch (l 25) 29 Status indicator (l 24) 30 DC input terminal (l 20) ≥...
-
Page 18: Setup
Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products. -
Page 19: Inserting/Removing The Battery
Inserting/removing the battery ≥ Press the power button to turn off the unit. (l 24) Install the battery by inserting it in the direction shown in the figure. A Insert the battery until it clicks and locks. CAUTION Danger of explosion if battery is incorrectly replaced. -
Page 20: Charging The Battery
≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 131. ≥ We recommend using Panasonic batteries (l 11, 21, 141). ≥ If you use other batteries, we cannot guarantee the quality of this product. -
Page 21: Charging And Recording Time
≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use. ≥ When using the AC adaptor or batteries made by other companies, the remaining battery capacity will not be shown. -
Page 22: Recording To A Card
Preparation Setup This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, check the equipment is compatible with these memory cards. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording. -
Page 23: Inserting/Removing An Sd Card
Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 44) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. -
Page 24: Turning The Unit On/Off
Preparation Setup You can turn the unit on and off using the power button or by opening and closing the LCD monitor. Turning the unit on and off with the power button Press the power button to turn on the unit. A The status indicator lights on. -
Page 25: Selecting A Mode
Preparation Setup Change the mode to recording or playback. Operate the mode switch to change the mode to Motion Picture Recording Mode (l 29) Still Picture Recording Mode (l 31) Playback Mode (l 35, 74) Selecting a mode VQT2W55... -
Page 26: Adjusting Lcd Monitor
Preparation Setup How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. -
Page 27: Setting Date And Time
Preparation Setup When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to Select the menu. -
Page 28: Basic
Basic Recording/ Playback ∫ Basic camera positioning 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use the Sub-recording Start/Stop button A when holding the unit at waist level. ≥... -
Page 29: Recording Motion Pictures
Basic Recording/ Playback ≥ Open the lens cover before turning on the unit. (l 15) Change the mode to Open the LCD monitor. Press the recording start/ stop button to start recording. A When you begin recording, ; changes to ¥. Press the recording start/ stop button again to pause recording. - Page 30 ∫ Screen indications in the Motion Picture Recording Mode 0h00m00s 0h00m00s 0h00m00s R 1h20m R 1h20m R 1h20m About the compatibility of the recorded motion pictures ≥ Only motion pictures recorded with the recording format set to AVCHD are supported by AVCHD compatible equipment.
-
Page 31: Recording Still Pictures
Basic Recording/ Playback ≥ Open the lens cover before turning on the unit. (l 15) Change the mode to Open the LCD monitor. Press the button halfway. (For Auto focus only) Press the button fully. Focus indication: ≥ If you set the Optical image stabilizer function (l 47) to Stabilizer function will be more effective. -
Page 32: Recording Still Pictures In Motion Picture Recording Mode
∫ About the screen indications in Still Picture Recording MEGA R3000 R3000 R3000 Still picture operation indicator (l 118) ß: Flash (l 53) ßj: Flash level (l 53) Red-eye reduction (l 54) MEGA optical image stabilizer MEGA (l 31) Optical image stabilizer (l 47) Quality of still pictures (l 67) Size of still pictures (l 66) R3000:... -
Page 33: Intelligent Auto Mode
Basic Recording/ Playback The following modes appropriate for the condition are set just by pointing the unit to what you want to record. Mode Portrait When the object is a person Scenery Recording outdoors Spotlight Under a spotlight Low light Dark room or twilight It can record very clearly even in a dark Night portrait Recording night... -
Page 34: Auto Focus
∫ Intelligent Auto Mode When switching to Intelligent Auto Mode, the Auto White Balance and Auto Focus operate and automatically adjust the color balance and focusing. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. -
Page 35: Motion Picture/Still Picture Playback
Basic Recording/ Playback Change the mode to Touch the play mode select icon A. Select the [VIDEO/PICTURE] you wish to play back. ≥ Touch [ENTER]. Motion picture/Still picture playback VQT2W55... - Page 36 Touch the scene or the still picture to be played back. is displayed when [AVCHD] is touched or displayed when [MP4] is touched in step 3. ≥ Next (previous) page can be displayed by touching Select the playback operation by touching the operation icon. 0h00m00s 0h00m00s 0h00m00s...
- Page 37 ∫ Change the thumbnail display While the thumbnail is displayed, the thumbnail display changes in the following order if the zoom lever or adjust zoom buttons are operated to 20 scenes () 9 scenes () 1 scene () Highlight&Time frame index* (l 76) * Highlight&Time frame index can only set in Motion Picture Playback Mode.
- Page 38 Motion picture compatibility ≥ This unit is based on AVCHD format/MPEG-4 AVC file format. ≥ Video signals for the AVCHD that can be played back with this unit are 1920k1080/60i, 1920k1080/24p and 1440k1080/60i. ≥ Video signals for the MP4 that can be played back with this unit are 1280k720/30p, 960k540/30p and 640k480/30p.
-
Page 39: Setup
Basic Setup Press the MENU button. Touch the top menu A. Touch the submenu B. ≥ Next (previous) page can be displayed by touching Using the menu screen Touch the desired item to enter the setting. Touch [EXIT] or press the MENU button to exit the menu setting. -
Page 40: Using The Setup Menu
Basic Setup ≥ The items displayed differ depending on the position or settings of the mode switch. Select the menu. : [SETUP] # desired setting [DISPLAY] The screen display can be changed to [OFF] (a portion of information displayed) or [ON] (all information displayed). - Page 41 (Only when setting the region of your travel destination) Touch [DESTINATION]. ≥ Touch [ENTER]. ≥ When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region successively. If the home region has already been set once, execute the menu operation for Step 1.
- Page 42 [QUICK POWER ON] The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to ≥ Depending on the recording conditions, start time may be longer than 1 second. ≥ In the Quick power on mode, the zoom magnification becomes 1k. [QUICK START] This unit is put into recording pause approx.
- Page 43 [ALERT SOUND] Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound. (Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen. (l 120) [POWER LCD] This makes it easier to view the LCD monitor in bright places including outdoors.
-
Page 44: Format Card
[TV ASPECT] Please refer to page 91. [INITIAL SET] Set to [YES] for changing the menu settings back to the default condition. ≥ Settings for [CLOCK SET] and [LANGUAGE] will not be changed. [FORMAT CARD] Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. - Page 45 [DEMO MODE] This item is used to start the unit demonstration. (Only when the mode is at the If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted, the demonstration automatically starts. If any operation takes place, the demonstration is canceled.
-
Page 46: Advanced
Advanced Recording (Advanced) The default setting of the [ZOOM MODE] is [i.Zoom 23k]. It can be extended to a maximum of 23k during Motion Picture Recording Mode. (l 57) ¬ Change the mode to Extra Optical Zoom When in Still Picture Recording Mode, it is possible to take a picture with zoom up to a maximum of 40k without degrading the picture quality by setting the picture size to [ 0.3M] (l 66) ∫... -
Page 47: Image Stabilizer Function
Advanced Recording (Advanced) Use the image stabilizer to reduce the effects of shake during recording. ¬ Change the mode to ∫ Changing Image stabilizer mode (Motion Picture Recording Mode) : [RECORD SETUP] # [HYBRID O.I.S.] # [ON] or [OFF] When set to [ON], you can further improve image stabilization for recording while walking, or holding the unit and recording a distant subject with zoom. -
Page 48: Optical Image Stabilizer Lock
Optical Image Stabilizer Lock In Motion Picture Recording Mode, you can further improve optical image stabilization by touching and holding O.I.S. LOCK icon. With this function, you can further reduce the effects of the shake that tends to occur when using zoom. A O.I.S. -
Page 49: Af/Ae Tracking
Advanced Recording (Advanced) It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬ Change the mode to Touch ≥... -
Page 50: Recording With The Video Light
Advanced Recording (Advanced) The video light enables brightening of the images taken in a dimly-lit place. ¬ Change the mode to ≥ When set to , the video light turns on in Low Light Mode in Intelligent Auto Mode. ≥ When the video light is in use, the recordable time when using the battery is shortened. ≥... -
Page 51: Recording Functions Of Operation Icons
Advanced Recording (Advanced) Select the operation icons to add different effects to the images to be recorded. ¬ Change the mode to Touch to display the operation icons on the screen. ≥ Touch 1 at the bottom right of the screen to change the page and touch display/not-display the operation icon. -
Page 52: Intelligent Contrast Control
Fade When you start recording, the image/audio gradually appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The Fade setting is canceled when the recording stops. ∫ To select the color for Fade in/out : [RECORD SETUP] # [FADE COLOR] # [WHITE] or [BLACK] ≥... -
Page 53: Smile Shot
Smile Shot When a smiling face is detected during motion picture recording, the unit automatically records a still picture. The icon changes each time it is touched. (ON) # (Face Recognition) # OFF The unit records a still picture on detecting a smiling face. Still pictures are only recorded when the face of a person registered using Face Recognition (l 58) is detected. -
Page 54: Backlight Compensation
Red-Eye Reduction Reduces the phenomena where human eyes become red from flashes. ≥ The flash is activated 2 times. ≥ The red-eye phenomenon tends to appear in certain recording conditions and more with some people than with others. ≥ When faces are detected in the Intelligent Auto Mode, the Red-Eye Reduction is set to on. Self-timer This is for recording still pictures using the timer. - Page 55 Tele macro A more impressive image can be obtained by focusing on the object only in close-up and shading off the background. ≥ The unit can focus on the subject at a distance of approx. 50 cm (20q). ≥ If the magnification is 20k or less, then it is automatically set to 20k. ≥...
-
Page 56: Recording Functions Of Menus
Advanced Recording (Advanced) [SCENE MODE] When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ≥ Change the mode to : [RECORD SETUP] # [SCENE MODE] # desired setting [OFF]: 5Sports: Portrait: Spotlight: Snow: Beach: Sunset: Fireworks:... -
Page 57: Zoom Mode
[ZOOM MODE] Set the maximum zoom ratio for the Motion Picture Recording Mode. ≥ Change the mode to : [RECORD SETUP] # [ZOOM MODE] # desired setting [i.Zoom OFF]: [i.Zoom 23k]: [D.Zoom 50k]: [D.Zoom 1200k]: ≥ The larger the digital zoom magnification, the more the image quality is degraded. ≥... -
Page 58: Rec Mode
[REC MODE] Switch the picture quality of the motion pictures to be recorded. The recording mode that can be selected will differ depending on the recording format. (l 57) ≥ Change the mode to : [RECORD SETUP] # [REC MODE] # desired setting (When [AVCHD] is selected) [HA]/[HG]/[HX]/[HE] A Favors image quality... - Page 59 ∫ Registering a face for face recognition [RECORD SETUP] # [FACE RECOG.] # [SET] # [SET] ≥ Up to a maximum of 6 people can be registered. Align the person’s face with the guide. ≥ Take a picture of the persons face from the front, ensuring that their hair does not hide the outline of their face, their eyes or their eyebrows.
- Page 60 ∫ Changing the information of a registered person Select the menu. [RECORD SETUP] # [FACE RECOG.] # [SET] # [EDIT] Touch the desired item to enter the setting. ≥ Up to 3 face shots can be registered. To additionally register or to change/delete the registered face shots, touch the face shot.
- Page 61 [NAME DISPLAY] When a registered person is detected by face recognition during recording, the name registered for that person is displayed. ≥ Change the mode to : [RECORD SETUP] # [NAME DISPLAY] # desired number [OFF]/[1]/[2]/[3] ≥ Displayed name will disappear after a while. ≥...
- Page 62 [AGS] If the unit continues to be tilted upside down from the normal horizontal position while recording motion pictures, it is automatically put into recording pause. ≥ Change the mode to : [RECORD SETUP] # [AGS] # [ON] ≥ The AGS function may activate and cause the unit to pause the recording if you are recording a subject right above or right below you.
- Page 63 [SHOOTING GUIDE] Message is displayed when this unit is moved rapidly. ≥ Change the mode to : [RECORD SETUP] # [SHOOTING GUIDE] # [ON] When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording. ≥ Set to [OFF] to turn off the message indication. ≥...
-
Page 64: Mic Level
[MIC LEVEL] When recording, the input level from the built-in microphones can be adjusted. ≥ Change the mode to ≥ Switch to Manual Mode. (l 70) Select the menu. : [RECORD SETUP] # [MIC LEVEL] # desired setting [AUTO]: [SETr ]/[SET]: (When [SETr ]/[SET] is selected) - Page 65 [PICTURE ADJUST] Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ Change the mode to (This setting is retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode) ≥...
-
Page 66: Picture Size
[PICTURE SIZE] The higher the number of pixels, the higher the clarity of the picture when printing. ≥ Change the mode to : [PICTURE] # [PICTURE SIZE] # desired setting ∫ Picture size and Maximum zoom ratio Aspect ratio will change depending on the picture size. 4:3: Aspect ratio of 4:3 television 3:2:... - Page 67 [QUALITY] Selecting the picture quality. ≥ Change the mode to : [PICTURE] # [QUALITY] # desired setting Still pictures with a high picture quality are recorded. Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality.
- Page 68 [HI-SPEED BURST] Recording is done continuously at the rate of 30 or 60 still pictures per second. Use this function to record an object with fast movement. ≥ Change the mode to Select the menu. : [PICTURE] # [HI-SPEED BURST] # desired setting [OFF]: Cancel the setting.
- Page 69 [AF ASSIST LAMP] When the recording environment is dark and focusing is difficult, the video light turns on to make focusing easier. ≥ Change the mode to ≥ Switch to Manual Mode. (l 70) : [PICTURE] # [AF ASSIST LAMP] # [AUTO] ≥...
-
Page 70: Manual Recording
Advanced Recording (Advanced) ¬ Change the mode to (The manual focus, white balance, shutter speed, brightness (Iris and Gain) settings are retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode) Press the iA/MANUAL button to switch to Manual Mode. ≥... -
Page 71: White Balance
White balance Automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Press the iA/MANUAL button to switch to Manual Mode. (l 70) Touch [WB]. Touch to select White balance mode. -
Page 72: Manual Shutter Speed/Iris Adjustment
Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the iA/MANUAL button to switch to Manual Mode. (l 70) Touch [SHTR] or [IRIS]. Touch to adjust settings. -
Page 73: Manual Focus Adjustment
Manual focus adjustment If auto focusing is difficult due to the conditions, then use Manual Focus. ≥ Change the mode to ≥ Press the iA/MANUAL button to switch to Manual Mode. (l 70) (When MF assist function is used) Select the menu. : [RECORD SETUP] # [MF ASSIST] # [ON] ≥... -
Page 74: Playback (Advanced)
Advanced Playback (Advanced) Motion picture playback using operation icon For details on the basic playback operations, refer to page 35. Playback Playback display operation During Playback Fast forward/ rewind playback Slow-motion playback During Pause ≥ When the operation icon disappears, touch the screen to display the icon again. -
Page 75: Creating Still Picture From Motion Picture
Playback Playback display operation During Playback Direct playback Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. Picture size of the still picture to be created will differ depending on the recording mode of the recorded motion picture. -
Page 76: Highlight&Time Frame Index
Highlight&Time frame index An image of one scene is displayed as a thumbnail at set search condition. Scene can be played back from any midway point of the scene you wish to see. ≥ Operate the zoom lever or the adjust zoom buttons to thumbnail display to Highlight&Time frame index. -
Page 77: Resuming The Previous Playback
Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. : [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, scene. ≥ The memorized resume position is cleared if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change.) Zooming in on a still picture during playback (Playback zoom) -
Page 78: Various Playback Functions
Advanced Playback (Advanced) Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. Touch the date select icon. Touch the playback date. The scenes or the still pictures recorded on the date selected are displayed as thumbnails. -
Page 79: Face Highlight Playback/Highlight Playback/Intelligent Scene Selection
Face Highlight Playback/Highlight Playback/Intelligent Scene Selection A part can be extracted and played back even when the AVCHD scene is not set to normal playback. ≥ Change the mode to [AVCHD]. (l 35) ≥ Face Highlight Playback, Highlight Playback or Intelligent Scene Selection cannot be used for MP4 scenes. -
Page 80: Priority Setting
Touch [START]. ≥ When Face Highlight Playback/Highlight Playback is selected, the playback time is displayed and playback is paused. Select the playback operation. (l 35, 74) ≥ When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or [EXIT] is displayed.Touch the desired item. ≥... - Page 81 ∫ Playback time setting Touch the playback time. ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even play back if the part recognized as clearly recorded is short.
-
Page 82: Changing The Playback Setting And Playing Back The Slide Show
Changing the playback setting and playing back the slide show Touch Touch the desired item. [DATE SETUP]: [SLIDE INTERVAL]: [MUSIC SELECT]: (When [DATE SETUP] is selected) Touch the playback date. (When [SLIDE INTERVAL] is selected) Touch the interval of playback for the slide show. [SHORT]: [NORMAL]: [LONG]:... -
Page 83: Deleting Scenes
Advanced Editing Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to [SD CARD]/[AVCHD], [SD CARD]/[MP4] or [SD CARD]/[PICTURE]. (l 35) ∫ Deleting multiple scenes/still pictures from the thumbnail display Press the /LIGHT button while the thumbnail view screen is displayed. -
Page 84: Dividing A Scene To Partially Delete (Avchd)
To complete editing Press the MENU button. ≥ You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ You can also delete still pictures by pressing the MENU button, selecting [PICT. SETUP] # [DELETE] # [ALL SCENES] or [SELECT]. -
Page 85: Dividing A Scene To Partially Delete (Mp4)
To delete all the divided points [DIVIDE] # [CANCEL ALL] ≥ The scenes that were deleted after division cannot be recovered. ≥ You cannot divide a scene if you are playing back a disc with a DVD burner (optional) connected, or if the number of scenes of a given date would exceed 99 scenes. ≥... -
Page 86: Deleting Personal Information
Deleting personal information Delete personal information from the AVCHD scene for which faces were recognized. ≥ Change the mode to [SD CARD]/[AVCHD]. ( ≥ Personal information is not recorded in the MP4 scenes. Select the menu. : [VIDEO SETUP] # [DELETE PERSONAL INFO] Touch the desired scenes with personal information to be deleted. -
Page 87: Protecting Scenes/Still Pictures
Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥ Change the mode to Select the menu. : [VIDEO SETUP] or [PICT. SETUP] # [SCENE PROTECT] Touch the scene/still picture to be protected. -
Page 88: Dpof Setting
Advanced Editing You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Change the mode to [SD CARD]/[PICTURE]. (l 35) ∫ What is DPOF? DPOF (Digital Print Order Format) is a format which allows the user of a digital camera to define which captured images on the SD card are to be printed, together with information on the number of copies they wish to print. -
Page 89: With A Tv
≥ Use the supplied AV multi cable. Check the output settings when connecting the component terminal or the video terminal with the AV multi cable. (l 92) ≥ Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal. - Page 90 ≥ Check that the plugs are inserted as far as they go. ≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required.
- Page 91 TV. (Refer to the operating instructions of the TV for details.) Refer to the following support site for information about Panasonic TVs with an SD card slot for playing back your pictures. http://panasonic.net/ ≥ For details on how to play back, please read the operating instructions for the TV.
-
Page 92: Connecting With A Hdmi Mini Cable
Connecting with a HDMI mini cable Select the desired method of HDMI output. : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080i]/[480p] ≥ [AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080i] or [480p] which enables the images to be displayed on your TV. -
Page 93: Playback Using Viera Link (Hdavi Control )
≥ VIERA Link is a new name for EZ Sync ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. - Page 94 ≥ Available linked operations between this unit and a Panasonic TV is different depending on the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating instructions of the TV for the operations that support on the TV.
-
Page 95: Copy/Dubbing
≥ Please read the operating instructions of the DVD burner for how to use it. ≥ MP4 scenes cannot be copied to disc. Copy to PC to make a backup. (l 102) Preparing for copying/playing back We recommend using Panasonic DVD burner VW-BN2/VW-BN01. ∫ About discs that can be used for copying Disc type... - Page 96 Connect the AC adaptor (supplied with DVD burner) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. Connect this unit to the AC adaptor and change the mode to Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with DVD burner).
-
Page 97: Copying To Discs
Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ You cannot copy AVCHD scenes together with still pictures or high-definition images together with standard images to the same disc. ≥... - Page 98 Approximate time for copying to a disc To copy AVCHD scenes to the full capacity of a disc Disc type [High Definition] DVD-RAM 50 min to 1 h 20 min DVD-RW 35 min to 1 h 15 min DVD-R 15 min to 45 min * Even if the data capacity to be copied is small, the time it takes for copying may be about the same as the time shown in the table.
-
Page 99: Playing Back The Copied Disc
Playing back the copied disc ≥ Only discs that have been copied by connecting this unit to the DVD burner or created with HD Writer AE 2.6X can be played back. A Mini AB USB Connection Cable (supplied with DVD burner) Connect this unit to the DVD burner to prepare for playback. -
Page 100: Managing The Copied Disc
Managing the copied disc ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 96) ∫ Formatting discs This is for initializing DVD-RAM, DVD-RW and +RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. -
Page 101: Dubbing Images Onto Other Video Devices
Copy/Dubbing With this unit/other products Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. AV MULTI Connect this unit to a video device and then change the mode to Start playback on this unit. -
Page 102: With A Pc
With a PC Before using HD Writer AE 2.6X You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs (BD), DVD discs or SD cards using HD Writer AE 2.6X, the software installed in the supplied CD-ROM. Refer to the operating instructions of HD Writer AE 2.6X (PDF file) for details on how to use it. - Page 103 ≥ Motion pictures that have been recorded on another device cannot be written to the software supplied with this unit. To write motion picture data recorded with the Panasonic High Definition Video Camera sold previously, use the HD Writer supplied with the unit.
-
Page 104: End User License Agreement
Further, Panasonic does not warrant that the operation of the Software will be uninterrupted or error free. Panasonic or any of its distributors will not be liable for any damage suffered by Licensee arising from or in connection with Licensee’s use of... -
Page 105: Operating Environment
With a PC Before using ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible BD/DVD writer drive and media are necessary for writing to a BD/DVD.) ≥... - Page 106 Display High Color (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024k768 pixels or more (1280k1024 pixels or more recommended) Windows Vista/Windows 7: DirectX 9.0c compatible video card (DirectX 10 recommended) with DirectDraw overlay Windows XP: DirectX 9.0c compatible video card Compatible with DirectDraw overlay PCI Express Free hard disk...
- Page 107 ∫ Operating environment for the card reader function (mass storage) IBM PC/AT compatible PC Microsoft Windows XP (32 bit) Home Edition Service Pack 2/Service Pack 3 Microsoft Windows XP (32 bit) Professional Service Pack 2/Service Pack 3 Microsoft Windows Vista (32 bit) Home Basic Service Pack 1/Service Pack 2 Microsoft Windows Vista (32 bit) Home Premium Service Pack 1/Service Pack 2 Microsoft Windows Vista (32 bit) Business Service Pack 1/Service Pack 2 Microsoft Windows Vista (32 bit) Ultimate Service Pack 1/Service Pack 2...
-
Page 108: Setup
≥ The following screen is displayed automatically. Click [Run setup.exe] # [Continue]. ≥ If the following screen is not displayed automatically, select [Start] # [Computer] (or double-click on [Computer] on the desktop), and then double-click [PANASONIC]. Click [Next]. Read the [End User License Agreement], then place a check beside [I accept the terms of the license agreement] if you agree to them and click [Next]. -
Page 109: Control Panel
Select where the application is to be installed, then click [Next]. Select [Yes] or [No] to create shortcut. ≥ A message regarding the playback in the environment used may be displayed depending on the performance of the PC used. Click [OK] after confirming. When installation is complete, some notes will appear. -
Page 110: Connecting To A Pc
PCs and some SD card readers are not compatible with the SDHC Memory Card or SDXC Memory Card. ≥ When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html VQT2W55 Connecting to a PC... -
Page 111: To Disconnect Usb Cable Safely
Verify [MATSHITA HDC-SDX1/SD USB Device] is selected and click [OK]. ∫ Charging the battery by connecting it to different devices When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc recorder or Panasonic DVD recorder, the battery will charge. -
Page 112: About The Pc Display
About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ Removable disk (Example: We recommend using HD Writer AE 2.6X to copy or write back motion picture data. Using Windows Explorer or other programs on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable... -
Page 113: Using With A Pc
If you log on with a user name for a guest user account, the software cannot be used. (On the PC) Select [Start] # [All Programs] # [Panasonic] # [HD Writer AE 2.6X] # [HD Writer AE]. ≥ For details on how to use the software applications, read the PDF operating instructions of the software. -
Page 114: If Using Mac
With a PC Using with a PC ≥ HD Writer AE 2.6X is not available for Mac. ≥ iMovie’09 supported. For details about iMovie’09, please contact Apple Inc. ≥ There are some limitations in the functions when iMovie’09 is used. Refer to page 126 for details. -
Page 115: To Use As A Camera For Skype
With a PC Using with a PC It is possible to perform video conferencing using Skype when this unit is connected to a PC that is connected to the Internet. Skype is a software that allows you to perform video conferencing using an Internet connection. ≥... -
Page 116: How To Connect
Free hard disk 100 MB free disc space drive space Sound Speaker or headphones Interface USB port Other High-speed broadband internet connection requirements ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥... -
Page 117: Others
Others Indications ∫ Recording indications Motion Picture Recording Mode 0h00m00s R 1h20m 1920 PRE-REC 1/100 OPEN 0dB Still Picture Recording Mode MEGA R 3000 1/100 1/100 OPEN 0dB OPEN Remaining battery power (l 21) 1h30m Remaining battery time (l 21) R 1h20m Remaining time for motion picture recording (l 30) - Page 118 1/100 Shutter Speed (l 72) OPEN/F2.0 Iris Value (l 72) Gain Value (l 72) Scene Mode (l 56) Power LCD (l 43) Image Stabilizer (l 47)/Optical Image Stabilizer Lock (l 48) AF/AE Tracking (l 49) Video Light (l 50) Picture Adjustment (l 65) Hi-Speed Burst Shooting (l 68) Digital Cinema Color (l 62)
- Page 119 ∫ Playback indications 1/;/5/ /7/8/D/E/;1/ Display during playback (l 35, 74) Operation Icon is displayed/not displayed. (l 35) 0h00m00s Playback Time (l 35) No.10 Scene Number Repeat Playback (l 76) Resume Playback (l 77) 100-0001 Still picture folder/file name DPOF already set (to more than 1) (l 88) Protected motion pictures/ still pictures (l 87)
-
Page 120: Messages
≥ Use a battery that is compatible with this unit. (l 18) If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair. -
Page 121: About Recovery
About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLE SCENES WILL BE DELETED.) ≥ The above message is displayed when abnormal management information is detected when the scenes are displayed in thumbnail. -
Page 122: Troubleshooting
Others Troubleshooting Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. This unit is turned off automatically. A clicking sound is heard when the unit is shaken. Remaining battery indication is not displayed properly. - Page 123 Problem Item other than the touched one is selected. The remaining time indication or the elapsed time indication is not shown. The unit arbitrarily stops recording. Auto focus function does not work. “ENVIRONMENT TOO DARK, OR LENS COVER CLOSED.” is displayed.
- Page 124 Problem Although this unit is correctly connected to a TV, images cannot be seen. The images are squeezed horizontally. Scenes cannot be deleted. If the SD card is inserted in this unit, it is not recognized. If the SD card is inserted in another device, it is not recognized.
- Page 125 Problem White round spots like soap bubbles appear on the recorded picture. “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed. VIERA Link does not work. When connected by the USB cable, this unit is not detected by the PC.
- Page 126 Problem When the USB cable is disconnected, an error message will appear on the PC. The power of the DVD burner cannot be turned on. Cannot see the PDF operating instructions for HD Writer AE 2.6X. Cannot copy scenes on the SD card by connecting to other equipment with the USB cable.
- Page 127 ∫ If scenes do not change smoothly when played back on another device (AVCHD) The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit.
-
Page 128: Cautions For Use
Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). -
Page 129: About The Battery
Do not use the unit for surveillance purposes or other business uses. ≥ This unit was designed for consumer intermittent use. It was not intended for continuous use, or for any industrial or commercial application resulting in prolonged use. ≥ In certain situations, continuous use could cause the unit to overheat and cause a malfunction. -
Page 130: About The Ac Adaptor
Prepare spare batteries when going out for recording. ≥ Prepare batteries enough to last for 3 to 4 times the period you are planning to record for. Cold places such as a ski resort can shorten recording time. If you drop the battery accidentally, check to see if the terminals are damaged. - Page 131 About status indicator during charging When the status indicator is flashing at a particularly fast or slow rate, the following should be considered. Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds): ≥ When the battery is over discharged or the temperature of the battery is too high or low.
-
Page 132: Lcd Monitor
It should be noted before use that Panasonic does not accept any responsibility for direct or indirect problems which occur as the result of the change to or loss of the information... -
Page 133: About Condensation
About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. -
Page 134: About Copyright
Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ≥ VIERA Link™ is a trademark of Panasonic Corporation. ≥ EZ Sync™ is a trademark of Panasonic Corporation. ≥ HDAVI Control™ is a trademark of Panasonic Corporation. -
Page 135: Recording Modes/Approximate Recordable Time
Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording. Recording format Recording mode Picture size 4 GB 8 GB 16 GB SD card 32 GB 48 GB 64 GB... -
Page 136: Approximate Number Of Recordable Pictures
Others Approximate number of recordable pictures ≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures. Aspect ratio Picture size Picture quality 512 MB 1 GB 2 GB 4 GB SD card 8 GB 16 GB... -
Page 137: Specifications
Others Specifications High Definition Video Camera Information for your safety Power source: DC 5.0 V (When using AC adaptor)/DC 3.6 V (When using battery) Power consumption: Recording; 4.4 W/Charging; 7.7 W Signal system: AVCHD;1080/60i MP4; 720/30p, 540/30p, 480/30p Recording format: AVCHD;... - Page 138 White balance adjustment: Auto tracking white balance system Standard illumination: 1,400 lx Minimum required illumination: Approx. 4 lx (1/30 with Low light mode in the Scene mode) Approx. 1 lx with the Color Night Rec function AV multi connector video output level: AV video output level;...
-
Page 139: Motion Pictures
∫ Motion pictures Recording media: SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exFAT system compliant) Refer to page 22 for details on SD cards usable in this unit. Compression: MPEG-4 AVC/H.264 Recording mode and transfer rate: AVCHD;... -
Page 140: Still Pictures
∫ Still pictures Recording media: SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exFAT system compliant) Refer to page 22 for details on SD cards usable in this unit. Compression: JPEG (Design rule for Camera File system, based on Exif 2.2 standard), DPOF corresponding Picture size: Picture aspect [4:3];... -
Page 141: Optional Accessories
Others Optional accessories Accessory No. VW-BC10PP VW-VBK180 VW-VBK360 RP-CDHM15 RP-CDHM30 VW-LDC103PP VZ-LL10PP VW-SK12PP VW-ACK180PP Figure Battery charger Rechargeable Lithium Ion Battery Pack Rechargeable Lithium Ion Battery Pack HDMI mini cable Video DC Light Light bulb for video DC light Shoe adaptor Accessory kit Description VQT2W55... - Page 142 Accessory No. RP-SDP16GU1K RP-SDP12GU1K RP-SDP08GU1K RP-SDP04GU1K RP-SDP02GU1K RP-SDW64GU1K RP-SDW48GU1K RP-SDW32GU1K RP-SDW16GU1K RP-SDW08GU1K RP-SDW04GU1K RP-SDW02GU1K VW-BN2 VW-BN01 *1 Please refer to page 21, concerning the battery charging time and available recording time. *2 To use the VW-LDC103PP, the shoe adaptor/VW-SK12PP and the battery pack/ VW-VBG130, VW-VBG260 are required.
-
Page 143: Accessory Order Form (For Usa And Puerto Rico Customers)
TO OBTAIN ANY OF OUR ACCESSORIES YOU CAN DO ANY OF VISIT YOUR LOCAL PANASONIC DEALER CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY ACCESSORY ORDER OFFICE 20421 84th Avenue South Kent, WA. 98032 Price Each Quantity Your State &... -
Page 144: Limited Warranty (Only For U.s.a. And Puerto Rico)
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it... - Page 145 Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com Or, send your request by E-mail to: npcparts@us.panasonic.com...
-
Page 146: Index
Index ∫ A ....20, 130 AC adaptor ....69 AF assist lamp . - Page 147 ∫ L ..... . .45 Language ....16, 26, 132 LCD monitor LCD set .
-
Page 148: Spanish Quick Use Guide/Guía Española Para El Uso Rápido
Spanish Quick Use Guide/ Guía española para el uso rápido ∫ Insertar la batería Meta la batería insertándola en la dirección señalada en la figura. A Introduzca la batería hasta que dispare y se cierre. ∫ Carga de la batería A Terminal de entrada de CC 1 Conecte el adaptador de CA al terminal de entrada de CC. - Page 149 ∫ Encender/apagar la unidad Encender y apagar el dispositivo con el botón de alimentación Pulse el botón de alimentación para encender el dispositivo. A El indicador de estado se ilumina. ≥ Para apagar la unidad,mantenga pulsado el botón de alimentación hasta que el indicador de estado se apague.
- Page 150 ∫ Selección del idioma 1) Pulse el botón MENU, luego toque [CONFIGURAR] > [LANGUAGE]. 2) Toque [Español]. ∫ Grabación de películas 1) Cambie el modo a 2) Abra el monitor LCD. 3) Pulse el botón de inicio/parada de grabación para iniciar la grabación. A Cuando comienza a grabar, ;...
- Page 151 (Reproducción de películas) 1/;: Reproducción/Pausa Rebobinado (durante la reproducción) Avance rápido (durante la reproducción) ∫: Detener la reproducción y visualizar las miniaturas. Visualiza la barra de reproducción directa. (l 75) (Reproducción de fotografías) 1/;: Iniciar o hacer una pausa en la presentación de diapositivas (reproducción de las fotografías que contiene en orden...
- Page 152 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 VQT2W55 F0610LE0 ( 1000 © Panasonic Corporation 2010 Printed in Japan...