Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Canon IMAGE STABILIZER EF70-200MM F/4L IS USM
Summary of Contents for Canon IMAGE STABILIZER EF70-200MM F/4L IS USM
- Page 1 EF70-200mm f/4L IS USM Instruction...
- Page 2 Thank you for purchasing a Canon product. The Canon EF70-200mm f/4L IS USM lens is a lightweight, compact, high-performance telephoto zoom lens with an Image Stabilizer for EOS cameras. • "IS" stands for Image Stabilizer. • "USM" stands for Ultrasonic Motor.
-
Page 3: Safety Precautions
a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. •... -
Page 4: Table Of Contents
Nomenclature Hood mount (→ 6) Filter mounting thread (→ 12) Focusing ring (→ 5) Focus mode switch (→ 5) Image stabilizer switch (→ 7) Image stabilizer mode selector switch (→ 7) For detailed information, reference page numbers are provided in parentheses (→ **). Focusing distance range selection switch (→... -
Page 5: Rubber Ring
The lens mount has a rubber ring for enhanced water- and dust-resistance. The rubber ring may cause slight abrasions around the camera's lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is replaceable by a Canon Service Center at cost. ENG-4... -
Page 6: Focusing Ring
2. Setting the Focus Mode To shoot in autofocus (AF) mode, set the focus mode switch to AF. To use only manual focusing (MF), set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. -
Page 7: Hood Mount
4. Zooming To zoom, turn the zoom ring. Be sure to finish zooming before focusing. Zooming after focusing can affect the focus. 5. Hood The ET-74 hood can keep unwanted light out of the lens, and also protects the front of the lens from rain, snow, and dust. - Page 8 6. Image Stabilizer Settings You can use the image stabilizer in AF or MF mode. Set the STABILIZER switch • If you are not going to use the image stabilizer function, set the switch to Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions.
- Page 9 7. Tips on Using the Image Stabilizer The image stabilizer in this lens is effective for hand-held shots under the following conditions. ● MODE 1 • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photography is prohibited, such as art museums and theater stages.
- Page 10 Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate for a blurred shot caused by a subject that moved. • Set the STABILIZER switch to taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is set to the image stabilizer function may introduce errors.
-
Page 11: Distance Scale
8. Infinity Compensation Mark Infinity compensation mark Distance index To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale. - Page 12 10. Using the Tripod Mount Adjusting the Revolving Mount This lens can be used with the A II (W) tripod mount ring, sold separately. You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a particular camera model for switching between vertical and horizontal positions.
-
Page 13: Filter Mounting Thread
(Sold separately) You can attach filters to the filter mounting thread on the front of the lens. • If you need a polarizing filter, use the Canon Circular Polarizing Filter (67mm). • To adjust the polarizing filter, first remove the lens hood. - Page 14 13. Extenders (Sold separately) With Extender EF1.4X ll or EF2X ll attached, the lens specifications will change as follows: Item Focal length (mm) Aperture Diagonal Angle of view Vertical Horizontal Maximum magnification (×) • First attach the Extender to the lens, then attach the lens to the camera. Detach it from the camera in the reverse order.
-
Page 15: Specifications
• There is no size available among 250D/500D close-up lenses. • Aperture settings are specified on the camera. • All data listed is measured according to Canon standards. • Product specifications and appearance are subject to change without notice. 70 – 200 mm, f/4... - Page 16 CT1-7568-005 © CANON INC. 2006 2009.7...