Connection To The Drain; Adjusting The Feet; Electrical Connection - Beko DIN Series User Manual
Hide thumbs
Also See for DIN Series:
- User manual (43 pages) ,
- Instructions manual (48 pages) ,
- User manual (42 pages)
Table of Contents
Advertisement
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink's
drainage. See the installation manual
supplied with your machine for detailed
information.
Drain pipe must be connected to the
sewage system and it should not be
connected to any surface water.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product swings when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
Steam may escape if the door of the
dishwasher is not adjusted properly.
Hot steam may cause serious burns
and injuries and damage your furniture.
14/EN
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Our company
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with
the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be easily
accessible after installation.
• Plug in the product to a grounded
socket which is protected by a fuse of
16 Amperes.
• The specified voltage must be equal to
your mains voltage.
Do not make connections via extension
cables or multi-plugs.
Damaged power cables must be
replaced by the authorised service
agent.
Advertisement
Table of Contents
