Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele G 6510
Summary of Contents for Miele G 6510
- Page 1 Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is in‐ stalled and used for the first time. en-AU, NZ HG05 M.-Nr.
-
Page 3: Table Of Contents
Contents Guide to the appliance................... 6 Guide to the appliance..................... 6 Control panel......................7 Display ........................8 Warning and Safety instructions ................9 Caring for the environment ................. 18 Disposal of the packing material................18 Disposing of your old appliance ................18 Energy-saving dishwashing ................... - Page 4 Contents Operation ......................49 Detergent ....................... 49 Adding detergent ....................51 Switching on ......................52 Selecting a programme..................52 Starting the programme ..................53 Display ........................53 Energy management ....................54 At the end of the programme................. 54 Switching off ......................55 Unloading the dishwasher ..................
- Page 5 Contents Warranty......................... 84 Optional accessories ................... 85 Electrical connection ................... 87 Water connection....................88 The Miele Waterproof system ................88 Connection to the water supply................88 Drainage......................... 90 Technical data ...................... 91 Settings menu ...................... 92 Opening the Settings menu ................... 92 Language ......................
-
Page 6: Guide To The Appliance
Guide to the appliance Guide to the appliance a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual compartment detergent dis‐ penser e Air inlet for drying (depending on model) -
Page 7: Control Panel
Guide to the appliance Control panel a Programme selection f OK button b Display g button (FlexiTimer) with indicator light c Option buttons h Programme selector button d Start button with indicator light i On/Off button e Arrow buttons These operating instructions apply to several different dishwasher models with different heights. -
Page 8: Display
Guide to the appliance Display Settings menu General The display is used to select or set the following: – the programme – the FlexiTimer (Delay start) – the Settings menu The Settings menu is used to alter the dishwasher's electronics to suit differ‐ The display can show the following: ent requirements. -
Page 9: Warning And Safety Instructions
Keep the installation plan and the operating instructions in a safe place and pass them on to any future owner. Miele cannot be held liable for damage caused by non-compli‐ ance with this information. - Page 10 Warning and Safety instructions Correct application This appliance is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts and other typical living quarters. This does not include common/ shared facilities or commercial facilities within hotels, motels or bed &...
- Page 11 Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Older children may only use the appliance when its operation has been clearly explained to them and they are able to use it safely, rec‐ ognising the dangers of misuse.
- Page 12 Repairs and other work by unqualified persons could be danger‐ ous. Installation, maintenance work and repairs to electrical applian‐ ces must only be carried out by a Miele approved service technician. Before installation, check the dishwasher for visible signs of dam‐...
- Page 13 Warning and Safety instructions To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage and frequen‐ cy) matches the mains electricity supply before connecting the dish‐ washer to the mains. Consult a qualified electrician if in any doubt. ...
- Page 14 If the connection cable is damaged, it must be replaced with a special cable of the same type (available from Miele) by a Miele au‐ thorised service technician only in order to avoid a hazard.
- Page 15 Warning and Safety instructions In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the warranty.
- Page 16 Warning and Safety instructions Correct use Do not use solvents in the dishwasher. Danger of explosion! Do not inhale or ingest dishwasher detergent. Some dishwasher detergents are strongly alkaline and contain irritants or corrosive in‐ gredients. They can be extremely dangerous if swallowed, and can cause burning in the nose, mouth and throat, or inhibit breathing.
- Page 17 Accessories Use only genuine original Miele spare parts. If spare parts or ac‐ cessories from other manufacturers are used, the warranty will be in‐ validated, and Miele cannot accept liability. Disposal of your old dishwasher ...
-
Page 18: Caring For The Environment
Caring for the environment Disposal of the packing mate‐ Disposing of your old appli‐ rial ance The packaging is designed to protect Electrical and electronic appliances of‐ the appliance from damage during ten contain materials which, if handled transportation. The packaging materials or disposed of incorrectly, could be po‐... -
Page 19: Energy-Saving Dishwashing
– Follow the detergent manufacturer's recommendations on detergent dos‐ age. – When using powder or liquid deter‐ gent you can use less detergent if baskets are only half full. You can find further tips on energy- saving dishwashing in "Miele's guide to dishwashing". -
Page 20: Ecofeedback Consumption Indicator
Caring for the environment EcoFeedback consumption in‐ 2. Actual consumption dicator At the end of the programme you can call up the actual amount of energy and function is used for Consumption water used by the programme which calling up information about the energy has just been run. -
Page 21: Before Using For The First Time
Before using for the first time Opening the door Closing the door At the end of programmes with a drying Push the baskets right in. phase (see "Programme chart"), the Then lift the door upwards and push door will open automatically a little in until it clicks into position. -
Page 22: Basic Settings
Before using for the first time Basic settings Time of day The display will then change to the Switch the dishwasher on with the screen for setting the time. button. The time of day needs to be set before The welcome screen will appear when the "FlexiTimer"... - Page 23 Before using for the first time Water hardness The message will then ap‐ Set up finished pear in the display. The display will then change to the screen for setting the water hardness. After confirming this with OK, the prompts and ...
-
Page 24: Before Using The Appliance For The First Time, You Require
Before using for the first time Before using the appliance for If the water hardness in your area is the first time, you require: constantly lower than 0.9 mmol/l (5 °d), you do not need to add dish‐ – approx. 1 kg dishwasher salt, washer salt. -
Page 25: Filling The Salt Reservoir
Before using for the first time Filling the salt reservoir Do not fill the reservoir with water. When filling the salt reservoir only open the door halfway to ensure that all the salt gets into the reservoir. Add dishwasher salt only until the reservoir is full or until water runs out of the opening. -
Page 26: Add Salt Reminder
Before using for the first time Add salt reminder If you only ever use multi-function combination products in your dish‐ Fill the salt reservoir with dishwasher washer, you can switch off both refill salt for reactivation when Add salt reminders for salt and rinse aid if you appears in the display (If it appears wish (see "Settings menu - Switching... -
Page 27: Rinse Aid
Before using for the first time Rinse aid If you only ever use combination products containing rinse aid in your Rinse aid is necessary to ensure water dishwasher, you do not need to add does not cling and leave marks on rinse aid. -
Page 28: Add Rinse Aid Reminder
Before using for the first time Add rinse aid reminder When the message ap‐ Add rinse aid pears in the display, the reservoir con‐ tains sufficient rinse aid for 2 - 3 pro‐ grammes only. Add rinse aid in plenty of time. ... -
Page 29: Loading The Dishwasher
Loading the dishwasher Notes – The spray arms must not be blocked by items which are too tall or hang Remove coarse food residues from through the baskets. If in doubt, test crockery. for free movement by manually rotat‐ ing the spray arms. There is no need to rinse items under running water. - Page 30 – Use detergents with glass protective ted at the end of a programme, where additives (e.g. Miele CareCollection water has not run off smoothly. It may tabs). need to be rubbed dry with a soft cloth.
-
Page 31: Upper Basket
Loading the dishwasher Upper basket Cup rack To make room for tall items, raise the See "Loading the dishwasher / Load‐ rack upwards. ing examples" for examples of how to Glasses can be arranged along the po‐ load crockery and cutlery. sitioning rail of the cup rack to give them some support during the pro‐... - Page 32 Loading the dishwasher Jumbo cup rack (depending on model) You can also move one of the side in‐ serts of the cutlery tray to make more The cup rack can be set at two different room for tall glasses. widths so that it can also accommodate large cups.
-
Page 33: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket Depending on the setting of the upper basket, the following plate dimensions In order to gain more space for taller can be accommodated. pieces of crockery in the bottom or up‐ per basket, the upper basket can be Dishwashers with cutlery basket adjusted on three levels with 2 cm be‐... -
Page 34: Lower Basket
Loading the dishwasher Lower basket Removable MultiComfort insert The rear section of the lower basket is See "Loading the dishwasher - Load‐ used for washing cups, glasses, plates, ing examples" for examples of how to pots and pans. load crockery and cutlery. You can remove the MultiComfort insert ... - Page 35 Loading the dishwasher Glass rack Glass rail The glass rack can be raised to make This rail is designed to hold glasses more room for tall items. with long stems securely. Stem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it.
- Page 36 Loading the dishwasher Hinged spikes Bottle holder The spikes at the front are used for The bottle holder can be used to wash washing plates, soup bowls, platters, narrow items, e.g. milk and baby bot‐ dessert bowls and saucers. tles. Both rows of spikes can be lowered to make more room for large items, e.g.
-
Page 37: Cutlery
Loading the dishwasher Cutlery 3D cutlery tray (depending on model) See "Loading the dishwasher / Load‐ ing examples" for examples of how to load crockery and cutlery. Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. -
Page 38: Cutlery Basket (Depending On Model)
Loading the dishwasher Cutlery basket (depending on model) Fit it onto the cutlery basket if re‐ quired. The cutlery basket can be placed any‐ where on the front rows of spikes in the lower basket. To avoid the risk of injury, knives and forks should be placed with the han‐... -
Page 39: Loading Examples
Loading the dishwasher Loading examples Dishwashers with cutlery tray Upper basket Lower basket... - Page 40 Loading the dishwasher Cutlery tray Heavily soiled items...
-
Page 41: Dishwashers With Cutlery Basket
Loading the dishwasher Dishwashers with cutlery basket Upper basket Lower basket... - Page 42 Loading the dishwasher Cutlery basket Heavily soiled items...
-
Page 43: Comparison Tests
Comparison tests Standard height with cutlery tray Test standard: AS/NZS 2007.1:2005, AS/NZS 2007.2:2005; AS/NZS 6400:2005 Standard programme for en‐ ergy label comparison tests: Capacity: 14 place settings Detergent quantity: 32.5 g in compartment II Rinse aid dispensing: Setting 3 You can find information on adjusting the rinse aid dosage in the "Rinse aid"... - Page 44 Comparison tests Capacity 14 ...
- Page 45 Comparison tests ...
-
Page 46: Xxl Height With Cutlery Tray
Comparison tests XXL height with cutlery tray Test standard: AS/NZS 2007.1:2005, AS/NZS 2007.2:2005; AS/NZS 6400:2005 Standard programme for en‐ ergy label comparison tests: Capacity: 15 place settings Detergent quantity: 33.7 g in compartment II Rinse aid dispensing: Setting 3 You can find information on adjusting the rinse aid dosage in the "Rinse aid"... - Page 47 Comparison tests Capacity 15 ...
- Page 48 Comparison tests ...
-
Page 49: Operation
For optimum cleaning and drying re‐ remove coloured stains (e.g. tea, cof‐ sults, use Miele dishwasher detergent fee, tomato sauce). and add Miele salt and Miele rinse aid separately. See "Optional accesso‐ Most dishwasher detergents are mildly ries". alkaline and contain enzymes and oxy‐... - Page 50 Operation Detergent dosage Some dishwasher detergents are Follow the dosage recommended by strongly alkaline and contain irritant the manufacturer on the packaging. or corrosive ingredients which can cause burning in the nose, mouth Unless directed otherwise, use one and throat if swallowed, or inhibit detergent tab or add 20 to 30 ml de‐...
-
Page 51: Adding Detergent
Operation Adding detergent Add the required amount of detergent and close the flap. Press the opening catch on the de‐ tergent dispenser. The flap will spring Make sure that the detergent packag‐ open. ing is properly closed after use to avoid it getting damp and becoming The flap is always open at the end of a lumpy. -
Page 52: Switching On
Operation Switching on Selecting a programme Make sure the spray arms are not ob‐ Choose your programme according to structed. the type of load and how dirty it is. Close the door. The different programmes and their uses are described in the Programme ... -
Page 53: Starting The Programme
Operation Starting the programme Display Press the Start or OK button. The estimated duration of the pro‐ gramme selected appears in hours and The programme will begin. minutes in the display before the pro‐ The Start indicator light will come on. gramme begins. -
Page 54: Energy Management
Operation Energy management At the end of the programme To save energy, the dishwasher will The programme has finished when switch off automatically a few minutes appears in the display and the Finished after the last time a button has been door has opened slightly (if applicable). -
Page 55: Switching Off
Operation Switching off Unloading the dishwasher At the end of a programme: Dishes tend to break and chip more easily when they are hot. Allow the The dishwasher can be switched off dishes to cool until they are comforta‐ at any time using the ... -
Page 56: Interrupting A Programme
Operation Interrupting a programme Changing a programme A programme is interrupted as soon as If the detergent dispenser flap has the door is opened. already opened, do not change the If the door is closed again, the pro‐ programme. gramme will continue from the point it was at before the door was opened. -
Page 57: Programme Options
Programme options Options Short The Short option reduces the duration You can select and deselect the options of programmes in which this option is using the appropriate buttons and the available by up to 30%. display. In order to achieve optimum cleaning ... -
Page 58: Detergentagent
Programme options DetergentAgent For optimum cleaning results, the dish‐ washer automatically adjusts the pro‐ gramme sequence to the type of deter‐ gent being used. Depending on the programme, this can mean that the run‐ ning time and energy consumption vary slightly. -
Page 59: Flexitimer With Ecostart
Programme options FlexiTimer with EcoStart Switch the dishwasher on with the button. The FlexiTimer gives you three ways The Start indicator light will flash. of starting the programme by means of delaying the start. You can set the start ... - Page 60 Programme options Start at Finish at With the function, you set the With the function, you set the Start at Finish at exact time at which you want the pro‐ time at which you wish the programme gramme to start. to end.
- Page 61 Programme options EcoStart Changing or deleting set times function allows you to take You can change the set times or the EcoStart advantage of time variable economy programme before the start time in the rates of electricity. Before you can use display is reached.
-
Page 62: Programme Chart
Programme chart Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C Sensor wash Variable programme sequence, sensor-controlled adjustment according to amount of crockery and soiling 47-65 required required Light soiling 55°C Intensive 75°C Sensor wash gentle Quick wash 40°C Hygiene... - Page 63 Programme chart Consumption Duration Electricity Water Cold water Hot water Litres Cold water Hot water h:min h:min 2:41 2:34 0.73 / 0.76 0.40 / 0.44 11.3 / 11.0 1:25-2:45 1:20-2:35 0.70 -1.30 0.50 -0.85 -16.0 1.10 0.70 14.0 1:59 1:47 1.45 0.95 15.0...
- Page 64 Programme chart Crockery Food deposits Action required Variable, sensor-controlled Mixed, All fresh to dried-on programme sequence everyday crockery food deposits Shorter duration This needs a short programme Heat-sensitive glasses and plastic Shorter duration Fresh, easily removed food deposits This needs a gentle programme with glass care Shorter duration Mixed crockery...
- Page 65 Programme chart Programme Detergent Compartment I Compartment II 25 ml Sensor wash 1 tab +short 20 ml Quick wash 40°C 1 tab +short 20 ml Sensor wash gentle 1 tab +short 25 ml 1 tab 25 ml Light soiling 55°C 1 tab +short 25 ml...
-
Page 66: Further Programmes
SolarSave as Miele's dishwasher cleaner or condi‐ This programme does not heat the wa‐ tioner (see "Optional accessories - Dishwasher care products). Please fol‐... -
Page 67: Cleaning And Care
Cleaning and care Cleaning the door and the door Check your dishwasher regularly (ap‐ seal prox. every 4-6 months). This way faults and problems can be avoided. Mould could build up on the door seal and the sides of the dishwasher door ... -
Page 68: Cleaning The Door Front
– dishwasher cleaner, For cleaning, you can also use a clean, damp microfibre cloth, such as – oven cleaner, the Original Miele all purpose microfi‐ – glass cleaning agents, bre cloth, without any cleaning agent. – hard, abrasive brushes or sponges, e.g. -
Page 69: Checking The Filters In The Wash Cabinet
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it access‐ ing the circulation system and re-enter‐ ing the cabinet through the spray arms. - Page 70 Cleaning and care To clean the inside of the filter, the flap Replace the filter combination so that it lies flat in the base of the wash must be opened: cabinet. Press the catches together in the ...
-
Page 71: Cleaning The Spray Arms
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Switch the dishwasher off. Remove the spray arms as follows: ... -
Page 72: Problem Solving Guide
Reset or replace the fuse (see data plate for mini‐ mum fuse rating). If the mains fuse trips again, call Miele. The Start indicator light The appliance is not plugged in. does not flash after the ... - Page 73 Switch the dishwasher back on. Select the programme you want. Press the Start button. If the fault message appears again, there is a techni‐ cal fault. Call Miele. The Waterproof system has reacted. Waterproof Turn off the tap.
-
Page 74: Water Inlet Fault
Problem solving guide Water inlet fault Problem Possible cause and remedy One of the following messages appears in the display: The tap is turned off. Open stopcock Turn on the tap fully. Before rectifying the problem, you must: ... -
Page 75: Water Drainage Fault
Problem solving guide Water drainage fault Problem Possible cause and remedy The following fault mes‐ Before rectifying the problem, you must: sage appears in the dis‐ Switch the dishwasher off with the button. play: The water outlet is restricted. ... -
Page 76: General Problems
Problem solving guide General problems Problem Possible cause and remedy The indicator lights and The display has switched off automatically to save display are dark. energy. Switch the dishwasher on again with the but‐ ton. The interior lighting The interior lighting has been switched off perma‐... - Page 77 Problem solving guide Problem Possible cause and remedy Water remains in the Before rectifying the problem you must: wash cabinet at the end Switch the dishwasher off with the button. of a programme. The filter combination in the wash cabinet is clogged. ...
-
Page 78: Noises
Problem solving guide Noises Problem Possible cause and remedy Knocking noise in the A spray arm is knocking against an item in a basket. wash cabinet. Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the Items of crockery are insecure in the wash cabinet. -
Page 79: Unsatisfactory Washing Result
Problem solving guide Unsatisfactory washing result Problem Possible cause and remedy The dishes are not The dishes were not loaded correctly. clean. See notes in "Loading the dishwasher". The programme was not powerful enough. Select a more intensive programme (see "Pro‐ gramme chart"). - Page 80 Problem solving guide Problem Possible cause and remedy Dishes, cutlery and The amount of rinse aid may be insufficient, or the glasses are not dry or rinse aid reservoir is empty. are flecked. Replenish the reservoir, increase the dosage or change the brand of rinse aid (see "Before using for the first time - Rinse aid").
- Page 81 Problem solving guide Problem Possible cause and remedy White residue is visible Not enough rinse aid was used. on cutlery and crock‐ Increase the dosage (see "Settings menu - Rinse ery, clouding occurs on aid"). glassware; film can be There is no salt in the salt reservoir.
-
Page 82: Maintenance
Replace the filter and washer, making water inlet hose threaded union. This sure they are sitting correctly. filter is available from Miele. Reconnect the inlet hose to the tap, Cleaning the filter: making sure it goes on correctly and ... -
Page 83: Cleaning The Drain Pump And Non-Return Valve
Maintenance Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme, the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Disconnect the dishwasher from the mains supply. -
Page 84: After Sales Service
2 years. Miele. For further information, please refer to your warranty booklet. The contact details for Miele are giv‐ en at the back of these instructions. When contacting Miele, please quote the model and serial number of your... -
Page 85: Optional Accessories
– phosphate-free - safe for the environ‐ www.miele-shop.com (depending on ment country) or from Miele (see end of this booklet for contact details). – water-soluble wrapping - no need to unwrap Powder detergent –... - Page 86 Optional accessories Dishwasher care products Accessories Miele cleaning and care products pro‐ Some accessories may be supplied as vide optimum care for your dishwasher. standard, depending on model. Dishwasher cleaner Cappuccinatore insert – cleans the dishwasher effectively and The Cappuccinatore insert can be used...
-
Page 87: Electrical Connection
Electrical connection This dishwasher is supplied with a Before connecting the appliance, mains cable with moulded plug ready check that the connection data on for connection to an AC single phase the data plate (voltage, frequency, supply, (230 - 240 V 50 Hz for NZ and rated load and fuse rating) matches Australia) via a suitable switched sock‐... -
Page 88: Water Connection
Water connection The Miele Waterproof system Connection to the water sup‐ As long as your dishwasher has been installed correctly, the Miele waterproof Water in the dishwasher must anti-leak system will protect you from not be used as drinking water. - Page 89 Water connection – A tap with a 3/4 " male thread must After connecting the dishwasher to be provided on site. the water supply, check that all plumbing connections are watertight. – Connection to the mains water sup‐ ply should only be carried out by a ...
-
Page 90: Drainage
Water connection Drainage Venting the drainage system If the on-site drain connection is situ‐ – The appliance drainage system is fit‐ ated lower than the guide path for the ted with a non-return valve which bottom basket rollers in the open door, prevents dirty water from flowing the drainage system must be vented. -
Page 91: Technical Data
Technical data Dishwasher model Standard Height freestanding model 84.5 cm (adjustable + 3.5 cm) Height built-in model 80.5 cm (adjustable 84.5 cm (adjustable + 6.5 cm) + 6.5 cm) Height of building-in recess Min. 80.5 cm (+ 6.5 Min. 84.5 cm (+ 6.5 Width 59.8 cm 59.8 cm... -
Page 92: Settings Menu
Settings menu Settings menu for changing Language standard settings The display can be set to appear in one of several different languages. Opening the Settings menu You can change the language in the Switch the dishwasher off with the display via the sub-menu. -
Page 93: Time Of Day
Settings menu Time of day Setting the clock format You can select either a 24-hour or 12- The dishwasher is delivered with the hour clock. time of day (clock) display deactivated. Select the option. Clock format To save energy, the dishwasher will switch off automatically a few minutes ... -
Page 94: Water Hardness
Settings menu Water hardness °d mmol/l °f Display This appliance is fitted with a water softener. – The dishwasher must be program‐ med for the water hardness in your area. – Your local water authority will be able to advise you of the water hardness level in your area. -
Page 95: Rinse Aid
Settings menu Rinse aid Consumption (EcoFeedback) You can adjust the rinse aid dosage for You can programme the dishwasher so best results. that the energy and water consumption The rinse aid dosage can be set from of the currently selected programme approx. -
Page 96: Ecostart
Settings menu EcoStart Setting the electricity tariff times Before you can use the option, EcoStart In order to run your dishwasher in the you must set at least one electricity tar‐ most economical way, you can use the iff time. option to take advantage of EcoStart your electricity supplier's time variable... - Page 97 Settings menu Changing the electricity tariff times Deleting the electricity tariff times You can change the start, finish or pri‐ You can delete the settings for an ority of an electricity tariff time. electricity tariff time and in doing so deactivate the option for this EcoStart...
-
Page 98: Sensor Wash
Settings menu Sensor wash BrilliantLight You can adjust the Sensor wash pro‐ This dishwasher has interior lighting. gramme so that it will remove stubborn When the door is open, the lighting will soiling in a lightly soiled load. switch off automatically after 15 mi‐ nutes. -
Page 99: Check Filters
Settings menu Check filters Brightness You can adjust the interval at which the There are seven different display bright‐ message to remind you to check the fil‐ ness settings. ters appears. Select the brightness you want and You can set an interval of between 30 confirm this with OK. -
Page 100: Showroom Programme
Settings menu Showroom programme Factory default settings You can reset all settings to the factory For demonstration purposes only. default settings. The dishwasher is fitted with various Select and confirm with OK. Reset demonstration programmes for show‐ room use. Closing the Settings menu –... - Page 103 Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Miele Center and Head Office Melbourne: 1 Gilbert Park Drive Knoxfield, VIC 3180 Miele Center and Office Melbourne: 206-210 Coventry Street South Melbourne, VIC 3205 Miele Center and Office Sydney:...
- Page 104 G 6510 / G 6515 en-AU, NZ M.-Nr. 09 867 860 / 04...