When projecting from a rear or overhead position, reorient the image by selecting the correct Projection option (see page 5). 2 - Epson PowerLite Cinema 500 Projector Image Size and Projection Distance The maximum size of the image is determined by the distance from the projector’s lens to the screen.
If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift knob to center the image. Do not place the projector farther to the left or right than the edge of the screen, or you will not be able to project a square (or rectangular) image.
43, 60, 70, 75 × MAC13” × MAC16” × MAC19” 1024 4 - Epson PowerLite Cinema 500 Projector Turning the Projector On and Off 1. Connect the power cord to the projector and a grounded electrical outlet. Aspect ratio 16:9 1080 16:9 2.
Page 5
, the projector has been button on the remote control. Menu menu and select Screen Keystone arrow buttons to adjust the shape of the image. button when done. Menu Epson PowerLite Cinema 500 Projector - 5 menu, Setting menu, Setting Input A menu, Setting...
Note: You can fine-tune the color and other image quality settings using the projector’s menu system or the Cinema Color Editor software. See the User’s Guide for details. 6 - Epson PowerLite Cinema 500 Projector Choosing the Aspect Ratio Depending on the port to which your equipment is connected, your image can be automatically sized to fit on the screen when is selected as the Aspect setting.
If you don’t have one, gently clean the filter using a very soft brush, such as an artist’s paintbrush. If the dirt is difficult to remove or the filter is broken, replace it. Contact your dealer or call Epson at (800) 873-7766 and ask for part number V13H134A04 463-7766 for dealer referral.
Note: Lamp life results will vary depending on the selected mode, environmental conditions, and usage. Contact your dealer or call Epson at (800) 873-7766 in the United States for a replacement lamp. Request part number . In Canada, call (800) 463-7766 for dealer V13H010L28 referral.
1. Open Cinema Color Editor, then click the tab. 2. Click one of the buttons for the options shown above. 10 - Epson PowerLite Cinema 500 Projector Adjusting the Picture Quality You can use Cinema Color Editor in place of the projector’s menu system to adjust the image.
S-video cable You can purchase these accessories from your dealer, by calling Epson at (800) 873-7766, or by visiting the Epson Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.