Table of Contents
Advertisement
ifm
Operating Instructions IO-Link Master with Profinet interface PowerLine 4 Ports IP 65 / IP 67 (AL1200)
Operation
>
9.2.1
Web interface: Read device and diagnostic information
In order to read the diagnostic information about the current device status via the web interface:
► Connect laptop/PC and AL1200 via the Ethernet internet.
► Start web browser.
► Enter the following into the address field of the browser: and confirm with [ENTER]:
<IP address of the device>
>
Web browser shows the web interface of the device.
>
The page shows the following data:
Table with connected IO-Link devices
Name
[Port]
[Mode]
[Comm. Mode]
[MasterCycleTime]
[Vendor ID]
[Device ID]
[Name]
[Serial]
[LR Interval]
Version information of the installed firmware components
Name
[Firmware version]
[FirmwareCN Version]
[Bootloader Version]
[NETX Firmware Version]
Diagnostic information of the device
Name
[Current]
[Voltage]
[Short Circuit]
[Temperature]
The page of the device is constantly updated. This is why the data is always up-to-date.
Description
Number of the IO-Link interface
Operating mode of the IO-Link interface
Baud rate of the IO-Link interface
Cycle time
ID of the manufacturer of the IO-Link device
ID of the IO-Link device
Article number of the IO-Link device
For ifm articles: This article number is stored along with a link to the produkt page on
the ifm website.
Serial number of the IO-Link device
Cycle time for the communication with the SmartObserver
Description
Firmware version
Version of the firmware container
Version of the boot loader
Version of the Profinet firmware
Description
Current (in mA)
Voltage (in mV)
Number of detected short circuits
Device temperature (in °C)
2017-06-02
12744
55
Advertisement
Table of Contents
