3DTV STEREODRIVER 2001 Quick Start Manual

Table of Contents

Download this manual

3DTV CORP STEREODRIVER MODEL 2001

The Model 2001 is meant to be used with wired LCD shutter glasses and 50hz (PAL,

SECAM) or 60hz (NTSC) 3D field sequential (i.e., right/left alternating) video and

tube type (CRT) TV's. For higher frequency TV or PC see our other products.

Connect a standard RCA audio or video cord from the composite VIDEO OUT (a

yellow RCA jack) of your VCR, VCD or DVD player, STB (set top box--i.e., cable or

satellite) or TV to either RCA jack on the Model 2001.

Most DVD players, including BluRay players, will play any of the 50 titles of

standard definition 3D DVD's available in 3D on a CRT tv or (with vga to tv

converter boxes available on the net) on a pc CRT monitor or on certain DLP

projectors or TV's (see the faq on our page

www.3dtv.jp

for info). Some DVD

players may combine the two images and there may be no way to uncombine them

to get 3D. You will have to get a different DVD player.

Plug the stereo jack of the wired LCD shutter glasses into either of the mini jacks on

the 2001. Up to 6 wired glasses can be plugged in using standard stereo headphone

splitter plugs.

Plug in the DC adapter (not provided) and the green LED will light. To turn off the

unit unplug the DC adapter. Neither the driver not the glasses will be harmed if left

on and they use a very little electricity but it is best to unplug the power supply

when finished viewing 3D. If you wish to sit further from the TV, you may use a

standard stereo headphone extension cord between the StereoDriver and the

glasses or an RCA extension cord to the video source.

There is no standard for right/left eye polarity of standard field sequential 3D

DVD's. If your 3D image looks strange turn the glasses upside down and if it now

looks ok then use the enclosed stereo reversal cable (the 4 inch --6cm-- long stereo

cable) between your glasses and the Model 2001 StereoDriver to reverse the

images.

For European User's

Table of Contents

Page 1 3DTV CORP STEREODRIVER MODEL 2001 The Model 2001 is meant to be used with wired LCD shutter glasses and 50hz (PAL, SECAM) or 60hz (NTSC) 3D field sequential (i.e., right/left alternating) video and tube type (CRT) TV‘s. For higher frequency TV or PC see our other products.
Page 2 3D images, if you begin to feel dizziness, fatigue, eyestrain, or headache, discontinue use. UNITS GUARANTEED FOR 30 DAYS. GUARANTEE DOES NOT COVER EXPOSURE TO; HEAT, LIQUIDS, DROPPING OR OTHER ABUSE. UNIT WILL BE REPAIRED OR REPLACED AT OUR DISCRETION. RETURN DEFECTIVE UNITS TO 3DTV CORP. OR...
Page 3 YOUR DISTRIBUTOR. Adapting Your Visual System To LCD Shuttering Glasses When using shutter glasses with computer or video systems with a frequency of less than 120hz there will be some flicker which should be minimized or eliminated by reducing room illumination and adjusting the TV or monitor brightness with the glasses on and the program running.
Page 4 3DTV Corporation be liable for indirect or consequential damages resulting from the use of its products or from any error or defect in the product or documentation. ln no event shall 3DTV Corporations liability exceed the price paid for the product.