Page 2
ID is a combination of twelve letters and numbers. Be sure to enter all of the characters. After you have chosen a plan and activated, please follow the step-by-step installation guide to set up your equipment. D-Link VTA User Manual...
* If you purchased your Vonage Telephone Adapter from a retail location, you must first activate your Vonage phone service by visiting www.vonage. com/activate. After activation, wait 30 minutes before checking for a dial tone. D-Link VTA User Manual Package Contents Stand Blue Ethernet Cable...
#1 and if you’ve signed up for a second Vonage phone line, an optional phone or FAX machine into phone port #2. D-Link VTA User Manual Front Panel Internet Phone 1 Solid light indicates Solid light indicates connectivity to your...
The Phone 2 light will be a solid green if you have a second Vonage line. (The Internet light will blink whenever there is data activity.) D-Link VTA User Manual Connect the included power supply to the Power port of the Telephone Adapter.
Page 10
Vonage phone service right NOW. Bon Vonage! 911 Service: Vonage’s 911 offering is different from that offered by traditional telephone companies; please visit www.vonage.com/911 to learn more about it. D-Link VTA User Manual...
IP address as detailed in the Static IP Address section. Then you may once again disable DHCP on your router. Note: The terms MAC Address and MAC ID are used interchangeably. D-Link VTA User Manual...
Chapter 3 - Configuration Login Open a web browser such as Internet Explorer and enter the IP address (e.g. 192.168.0.100) of the Vonage VTA adapter. Enter user for the username and user for the password. Click the Login button. D-Link VTA User Manual...
If you want to statically assign an IP address, click Static IP Address. Enter the IP address, subnet mask, and default gateway address you would like to assign to the Vonage VTA. The default gateway address must be the IP address of your router or gateway. D-Link VTA User Manual...
Chapter 3 - Configuration Password You may change the User password on this page. Enter a new password and click Apply to save. D-Link VTA User Manual...
Chapter 3 - Configuration Save&Reboot Click Reboot to restart the Vonage VTA device. Logout Click Logout to exit the configuration utility. Click OK to verify. D-Link VTA User Manual...
Appendix A - Troubleshooting Appendix A - Troubleshooting Troubleshooting D-Link VTA User Manual...
Page 19
Vonage phone. Note: You will receive email notification from Vonage when the phone number transfer has completed. The temporary number will then be terminated. • For more troubleshooting tips, visit www.vonage.com/help. D-Link VTA User Manual...
Page 20
3 blinks (3 blinks, pause, repeat) 4 blinks (4 blinks, pause, repeat) Rapid Blinking Solid D-Link VTA User Manual VTA is powering up VTA is obtaining an IP address VTA is obtaining configuration from Vonage VTA is registering with Vonage Downloading/upgrading firmware (do not power down)
Appendix B - Technical Specifications Appendix B - Technical Specifications Technical Specs D-Link VTA User Manual...
Page 22
Standards Connection Port Ethernet Port Telephony Support Quality of Service (QoS) Fax Support LEDs Power D-Link VTA User Manual • IP • TCP • UDP • ARP • HTTP • RJ-11, 2 FXS Port • RJ-45 Ethernet Port • IEEE 802.3 for 10M Ethernet •...