Related Manuals for BAFANG DP E12.CAN
Summary of Contents for BAFANG DP E12.CAN
-
Page 1: Table Of Contents
7 USER MANUAL FOR DP E12.CAN CONTENT 7.1 Important Notice 7.6.1 Switching the System ON/OFF 7.2 Introduction of Display 7.6.2 Selection of Support Levels 7.3 Product Description 7.6.3 Headlights / backlighting 7.6.4 Walk Assistance 7.3.1 Specifications 7.6.5 Battery Capacity Indication 7.3.2 Functions Overview... -
Page 2: Important Notice
• Do not clean the display with a steam jet, high-pressure cleaner or water hose. 7.2 INTRODUCTION OF DISPLAY • Model: DP E12.CAN BUS • The label marking is as follows: • The housing material is PC1414, the indica- tor is blue LED, as following: Note: Please keep the QR code label attached to the display cable. -
Page 3: Product Description
• Indication for the range. (Note: this function 7.3.2 Functional Overview works with APP via BLE)). • Battery capacity indicator • Bluetooth function.(the display can connect to the mobile through Bafang Go APP) • Indication of performance support • Walk assistance 7.4 DISPLAY Bluetooth indicate... -
Page 4: Normal Operation
7.6 NORMAL OPERATION 7.6.1 Switching the System ON/OFF Press and hold (>2S) on the display to turn on the system. Press and hold (>2S) again to turn off the system. 7.6.2 Selection of Support Levels When the display is turned on, press the (<0.5S) button to switch to the support level, the lowest level is 1, the highest level is 4. -
Page 5: Battery Capacity Indication
After releasing the button, the motor stops automatically. The Level indicators stop This display can works with APP (BAFANG flash and the level 4 indicator starts to flash. GO) via Bluetooth, all information can be If no any operation is happened in 5 second,... -
Page 6: Error Code Definition
7.7 ERROR CODE DEFINITION The display can show the errors of a pedelec. When the fault is detected, the error code will be displayed through the level indicator in flashing. Level 1 indicates the Level 2 tens digit of an error code while level 2 indicates the units digit. For example: Level 1 1) Error code 04 The LED indicator for level 1 does not light, and level 2 flickers for 4 times. - Page 7 Error Declaration Troubleshooting Error with the temperature sensor Please contact your retailer. inside of the battery 1. Turn off the system and let the pedelec cool The protection temperature inside down. the controller has reached its maxi- 2. If the problem persists, please contact your mum protection value retailer.
- Page 8 Error Declaration Troubleshooting 1. Check all connectors. Brake signal has an error 2. If the error continues to occur, please con- (If brake sensors are fitted) tact your retailer. Detection circuit for 15V has an error Please contact your retailer. Detection circuit on the keypad has Please contact your retailer.