Page 1 ® Satellite Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 166 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information...
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct Computer if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 16 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Bluetooth Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct Computer if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 23 CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 Systems Incorporated in the United States and/or other countries. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Selecting a place to work ...38 Creating a computer-friendly environment...38 Keeping yourself comfortable ...39 Precautions...39 General Precautions...41 Important information on your computer’s Setting up your computer ...43 Setting up your software...43 Registering your computer with Toshiba ...45 Adding optional external devices...45 cooling fan ...42...
Page 27 Connecting to a power source ...46 Charging the main battery...49 Using the computer for the first time ...50 Opening the display panel ...50 Your computer’s features and specifications ...51 Turning on the power...51 Adding memory (optional) ...52 Installing a memory module ...53 Removing a memory module...58 Checking total memory ...60 Using the TouchPad™...61...
Page 28 Playing an audio CD...99 Playing CDs ...101 Creating a CD/DVD...101 Removing a disc with the computer on...102 Removing a disc with the computer off ...103 Caring for CD or DVD discs ...103 Toshiba’s online resources ...104 keyboard ...84 ® Explorer...88...
Page 29 Chapter 3: Mobile Computing ...105 Toshiba’s energy-saver design...105 Running the computer on battery power ...105 Battery Notice ...106 Power management ...107 Using additional batteries ...107 Charging batteries...108 Charging the main battery...108 Charging the RTC battery...109 Monitoring main battery power...111 Determining remaining battery power...112 What to do when the main battery runs low ...113...
Page 30 TOSHIBA Power Saver ...159 Preset Power Profiles ...160 Quickly creating a new power profile ...160 Customizing a power profile ...160 TOSHIBA Touch and Launch Utility...161 TOSHIBA Touch and Launch Settings...164 Disabling or enabling TOSHIBA Touch and the Internet ...147 Launch ...165...
Page 31 Wireless networking problems ...193 DVD operating problems...196 Develop good computing habits ...199 Data and system configuration backup in If you need further assistance...206 Before you contact Toshiba ...206 Contacting Toshiba ...207 Other Toshiba Internet Web sites...208 Toshiba’s worldwide offices...208 ®...
Page 32 Wireless setting ...216 Disabling or enabling the TouchPad ...216 Keyboard hot keys ...217 Appendix B: Power Cord/Cable Connectors ... 218 Appendix C: Using ConfigFree™ with your Toshiba Computer ... 219 Getting Started...220 Starting ConfigFree ...220 ConfigFree Utilities...222 Connectivity Doctor ...222 Search for Wireless Devices ...225...
Page 33: Introduction
2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its notebook component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 34: This Guide
Toshiba’ s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/ options availability are all subject to change without notice.
Page 35: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 36: Other Icons Used
Toshiba Instruction Manual for Safety and Comfort ❖ Limited Warranty information ❖ Satellite L30/L35 Recovery (DVD) ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba’s Web site at accessories.toshiba.com.
Page 37: Service Options
Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page Options You can add a number of options to make your computer even more powerful and convenient to use.
Page 38: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 39: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 40 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 41: General Precautions
Ask your dealer to help you. General Precautions Toshiba computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
Page 42: Important Information On Your Computer's Cooling Fan
Getting Started Selecting a place to work PC Card overheating Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long time.
Page 43: Setting Up Your Computer
Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to and including adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards. Your computer contains a rechargeable main battery that needs to be charged before you can use it.
Page 44 Getting Started Setting up your computer The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. From the Welcome screen click Next to enter the Setup Wizard. Confirm acceptance of Microsoft’s End User License Agreement and click Next.
Page 45: Registering Your Computer With Toshiba
Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed during the initial start up process of your computer. If you decide not to register at that time, you can...
Page 46: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 47 Power cord/cable AC adaptor (Sample Illustration) Power cord/cable and AC adaptor To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 48 Getting Started Connecting to a power source Plug the AC adaptor cord into the DC-IN on the back of the computer. (Sample Illustration) Connecting the AC adaptor to the computer Connect the power cord/cable to a live electrical outlet. The AC power and battery light on the indicator panel glows green.
Page 49: Charging The Main Battery
NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack. See page 117 Charging the main battery Your computer came with its battery already installed.
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel.
Page 51: Your Computer's Features And Specifications
Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology.
Page 52: Adding Memory (Optional)
Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process...
Page 53: Installing A Memory Module
Use only compatible memory modules. See your Toshiba dealer for details. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer.
Page 54 Getting Started Adding memory (optional) If the computer is on, begin at step 1; otherwise, skip to step 3. Click Start, and then Turn Off Computer or Shut Down, depending on the system (for more information, “Turn Off or Shut Down” on page Click Turn Off or Shut Down.
Page 55 Using a small Phillips screwdriver, unscrew the screws that secure the memory module slot cover. Front of computer (Sample Illustration) Unscrewing the memory module slot cover Remove the memory module slot cover. Place the screws and the cover in a safe place so that you can retrieve them later.
Page 56 Getting Started Adding memory (optional) If no memory slot is available, you must remove a module by NOTE performing steps page NOTE If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module.
Page 57 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module.
Page 58: Removing A Memory Module
Getting Started Adding memory (optional) Replace the memory module slot cover and secure it using the screws. Re-insert the main battery. For more information on inserting the main battery, see battery” on page Turn the computer right side up. Reconnect the cables. Restart the computer.
Page 59 Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 60 Getting Started Adding memory (optional) Gently lift the memory module to a 30-degree angle and slide it out of the slot. Memory slots (Sample Illustration) Removing the memory module Replace the memory module slot cover and tighten the screws. Re-insert the main battery. For more information on inserting the main battery, see battery”...
Page 61: Checking Total Memory
Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, Performance and Maintenance, and then System. The General tab view automatically appears and shows total memory.
Page 62: Disabling Or Enabling The Touchpad
Getting Started Using the TouchPad™ Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons. Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against the TouchPad.
Page 63 Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. (Sample Image) TouchPAD ON/OFF screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Getting Started Using the TouchPad™...
Page 64: Using External Display Devices
Getting Started Using external display devices Close the Printers and Other Hardware window. Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad. See page 216. Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external monitor or projector to the available video port via the RGB (monitor) port.
Page 65: Directing The Display Output When You Turn On The Computer
Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press While holding down...
Page 66: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
Page 67: Connecting A Printer
Connecting a printer Your printer documentation may require you to install the NOTE printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 68: Setting Up A Printer
Getting Started Connecting a printer Setting up a printer Some printers require a specific installation process. Refer to NOTE your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time.
Page 69: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. (Sample Illustration) Optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports.
Page 70: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the Windows work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/or drive.
Page 71: Hibernation Mode
❖ If you have work in progress and are not connected to a network, use the Windows commands to save your system settings so that, when you turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off.
Page 72: Standby Mode
Getting Started Turning off the computer For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page Standby mode The Standby command places the computer into a power- saving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off.
Page 73: Using The Turn Off Computer Or Shut Down Commands
Using the Turn Off Computer or Shut Down commands Depending on the operating system installed, use the following steps to turn off your computer. Turn Off For Windows Professional or Windows domain server, follow these steps to turn off the computer: Click Start, and then Turn Off Computer.
Page 74 TOSHIBA’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click on the Setup Action tab. (Sample Image) Setup action settings screen Select the options you want from the drop-down lists.
Page 75: Using And Configuring Hibernation Mode
Click OK. For more information about the Power Saver utility, see NOTE “TOSHIBA Power Saver” on page Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set.
Page 76 To use any of these methods, you first need to enable them in TOSHIBA’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖...
Page 77: Using And Configuring Standby Mode
Standby mode. To use any of these methods, you first need to enable them in TOSHIBA’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance.
Page 78 Getting Started Turning off the computer Click the TOSHIBA Power Saver icon. Click the Setup Action tab. Select Standby for the options you want. ❖ When I press the power button Set this option to Standby if you want the computer to go into Standby mode when you press the power button.
Page 79: Closing The Display Panel
Closing the display panel After you have turned off the computer, close the display panel to keep dust and dirt out of the computer. Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see page 122.
Page 80: Using A Computer Lock
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 81: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 82 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 83: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 84: Making Your Keyboard Emulate A Full-Size Keyboard
Learning the Basics Using the keyboard Making your keyboard emulate a full-size keyboard Although your computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. A standard full-size keyboard has two editing keys; cursor positioning keys; and a numeric keypad. Pressing the of the specially marked keys allows you to emulate a full-size keyboard.
Page 85: Function Keys
Function keys The function keys (not to be confused with the 12 keys at the top of the keyboard. (Sample Illustration) Function keys through programmed functions when pressed. Used in combination with the specific functions on the computer. For example, off the TouchPad.
Page 86: Overlay Keys
Learning the Basics Using the keyboard Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard.
Page 87: Starting A Program
Using the overlay for cursor control The keys with the gray arrows and symbols on their left front are the cursor control overlay keys. To turn the cursor control overlay on, press simultaneously. The cursor control mode light on the keyboard indicator panel glows when the cursor control overlay is on.
Page 88: Starting A Program From The Start Menu
Learning the Basics Starting a program Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the Windows Click Start, and then All Programs.
Page 89: Starting A Program From The Run Dialog Box
In the left part of the window, click the line that ends in “(C:).” In the left part of the window, under the C: icon, double- click the folder containing the program, in this case Program Files. Windows Files folder on the right side of the window. The left side of the window shows all the folders contained within the Program Files folder.
Page 90: Saving Your Work
Learning the Basics Saving your work In the Run dialog box: ❖ If you know the program’s location, type the command line. For a program in the Windows folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: then click OK.
Page 91: Saving Files
Saving files In your Windows If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box. Use this dialog box to specify where to store the document and to give it a file name.
Page 92: File Names
Learning the Basics Saving your work File names The Windows operating system supports long file names that can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % &...
Page 93: Printing Your Work
Printing your work Ensure the operating system is set up for your printer as described in HINT: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the Windows system to run with the additional printer(s).
Page 94: Backing Up Your Work
Learning the Basics Backing up your work Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, diskettes, or to a network, if available.
Page 95: Using The Optical Drive
Using the optical drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Page 96: Writable Discs
Learning the Basics Using the optical drive Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release the disc tray. Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive.
Page 97: Inserting A Compact Disc
Inserting a compact disc To insert a compact disc into the drive: Make sure the computer is turned on. The drive will not open if the computer’s power is off. Make sure the drive’s in-use indicator light is off. Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch).
Page 98 Learning the Basics Using the optical drive Place the disc carefully in the disc tray, label side up. (Sample Illustration) Positioning the disc in the drive Gently press the disc onto the center spindle until it clicks into place. NOTE When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray.
Page 99: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. If the CD/DVD is not seated properly when the drawer is closed, the disc might be damaged. Also, the drawer might not open fully when you press the eject button.
Page 100 Learning the Basics Using the optical drive Stop button Play/Pause button (Sample Image) Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button. ❖...
Page 101: Playing Cds
Playing CDs If you insert a CD/DVD into the optical drive and the Auto- Run feature does not automatically start your disc, try launching the CD/DVD manually. To do this, follow these steps: Click Start, and then My Computer. Click the optical drive icon. The disc drive will run the CD/DVD.
Page 102: Removing A Disc With The Computer On
These problems are not due to any defect in your Toshiba computer or optical drive. Please refer to your computer's product specification for listing of specific format compatibilities.
Page 103: Removing A Disc With The Computer Off
Removing a disc with the computer off To remove a disc with the computer turned off: Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch). Never use a pencil to press the manual eject button.
Page 104: Toshiba's Online Resources
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 105: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 106: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 107: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 108: Charging Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 109: Charging The Rtc Battery
❖ The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes. HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely.
Page 110 Mobile Computing Charging batteries It is seldom necessary to charge the RTC battery because it NOTE charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.
Page 111: Monitoring Main Battery Power
Monitoring main battery power The computer’s main battery light gives you an indication of the main battery’s current charge: ❖ Glows amber while the main battery is being charged (AC adaptor connected). ❖ Glows green when the main battery is fully charged. ❖...
Page 112: Determining Remaining Battery Power
Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. Click the TOSHIBA Power Saver icon. The Power Saver Properties window appears. The remaining battery charge is indicated on the left side of the dialog box.
Page 113: What To Do When The Main Battery Runs Low
TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 114: Setting Battery Alarms
To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. Click the Setup Action tab. Configure the Alarm settings to suit your needs. Conserving battery power...
Page 115: Power Profiles
Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 116: Using A Hot Key To Set The Power Profile
Normal, DVD Playback, Presentation, and Long Life. Release the The pop-up window disappears. You are now in the selected mode. For more information on setting the battery Power Profile, “TOSHIBA Power Saver” on page “TOSHIBA Power Saver” on simultaneously to display the Power key. , press until you select the 159.
Page 117: Changing The Main Battery
Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 118: Removing The Battery From The Computer
Mobile Computing Changing the main battery Removing the battery from the computer To remove the battery: Save your work. Turn off the computer or place it in Hibernation mode according to the instructions in Hibernation mode” on page Unplug and remove any cables connected to the computer, including the AC adaptor.
Page 119 Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations.
Page 120: Inserting A Charged Battery
Mobile Computing Changing the main battery When handling battery packs, do not short-circuit the terminals. Also do not drop, hit or otherwise apply impact; do not scratch or break the casing and do not twist or bend the battery pack. Do not remove the battery pack while the computer is in Standby Mode.
Page 121 (Sample Illustration) Inserting the battery Slide the battery lock to the locked position. (Sample Illustration) Locking the battery release lock Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page Restart the computer.
Page 122: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 123: Maximizing Battery Operating Time
How you configure the computer (for example, whether you enable battery-power saving options). The computer provides a battery save mode, which can be set in the TOSHIBA Power Saver to conserve battery power. This mode has the following options: ❖...
Page 124: Maintaining Your Battery
Mobile Computing Taking care of your battery ❖ Operating time decreases at low temperatures. ❖ The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter.
Page 125: Disposing Of Used Batteries
❖ If you will not be using the system for an extended period, more than one month, remove the battery pack. ❖ If you are not going to use the computer for more than eight hours, disconnect the AC adaptor. ❖...
Page 126 If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle, a program of the Rechargeable Battery Recycling Corporation. For more information and for drop-off locations, visit 8837.
Page 127: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshiba’s Web site at accessories.toshiba.com.
Page 128: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows programs, find documents, set up system components, and perform most other computing tasks.
Page 129: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, System tray, and background pattern. Icons Start button Taskbar System tray ® (Sample Image) Windows operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 130 Exploring Your Computer’s Features Exploring the desktop The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette or flash media, it does not go into the Recycle Bin.
Page 131: Setting Up For Communications
Taskbar Each time you open a program, a button associated with that program appears on the Taskbar. With some programs, a button appears on the Taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 132 Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 133: Modem
To select a region, follow the steps below. Click Start, All Programs, Toshiba, Networking, and then click Modem Region Select. Do not use the Country/Region Select function in the Modem NOTE setup utility in the Control Panel if the function is available.
Page 134 Exploring Your Computer’s Features Setting up for communications The Region Selection icon will appear in the Task Bar. Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed.
Page 135: Connecting The Modem To A Telephone Line
Open dialog box, if the modem and Telephony Current Location region code do not match A warning dialog box is displayed if current settings for region code and telephony location are incorrect. Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed.
Page 136 Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 137: Disconnecting
Connect the built-in modem only to ordinary analog phone NOTE lines. Never connect the built-in modem to a digital line (ISDN). Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX). Never connect the built-in modem to a key telephone system for residences or offices.
Page 138: Connecting Your Computer To A Network
Exploring Your Computer’s Features Setting up for communications Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. LAN cable types The computer must be configured properly before connecting NOTE to a LAN.
Page 139 Exploring Your Computer’s Features Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. Disconnect the cable from the LAN hub in the same manner.
Page 140: Wireless Lan
Exploring Your Computer’s Features Setting up for communications How to disable the Ethernet LAN port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply.
Page 141: Wireless Communication Switch
Toshiba strongly recommends the customer to enable the encryption function. ❖ Toshiba is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Wireless communication switch You can enable or disable the Wireless LAN function, with the on/off switch.
Page 142: Wireless Communication Indicator
Exploring Your Computer’s Features Setting up for communications Wireless communication indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indicator off Indicator glows This does not indicate that the wireless LAN is configured or NOTE connected.
Page 143 Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited. Your system may come with an optional wireless LAN module.
Page 144: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖...
Page 145: Internet Service Providers
Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection. You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and...
Page 146: Surfing The Internet
Exploring Your Computer’s Features An overview of using the Internet If you are using your computer at the office, then you probably connect to the Internet through your company’s network. See your network administrator about connecting to the Internet. Surfing the Internet Once connected to the Internet, the Web browser displays a home page.
Page 147: Uploading To, And Downloading Files From, The Internet
❖ Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board.
Page 148: Using A Microphone
Exploring Your Computer’s Features Exploring audio features Using a microphone Connect an external microphone to the computer. Click Start, All Programs, Accessories, Entertainment, and then Sound Recorder. Positioning (Sample Image) Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button.
Page 149: Using External Speakers Or Headphones
Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. Before putting on headphones to listen to an audio CD, turn the volume dial down.
Page 150: Sound System
Exploring Your Computer’s Features Exploring audio features Sound System This section describes audio controls including sound levels and power management. Volume control The Volume Control utility lets you control the audio volume in Windows for both playback and recording. ❖ To launch Volume Control for playback, click Start, All Programs, Accessories, Entertainment, and then click Volume Control.
Page 151: Using Pc Cards
Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Your notebook computer comes with a PC Card slot and supports two types of PC Cards that you can install: ❖...
Page 152: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards To insert a PC Card: Locate the PC Card slot on the left side of the computer. Insert the PC Card. (Sample Illustration) Inserting a PC Card When the card is almost all the way into the slot, push firmly but gently to ensure a firm connection with the computer.
Page 153: Setting Up A Pc Card For Your Computer
Press the PC Card eject button once to pop it out slightly, and push it in to remove the PC Card. The PC Card ejects slightly from the slot. Grasp the edges of the PC Card and slide it out of the slot.
Page 154: Chapter 5: Toshiba Utilities
Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter. ❖ TOSHIBA Power Saver ❖ PC Diagnostic Tool Utility ❖ TOSHIBA Hotkey Utility ❖ TOSHIBA Touch and Launch Utility...
Page 155: Toshiba Assist
TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 156: Connect
Protect & Fix The feature available in this category is the: ❖ PC Diagnostic Tool Optimize The features available in this category are: ❖ TOSHIBA Hotkey Utility ❖ TOSHIBA Power Saver ❖ TOSHIBA Touch and Launch Utility Connectivity Doctor Utility.
Page 157: Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. To use the PC Diagnostic Tool utility: Click Start, All Programs, Toshiba, Utilities, and then PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of The PC Diagnostic Tool window appears.
Page 158: Toshiba Hotkey Utility
TOSHIBA Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ To activate the Hotkey utility: Click Start, All Programs, Toshiba, Utilities, and then Hotkey utility.
Page 159: Toshiba Power Saver
The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window The Profile panel on the left of the TOSHIBA Power Saver Properties window shows the power profiles used to control power usage for both AC power and battery power, as well as the estimated battery life for each power profile mode.
Page 160: Preset Power Profiles
TOSHIBA Utilities TOSHIBA Power Saver Preset Power Profiles The preset power profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life These profiles cannot be deleted. It is not recommended to change the settings of these profiles. If you need a custom profile, create a new profile with the properties you require.
Page 161: Toshiba Touch And Launch Utility
A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon’s function.
Page 162 If the icon is highlighted in orange and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window closes. If the icon is highlighted in blue and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window remains open.
Page 163 TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcuts: ❖...
Page 164: Toshiba Touch And Launch Settings
In the Corner Assignment section, you can change the icons you see at the four corners of the TOSHIBA Touch and Launch window using the drop-down list boxes. The icons are referred to as tables in the TOSHIBA Touch and Launch Settings dialog box.
Page 165: Disabling Or Enabling Toshiba Touch And Launch
The Option button allows you to define how folders will open, define visual effects, and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.
Page 166: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 167 To close a program that has stopped responding: Press , and Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 168: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Your program performs an illegal operation. If you receive the message, “ close the window and continue working. If it operation ” happens again, record the details of the message and consult the software manufacturer.
Page 169 Problems when you turn on the computer If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.
Page 170: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working Always save your data even when you are using Standby. If your battery fully discharges, information that has not been saved will be lost. Your computer can be configured to warn you when the battery is running low see the main battery runs low”...
Page 171: Using Startup Options To Fix Problems
The Windows® operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
Page 172: Internet Problems
If Something Goes Wrong The Windows® operating system is not working See your Windows If your computer is connected to a network, the Startup menu NOTE may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 173: Resolving A Hardware Conflict
Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 174: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work.
Page 175 Plug and Play With Plug and Play and the operating system, avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/output system) and the operating system to automatically assign system resources to Plug and Play-compliant devices. In theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources.
Page 176: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 177 To check a device’s properties: Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. To view the device(s) installed, double-click the device type. To view the properties, double-click the device. The operating system displays the Device Properties dialog box, which provides an array of tabs.
Page 178: Memory Problems
If Something Goes Wrong Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, Turn Off/Shut Down Computer. Click Turn Off/Shut Down. The operating system shuts down and turns off the computer automatically.
Page 179 Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adaptor and power cord/cable. Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 180: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 181: Display Problems
You have connected an external keyboard and the operating system displays one or more keyboard error messages. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard. Nothing happens when you press the keys on the external keyboard.
Page 182 If Something Goes Wrong Resolving a hardware conflict If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. ❖ Check that the cable connecting the external monitor to the computer is firmly attached.
Page 183 A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 184: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them.
Page 185 You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors Click Start. Error-checking tests and repairs the disk. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented.
Page 186: Optical Drive Problems
If Something Goes Wrong Resolving a hardware conflict The computer displays the message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette.
Page 187: Sound System Problems
If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next to the optical drive eject button on the face of the optical drive tray.
Page 188: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
Page 189 If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system. Contact the manufacturer of the PC Card for information about using the card under the operating system.
Page 190 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.
Page 191: Printer Problems
A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems.
Page 192: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. 132.
Page 193: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 194 If Something Goes Wrong Resolving a hardware conflict ❖ Check the Control Panel’s Device Manager to verify that the Wi-Fi adapter is recognized by Windows the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 195 ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖ Enter PING 192.168.1.1 at the command prompt, and press Enter.
Page 196: Dvd Operating Problems
If Something Goes Wrong DVD operating problems Select Allow me to connect to the selected wireless network, even though it is not secure. Windows XP will now try to establish a wireless connection. The Windows XP wireless management facility does not work.
Page 197 “Checking device properties” on page 176 instructions on using Device Manager to view the optical drive properties. Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 198 If Something Goes Wrong DVD operating problems Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion.
Page 199: Develop Good Computing Habits
Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 200: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Read the user’s guides. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Page 201 Under Pick a Task, click Undo changes to your computer with System Restore. Click Create a restore point, and then click Next. In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.”...
Page 202 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 203 NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 204 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear. Click Next. Click Export Favorites, Next.
Page 205 General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe such as special toolbars for your web browser).
Page 206: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your...
Page 207: Contacting Toshiba
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 208: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 209 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome...
Page 210: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 211: Password Security
Password security This hot key blanks the display. Without a password activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password activates instant security. If you set a blank screen saver, pressing the combination to activate instant security will cause the screen to go blank.
Page 212: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 213: Power Profile
This hot key displays the power profile pop-up window and cycles through the power profiles. (Sample Image) Power profiles The properties of each power profile are set in the TOSHIBA Power Saver utility. For more information, see page Standby mode This hot key places the computer into Standby mode.
Page 214: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box. (Sample Image) Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond.
Page 215: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: ❖ ❖ ❖ (Sample Image) Display options window To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 216: Wireless Setting
Hot Keys Wireless setting Wireless setting This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) Pressing active wireless devices if the wireless communica- tion switch is turned on.
Page 217: Keyboard Hot Keys
Keyboard hot keys This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. This hot key decreases the sound volume. After you press this hot key an icon showing the new setting is displayed for two seconds.
Page 218: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 219: Appendix C: Using Configfree™ With Your Toshiba Computer
Appendix C Using ConfigFree your Toshiba Computer All references to Bluetooth NOTE only if Bluetooth is available on your system. ™ ConfigFree communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 220: Getting Started
Click Start, All Programs, Toshiba, Networking, and then ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. “Search for Wireless Devices” on 230. “ConfigFree 234.
Page 221: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ❖ Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the Taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop.
Page 222: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 223 Using ConfigFree™ with your Toshiba Computer ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 224 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen, and an orange frame describes the relevant location.
Page 225: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 226 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2 or above. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 227 Using ConfigFree™ with your Toshiba Computer (Sample Image) Dragging a device to the Access Point (Sample Image) Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 228 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 229 Using ConfigFree™ with your Toshiba Computer (Sample Image) Dragging the file to the Bluetooth icon To be prompted for the device: Drag and drop the file to the Bluetooth ConfigFree Launcher. (Sample Image) Dragging the file to the Bluetooth icon Or, you can right-click the file and select Send to Bluetooth Devices.
Page 230: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Selecting Send to Bluetooth Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth To disconnect from a Bluetooth Place the cursor on top of the connected line.
Page 231 Using ConfigFree™ with your Toshiba Computer A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: ❖ Internet settings—includes LAN settings (proxy server settings) and the address of a home page that opens automatically when Internet Explorer starts.
Page 232 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click Change Icon and select an icon for this profile. Click the more capture options. Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings.
Page 233 Using ConfigFree™ with your Toshiba Computer (Sample Image) Expanded Add Profile screen The online Help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported.
Page 234: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 235 Using ConfigFree™ with your Toshiba Computer (Sample Image) Users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Page 236 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center...
Page 237 Using ConfigFree™ with your Toshiba Computer Click SUMMIT. Other users appear on the SUMMIT main window. SUMMIT can also be started from the ConfigFree Launcher. NOTE Select the appropriate users and invite them to the SUMMIT meeting. As users join the SUMMIT, their icons appear on the SUMMIT table.
Page 238: Quick Connect
Projector (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad Hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 239 Because the wireless LAN’ s default connection setting is for NOTE Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode. If this occurs, you can change the wireless LAN’ s connection setting to Infrastructure mode to match the settings on the projector.
Page 240 If you close ConfigFree. Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature. To use this feature: Display the ConfigFree menu.
Page 241: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 242 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles.
Page 243: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 244 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 245 SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 246 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 247 cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 248 Glossary CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Page 249 disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Page 250 Glossary executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities.
Page 251 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 252 Glossary Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse. L1 (level one) cache —...
Page 253 MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Page 254 Glossary optical drive — A drive which reads plastic coated discs on which information is recorded digitally and uses a laser to read data, music, or videos. palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time.
Page 255 properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date. RAM (random access memory) — Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer.
Page 256 “greater than” sign) indicating where users are to enter commands. Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the right side of the computer. TFT display — See active-matrix display.
Page 257 Wi-Fi — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.
Page 258: Index
Index AC adaptor 46 AC power connecting adaptor 48 accessories memory 52 adding memory 52 adjusting recording quality 148 Alt keys 84 audio .wav files 147 audio features 147 backing up files 82 battery alarms 114 changing 117 charge indicator light 48 charge not lasting 179 charging 46 conserving power 114...
Page 259 129 Device Manager 176 checking properties 176 disabling a device 176 devices keyboard 66 mouse 66 disable/enable TOSHIBA Touch and Launch Index Disk Defragmenter 185 disk drive corrupted/damaged data files 185 missing files/trouble accessing a disk 184 running slow 185...
Page 260 Index warning resume failure 169 Error-checking 184 Ethernet LAN port 140 expansion memory slot 55 exploring the desktop 128 external monitor not working 183 mouse 66 external diskette drive connecting 69 external display, adjusting 66 FAT (File Allocation Table) 184 file extensions 92 file, backing up 82 files...
Page 261 function keys 85 hot keys 216 not working 169 overlay keys 86 troubleshooting 180 using 83 Windows special keys 85 keyboard, external 66 keyboard, full-size 84 lock computer, using 80 main battery removing 118 memory adding 52 problem solving 178 removing expansion slot cover 55 memory module inserting 56...
Page 262 183 checking device properties 176 computer hangs when PC Card inserted 190 computer will not power up 168 contacting Toshiba 206 corrupted/damaged data files 185 Device Manager 176 disabling a device 176 disk drive is slow 185...
Page 263 66 Toshiba registering computer 45 worldwide offices 208 TOSHIBA Assist 155 Toshiba online resources 104 TOSHIBA Touch and Launch 161 disable/enable 165 Toshiba utilities 154 traveling tips 127 troubleshooting DVD player general problems 196 external keyboard 181...
Page 264 Index video projector adjusting display 66 warranty limited warranty 37 Web 144 Web sites 207 Wi-Fi wireless networking 143 Windows Explorer 88 Windows Media Player 99 Windows Media Player icon 130 Windows operating system desktop Windows Start menu 88 Windows XP Help and Support 172 problem solving 170 wireless networking 143...

Toshiba L35-S1054 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: TOSHIBA Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba L35-S1054

Summary of Contents for Toshiba L35-S1054