Page 1 User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 241 in this guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 Certified Equipment NOTICE: The Industry Canada label identifies certified equipment.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 ETS 300 328 Technical requirements for radio equipment ETS 300 826 General EMC requirements for radio equipment. English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Page 11 Caution: Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 12 Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 13: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 14: Radio Approvals For Wireless Devices
Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only Radio approvals for wireless devices NOTE The following information is dependent on what type of wireless device is in...
Page 15 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 17 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 18 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 19: Bluetooth Wireless Technology Interoperability
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Page 20: Bluetooth Wireless Technology And Your Health
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 21: Regulatory Statements
community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization.
Page 22 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 23 Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications. In event that any interference is found, the use of such electric machinery shall be stopped immediately, and reusing of such products can be resumed until no interference occurs after improvement.
Page 24 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 25 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 26 ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wireless Capability Ethernet Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 27 MultiMediaCard is a trademark of Infineon Technologies AG. All other brand and product names are trademarks or registered trademarks of their respective companies. Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 28: Table Of Contents
Keeping yourself comfortable ...43 Precautions ...46 Important information on your computer’s Setting up your computer ...49 Setting up your software...49 Registering your computer with Toshiba ...50 Adding external devices ...51 Connecting to a power source ...52 Charging the main battery...55 cooling fan ...48...
Page 29 Using the computer for the first time ...56 Opening the display panel ...56 Your computer’s features and specifications ...57 Turning on the power ...57 Using the TouchPad™...58 Scrolling with the TouchPad™ ...59 Using the Scroll button ...59 Using the Control buttons ...59 Disabling or enabling the TouchPad ...60 Installing additional memory (optional) ...61 Removing a memory module...65...
Page 30 Connecting the modem to a phone line...104 Connecting your computer to a network ...105 Powering down the computer ...105 Using the Turn off computer or Shut down Using Hibernation Mode ...108 Using Standby Mode...110 Toshiba’s online resources ...113 keyboard ...85 ® special keys...87 command...106 ®...
Page 31 Chapter 3: Mobile Computing... 114 Toshiba’s energy-saver design...114 Running the computer on battery power ...115 Battery Notice ...115 Power management ...116 Using additional batteries ...117 Charging the batteries...117 Charging the main battery...118 Charging the RTC battery...118 Monitoring battery power ...120 Determining remaining battery power...120...
Page 32 Contents The World Wide Web ...142 Internet Service Providers...142 Connecting to the Internet ...142 Surfing the Internet...143 Internet features...143 Uploading and downloading files from Exploring audio features ...145 Playing an audio CD...145 Playing CDs using Auto-Run...146 Creating a CD or DVD ...147 Recording sounds...148 Using external speakers or headphones...150 Using the i.LINK...
Page 33 Remote Control for QosmioPlayer ...163 Removing QosmioPlayer ...170 Installing the QosmioPlayer Recovery media ...171 On systems with QosmioPlayer On systems with QosmioPlayer previously Connecting your modem to a telephone line...172 Connecting to a phone line ...173 Chapter 5: Getting to Know the Windows Media Center Edition...
Page 34 Watching a DVD...214 Stopping a DVD Movie...215 Playing a DVD movie already in your drive ...215 Changing the Media Center Settings ...216 Chapter 6: Toshiba Utilities... 224 Fn-esse Starting Fn-esse Using the keyboard or pointing device to Viewing existing key assignments...228 Changing or removing existing TOSHIBA Console ...229...
Page 35 Hotkey utility ...233 Toshiba Hardware Settings ...233 Toshiba Picture Enhancement Utility ...235 CD/DVD Drive Acoustic Silencer ...236 Enabling Hibernation...237 Setting passwords ...238 Using an instant password...238 Using a supervisor password...238 Setting a supervisor password...238 Deleting a supervisor password...240 Chapter 7: If Something Goes Wrong ... 241 Problems that are easy to fix ...241...
Page 36 Contents If you need further assistance...265 Before you call ...265 Contacting Toshiba ...266 Other Toshiba Internet Web sites ...267 Toshiba’s worldwide offices...267 Appendix A: Hot Keys... 269 Volume Mute ...269 Instant password security...270 Power usage profile ...270 Stand By mode ...271 Hibernation mode ...272...
Page 37: Introduction
Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you Qosmio™ E15 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any location.
Page 38: This Guide
Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 39: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 40: Other Icons Used
Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery media. ❖ For accessory information, visit Toshiba's Web site at accessories.toshiba.com. ❖ The Microsoft documentation, which explains the features of the operating system.
Page 41: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServ limited warranty programs. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.
Page 42: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.
Page 43: Keeping Yourself Comfortable
❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than the speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Page 44 Getting Started Selecting a place to work twisting your torso or neck and look at the screen without slouching. ❖ If you use an external monitor, the top of the screen should be no higher than eye level. ❖ If you use a paper holder, set it at the same height and distance as the screen.
Page 45 extra back support. Lower-back-support cushions are available at many office supply stores. ❖ Sit with your back straight so that your knees, hips, and elbows form approximately 90-degree angles when you work. Do not slump forward or lean back too far. Lighting Proper lighting can improve the readability of the display and reduce eyestrain.
Page 46: Precautions
Getting Started Precautions Using the computer keyboard incorrectly may result in discomfort and possible injury. If your hands, wrists, and/or arms bother you while typing, stop using the computer and rest. If the discomfort persists, consult a physician. Work habits The key to avoiding discomfort or injury from strain is to vary your activities.
Page 47 ❖ Avoid prolonged physical contact with the underside of the computer. If the computer is used for long periods, its case can become very warm. While the temperature may not feel too hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, for example), your skin might suffer low-heat injury.
Page 48: Important Information On Your Computer's Cooling Fan
Getting Started Precautions Information on disks is stored magnetically. Placing a magnet too close to a disk can erase important files. ❖ Scan all new files for viruses. This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus.
Page 49: Setting Up Your Computer
Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” on page 49 or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards.
Page 50: Registering Your Computer With Toshiba
A window displays, asking if you wish to register with Toshiba and Microsoft. Click Yes to register, or No to exit the process. If you click No, you may register with Toshiba by clicking the NOTE Register with Toshiba icon on the desktop.
Page 51: Adding External Devices
Adding external devices Before adding external devices, Toshiba recommends setting NOTE up your software. See Before starting to use your computer, you may also want to: ❖ Add more memory (see (optional)” on page ❖ Connect a mouse (see ❖...
Page 52: Connecting To A Power Source
Getting Started Connecting to a power source Connecting to a power source Your computer requires power to operate. Use the power cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s battery. Sample power cable and AC adapter Hold the power cable by its plug when you connect/disconnect it.
Page 53 Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter. To connect AC power to the computer: Connect the power cable to the AC adapter.
Page 54 Getting Started Connecting to a power source Plug the AC adapter into the DC-IN on the back of the computer. Sample connecting the AC adapter to the computer Connect the power cable to a live electrical outlet. Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable.
Page 55: Charging The Main Battery
remove the battery pack. See page 241 Charging the main battery To charge the main battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on.
Page 56: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel Sample opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily.
Page 57: Your Computer's Features And Specifications
Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 58: Using The Touchpad
Getting Started Using the TouchPad™ Sample turning on the power The preinstalled operating system loads automatically. Never turn off the computer while any drive is in use. Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger.
Page 59: Scrolling With The Touchpad
❖ To move it to the left side, slide your finger from right to left. Because the TouchPad is much smaller than the display NOTE screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction.
Page 60: Disabling Or Enabling The Touchpad
Getting Started Using the TouchPad™ mouse button. Check your program’s documentation to find whether it uses the right mouse button. Disabling or enabling the TouchPad The TouchPad is enabled by default. To change the enable/ disable TouchPad setting: Click Start, then click Control Panel. The Control Panel window appears.
Page 61: Installing Additional Memory (Optional)
Toshiba Web site at accessories.toshiba.com). There are two memory slots. Your system may have both slots occupied.
Page 62 Getting Started Installing additional memory (optional) You need a standard Phillips no.1 screwdriver for this procedure. To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. The computer has two memory module slots—Slot A and Slot B.
Page 63 Installing additional memory (optional) Remove the battery (see page 125). Using a standard Phillips no. 1 screwdriver, unscrew the captive screw that secures the memory module slot cover, then remove the memory module slot cover. Sample removing the memory module slot cover Place the memory module slot cover in a safe place so that you can retrieve it later.
Page 64 Getting Started Installing additional memory (optional) Gently press down on the memory module connector until the clips snap into place. Do not force the memory module into position. The memory module should be level when secured in place. Sample inserting the memory module into the slot The clips on either side of the memory module click to secure the memory module.
Page 65: Removing A Memory Module
If you are adding extra memory after setting up the computer, verify that the computer has recognized it correctly as described in Removing a memory module Complete steps (optional)’” to shut down the computer and open the memory module cover. Do not try to remove a memory module with the computer turned on.
Page 66 Getting Started Installing additional memory (optional) Sample removing the memory module Replace the memory module slot cover and fasten the screw. Turn the computer over and restart it. Checking total memory When you add or remove memory, you can check that the computer has recognized the change.
Page 67: Using An External Keyboard
Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB port supports any USB- compatible keyboard. Using a mouse You may want to use a mouse instead of the computer’s built- in TouchPad.
Page 68: Setting Up Your Printer
Getting Started Connecting a local printer Read the documentation that came with your printer. Follow NOTE the manufacturer’s instructions when connecting a local printer. You must supply the proper printer cable. If one did not come NOTE with your printer, you may purchase one from an electronics or computer store.
Page 69 TECHNICAL NOTE: If you have the manufacturer’s disc that came with your printer, you can use it to install the printer on your computer. The manufacturer’s disc may include additional drivers and fonts. To set up a printer with the Add Printer Wizard: Click Start and then Printers and Faxes.
Page 70 Getting Started Connecting a local printer Sample Add Printer Wizard dialog box Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows You can ignore the remainder of this section. See your printer manual for more information.
Page 71 The wizard prompts you to select your printer. From the list of manufacturers and printers, select your printer, then click Next. The Add Printer Wizard prompts you to enter a “friendly” printer name. Enter a name for your printer. HINT: If you are using more than one printer, make sure the name is descriptive enough to help you tell the difference.
Page 72: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. Sample optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the USB ports.
Page 73: Connecting External Display Devices
To connect a device to the S-video port, you will need to purchase an S-video cable. For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Getting Started...
Page 74: Dvd Player
Getting Started Connecting external display devices Using a poor-quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video. Connecting a digital or plasma television or VCR/ DVD player TECHNICAL NOTE: You must have digital TV service to watch digital TV on your computer.
Page 75 Connecting a standard television, projector, or VCR/ DVD player Video cables are not included with your computer. To connect NOTE a device to the S-video Out port, you will need to purchase an S-video cable. To connect a standard television, projector, or VCR/DVD player: Connect one end of the video cable to the external video device.
Page 76: Directing The Display Output When You Turn On The Computer
Getting Started Connecting external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen or to display anything on your computer screen. To do this: Connect the monitor’s video cable to the RGB (monitor) port on the back of the computer.
Page 77: Adjusting The Quality Of The External Display
Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel, and Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and click Apply or OK.
Page 78 Getting Started Connecting External AV Input Devices Connecting a Set-top box or standard TV antenna You can watch standard television by connecting a Set-top box or antenna to the Antenna In port on your computer. To do this: Connect the television Set-top box or antenna to the coaxial adapter cable.
Page 79: Turning Off The Computer
Connecting to the Composite In port The Composite In port provides another way to connect a VCR/DVD player or game console to your computer. To do this: Connect the external device’s video cable to the Composite In port on the back of the computer. Connect the device’s power cable to a live electrical outlet.
Page 80: Caring For Your Computer
To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. “Powering down the computer” on 105.
Page 81: Closing The Display Panel
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit Getting Started Caring for your computer “Enabling Hibernation”...
Page 82: Using A Computer Lock
Getting Started Caring for your computer Using a computer lock For your own peace of mind, you may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy Computer Lock Cable.
Page 83: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 84 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 85: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 86: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard programs assign separate functions to the right and left keys, or to the regular and numeric pad the full-sized keyboard. Using the these separate keys, as follows: ❖ Press the right side of the enhanced keyboard. ❖...
Page 87: Windows ® Special Keys
® Windows special keys Sample Windows Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse button Overlay keys Sample numeric and cursor control overlay The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Page 88: Using The Overlay To Type Numeric Data
Learning the Basics Using the keyboard Using the overlay to type numeric data To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 89: Starting A Program
To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options.
Page 90: Starting A Program From Windows Explorer
Learning the Basics Starting a program To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows view of your computer’s contents as a hierarchy or “tree.”...
Page 91: Starting A Program From The Run Dialog Box
To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from the Run dialog box This example uses the Run command to start WordPad: Click Start, then click Run. The Run dialog box appears. Sample Run dialog box In the Run dialog box: ❖...
Page 92: Saving Your Work
Learning the Basics Saving your work Saving your work Before you turn off the computer, save your work to the hard disk drive. Always save your data even when you are using the Stand by. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low, see Many programs offer a feature that saves documents at...
Page 93: File Names
Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 94: Printing Your Work
Learning the Basics Printing your work Printing your work Verify that the Windows your printer as described in page TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).
Page 95: Backing Up Your Files
Backing up your files Backing up your files means copying individual files to media, such as CDs, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a writable CD-ROM drive or DVD- ROM multi-function drive, you may back up file to a writable disc as follows: To back up to a CD or other media, insert the media into...
Page 96: Using The Dvd-Rom Or Multi-Function Drive
Learning the Basics Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform.
Page 97: Drive Components And Control Buttons
Using the DVD-ROM or multi-function drive Drive components and control buttons The DVD-ROM or multi-function drive is located on the right side of the computer. The Media control buttons are located above the keyboard and can be accessed when the display panel open.
Page 98: Media Control Buttons
Learning the Basics Using the DVD-ROM or multi-function drive Media control buttons The control buttons above the computer keyboard let you play audio CDs when the computer is on. You can also use them to play CDs and DVDs when the computer is off using the QosmioPlayer application.
Page 99: Inserting A Disc
Using the DVD-ROM or multi-function drive The Previous track button returns to the preceding track on the disc. The Next track button skips to the following track on the disc. The Record button records television programs which are currently being viewed. The Brightness button adjusts the screen brightness.
Page 100 Learning the Basics Using the DVD-ROM or multi-function drive Grasp the tray and pull it fully open. Sample drive tray fully extended Hold the disc by its edges and check that it is clean and free of dust. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge.
Page 101 If you insert the disc incorrectly, it may jam the drive. If this happens, contact your Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 102: Viewing The Contents Of A Cd Or Dvd
Learning the Basics Using the DVD-ROM or multi-function drive Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files.
Page 103: Removing A Disc With The Computer Off
Using the DVD-ROM or multi-function drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 104: Setting Up For Communications
To stay current on the most recent software and hardware NOTE options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com. Connecting the modem to a phone line Your computer comes with a built-in modem. To use the modem, you must connect it to a standard voice-grade RJ-11 telephone line.
Page 105: Connecting Your Computer To A Network
Connecting your computer to a network You can connect your computer to a network remotely, using the built-in modem and a dial-up connection. For specific information about connecting to the local area network (LAN) or wide area network (WAN), consult your network administrator.
Page 106: Using The Turn Off Computer Or Shut Down Command
Learning the Basics Powering down the computer the computer to turn on and send or receive the files while you are asleep. TECHNICAL NOTES: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off.
Page 107 To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click on the Setup Action tab. Select the following from the drop-down lists. ❖...
Page 108: Using Hibernation Mode
Learning the Basics Powering down the computer Sample system power mode settings For more information about the Power Saver utility, see NOTE “Power Saver” on page Starting again after Shut down To start the computer up again, press the power button until the on/off light changes to green.
Page 109 Configuring your computer for Hibernation Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernate so that the computer will go into Hibernation mode when you press the power button.
Page 110: Using Standby Mode
Learning the Basics Powering down the computer The computer is now set to automatically enter into Hibernation when your option settings occur. For more information about the Power Saver utility, see NOTE “Power Saver” on page Once the computer is configured, place the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options selected.
Page 111 ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If you power down using the Stand by and the battery discharges fully, your information will be lost. Be sure to save your work first.
Page 112 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Stand by for the options you want. ❖...
Page 113: Toshiba's Online Resources
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 114: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods of time...
Page 115: Running The Computer On Battery Power
Toshiba Web site at accessories.toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.
Page 116: Power Management
Mobile Computing Running the computer on battery power For optimum DVD performance, Toshiba recommends that you NOTE play DVDs while running on AC power rather than on battery power. The QosmioPlayer is not a Windows-based application. Battery life is less than when using similar applications in the Windows operating system.
Page 117: Using Additional Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Mobile Computing...
Page 118: Charging The Main Battery
Mobile Computing Charging the batteries Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adaptor to run applications, features, and devices, the recharging of the battery can not occur.
Page 119 The RTC battery may have become completely discharged while your computer was shipped, resulting in the following error message during startup: BAD RTC BATTERY BAD CHECKSUM (CMOS) CHECK SYSTEM The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer.
Page 120: Monitoring Battery Power
Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge.
Page 121 Sample Toshiba Power Saver Properties Dialog Box The remaining battery charge is indicated on the top-left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged.
Page 122: What To Do When The Battery Runs Low
To change the default alarm settings: Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select the Alarm settings in the Setup Alarm section. ®...
Page 123: Conserving Battery Power
By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery. Toshiba has combined these options into preset power usage modes or profiles. Mobile Computing...
Page 124: Power Profiles In Windows Xp
Toshiba Power Saver instead. Open the Start menu, click Control Panel, then Performance and Maintenance. Click on the Toshiba Power Saver icon. Select an appropriate profile for your work environment, or create your own custom profile. For more information, see Using a hot key to set the power profile You may use a hot key to set the power profile.
Page 125: Changing The Main Battery
While continuing to press desired power profile. The power profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Release the The pop-up window disappears. You are now in the selected mode. For more information on setting the battery power profile, see “Power Saver”...
Page 126: Removing The Battery From The Computer
Mobile Computing Changing the main battery Removing the battery from the computer Save your work. Shut down and turn off the computer. Remove all cables connected to the computer. Turn the computer over. If the battery lock is in the locked position, slide it toward the unlocked position.
Page 127: Inserting The Battery Into The Computer
While holding the battery release latch, pull the discharged battery out from the back of the computer. Sample removing the discharged battery pack If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Inserting the battery into the computer Assuming you just removed the battery pack (see...
Page 128: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through to Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 129: Maximizing Battery Life
❖ When you install the battery pack, you should hear a click when it is seated properly. ❖ Do not expose the battery pack to fire. The battery pack could explode. Maximizing battery life To maximize the life of your battery pack: ❖...
Page 130: Disposing Of Used Batteries
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state, and local laws, it may be illegal to dispose of old batteries by placing them in the trash.
Page 131: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 132: Chapter 4: Exploring Your Options
Chapter 4 Exploring Your Options In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 133: Finding Your Way Around The Desktop
Exploring Your Options Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Taskbar Start button System tray ® Sample Windows XP Media Center Edition operating system desktop Icons An icon represents a folder, file, or program that can be...
Page 134 Exploring Your Options Exploring the desktop The icons initially displayed on your system desktop include: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin.
Page 135: System Tray
Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 136: Setting Up For Communications
Exploring Your Options Setting up for communications Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A modem (one comes with your Qosmio E15 Series computer) ❖...
Page 137: Connecting The Modem To A Telephone Line
Make a note of the COM port number. To verify that the modem is set up properly, select the modem you wish to check, and then click Properties to bring up the dialog box with information specific to that modem. Click the Diagnostics tab, and then click Query Modem.
Page 138 Windows to disable the LAN port. TECHNICAL NOTE: You can also use ConfigFree to reconfigure Windows to disable the LAN port. For procedures, “Using ConfigFree™ with your Toshiba Computer” on page To disable the LAN port: Click Start, click Control Panel, then Performance and Maintenance.
Page 139 Click the System icon, then click the Hardware tab, and then click the Device Manager button. Select Intel Network adapters. Click Actions. Select the Properties icon. Select the Do not use this device (disable) option from the Device usage drop-down. Click OK.
Page 140 Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. is a technology that expands wireless ®...
Page 141: An Overview Of Using The Internet
For systems equipped with Wi-Fi, flip the wireless on/off switch to the On position. You can use Wi-Fi NOTE To enable a wireless device, use the “Enabling a wireless device” on page 274 information). An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features.
Page 142: The World Wide Web
Exploring Your Options An overview of using the Internet The World Wide Web The World Wide Web (or “Web”) is a subset of the Internet— a collection of interlinked documents (located on computers connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP).
Page 143: Surfing The Internet
Once you have established an ISP account, you can connect to the Internet. Connect your computer’s modem to a telephone line. For more information on connecting a modem, see QosmioPlayer” on page Start your Web browser. Have your modem dial the ISP’s telephone number, and establish a connection with the ISP’s computer.
Page 144: Uploading And Downloading Files From The Internet
Exploring Your Options An overview of using the Internet If you have an account with an ISP, you can probably set up an email address at the same time you sign up for the service. ❖ Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on-one or in groups, by typing messages which are instantly viewed by others on their computer screens.
Page 145: Exploring Audio Features
Exploring audio features You can use your computer to record sounds using an external microphone or the computer’s built-in microphone which is located on the front of the computer. You can play .wav sound files or audio CDs using the built-in speakers, headphones, or external speakers.
Page 146: Playing Cds Using Auto-Run
Exploring Your Options Exploring audio features Sample Windows Media The CD Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button on the CD Player control panel. ❖...
Page 147: Creating A Cd Or Dvd
Click the DVD-ROM/multi-function drive icon. The drive runs the CD. If your disk does not run using this method, try using an application that is associated with the media on the disk. For example, if it is a music CD, open Windows Media and point it to play the CD.
Page 148: Recording Sounds
Exploring Your Options Exploring audio features Recording sounds You may record sounds as .wav files by connecting an external microphone or other sound source to the microphone jack. You may also record sounds using the computer’s built- in microphone located on the front of the computer. DEFINITION: A .wav (pronounced “wave”) file is a Windows format for storing sound.
Page 149: Adjusting Recording Quality
Positioning Sample Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform. Sound Recorder can only record 60 seconds at a time. NOTE To hear what you just recorded, click the Play button.
Page 150: Using External Speakers Or Headphones
Exploring Your Options Exploring audio features In the Audio Properties dialog box, adjust the Recording Volume, Preferred device, and Preferred quality. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 151: Using The I.link ® Port
Using the i.LINK The i.LINK extremely fast data transfer rate (up to 400 mega bits per second [Mbps]). In addition to high speed, the i.LINK isochronous data—the delivery of data at a guaranteed rate. This makes it ideal for devices that transfer high levels of data in real-time, such as video devices.
Page 152: Removing A Pc Card
Exploring Your Options Inserting and removing PC Cards You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove. Locate the PC Card slot on the left side of the computer.
Page 153: Setting Up A Pc Card For Your Computer
Sample ejecting a PC card The PC Card ejects slightly from the slot. Grasp the edges of the PC Card and slide it out of the slot. Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer.
Page 154: Inserting Memory Stick Or Memory Stick Pro Media
Exploring Your Options Using the Bridge Media slot Inserting Memory Stick or Memory Stick PRO media Turn the Memory Stick so that the notched corner faces the back of the computer and the arrow is face up. Push the media into the slot until it locks in place. Sample inserting Memory Stick or Memory Stick PRO media Do not remove Memory Stick media while data is being written or read.
Page 155: Inserting An Sd™ Card
™ Inserting an SD Turn the card so that the contacts (metal areas) are face down. Push the card into the slot until it locks in place. Sample inserting an SD Card Do not touch the SD expose the storage area to static electricity, which can destroy data.
Page 156: Inserting An Xd-Picture Card
Exploring Your Options Using the Bridge Media slot Inserting an xD-Picture Card Turn the card so that the contacts (metal areas) are face down. Push the card into the slot until it locks in place. Sample inserting an xD-Picture Card Do not touch the xD-Picture could expose the storage area to static electricity, which can destroy data.
Page 157: Using Qosmioplayer
Using QosmioPlayer Your computer includes the QosmioPlayer software, allowing you to watch television (if the computer is connected to a television or video source), play audio CDs, or watch DVD- video without having to launch the operating system. When using QosmioPlayer, the MCE Remote Control device NOTE will not function.
Page 158: Using The Media Control Buttons
Exploring Your Options Using QosmioPlayer Using the Media Control Buttons The Media Control Buttons above the computer keyboard allow you to reverse to the previous song, skip to the next song, play or pause the CD, or stop the CD. Play/ Pause Sample CD Player Media Control buttons...
Page 159: Playing A Dvd
Press this key to hide the audio CD option guide. Press again to re-display the guide. CTRL + S Press the CTRL+S keys to shuffle the CD currently playing. CTRL+UP/ Press the CTRL+UP Arrow keys to increase the volume, press DOWN Arrow the CTRL+DOWN Arrow keys to decrease the volume.
Page 160 Exploring Your Options Using QosmioPlayer When playing a DVD, you have the following options: Press this key once to display the basic DVD guide options. Press the key twice to display the full DVD guide options. Press the key again to hide the DVD guide options. Press a number on your keyboard to play a specific DVD chapter.
Page 161: Watching Television
The drive will allow you to change regions four times. On the fourth change, the region will be “locked in.” That is, the drive will only play DVDs from that last region. Note that changing from region 1 to region 2 and back to region 1 is counted as two changes.
Page 162: Connecting An External Device
Exploring Your Options Using QosmioPlayer When viewing television, programs, you have the following options: Press a number on your keyboard to watch a specific channel. PAGE UP/ Press the PAGE UP key to scroll backward through channels, DOWN press the PAGE DOWN key to scroll forward through channels. CTRL+UP/ Press the CTRL+UP Arrow keys to increase the volume, press DOWN Arrow...
Page 163: Remote Control For Qosmioplayer
Sample pressing the Monitor button Press the Monitor button to close and exit the external device environment and return to Windows or the QosmioPlayer. Remote Control for QosmioPlayer You can use your QosmioPlayer remote control to play CDs, DVDs, and videos; to view pictures; and to watch television programs through QosmioPlayer.
Page 164 Exploring Your Options Using QosmioPlayer QosmioPlayer Remote Control Buttons Overview Power Input Full Screen Numbers Select Arrows Set Up Channel Selector Rewind Previous Display Angle The QosmioPlayer Remote Control Media Brightness DVD Menu OK Button Back Volume Control Mute Forward Play/Pause Next Stop...
Page 165 Exploring Your Options Using QosmioPlayer The remote control has the following buttons/functions: Power — Turns the computer on and starts Windows if the computer is off or in Hibernation mode. If the computer is running Windows or QosmioPlayer, pressing Power turns off the computer.
Page 166 Exploring Your Options Using QosmioPlayer Mute — Mutes the sound. Press again to enable sound. Rewind — Moves the media (video, DVD, music, and so on) backwards. Previous — Moves the media backward. Display — Displays the current title and/or chapter of the DVD.
Page 167 The other direct access buttons open specific windows within QosmioPlayer, such as the Setup menu. ❖ Audio and Video — The audio and video buttons control sound and channel selection, display details, and allow you to enter text. Direct Access Buttons The direct access buttons place QosmioPlayer in TV or Media mode.
Page 168 Exploring Your Options Using QosmioPlayer ❖ Moves pictures forward to the next picture. ❖ Moves a video forward. ❖ Moves a TV program (that has been paused or stopped) forward to the current moment in live TV, and then begins playing. Use Rewind to rewind selected video or picture media.
Page 169 Using the QosmioPlayer Remote Control To begin using your remote control: Point the remote control at the remote sensor. The remote sensor is located on the front of your computer. Make sure there is nothing blocking the path between your remote control and the remote sensor.
Page 170: Removing Qosmioplayer
Exploring Your Options Removing QosmioPlayer Removing QosmioPlayer You can remove QosmioPlayer from your computer and reclaim approximately 100 MB of hard disk drive space. Click Start, then click Control Panel. Click Add or Remove Programs. Click QosmioPlayer, then click the Change/Remove button.
Page 171: Installing The Qosmioplayer Recovery Media
Installing the QosmioPlayer Recovery media Installing the QosmioPlayer Recovery media You can install the QosmioPlayer program in one of two ways (depending upon if QosmioPlayer was previously removed from your computer). On systems with QosmioPlayer currently installed To recover or repair QosmioPlayer on a computer that still has the application installed: Insert the QosmioPlayer Recovery media into the drive, close the drive tray, and restart your computer from the CD.
Page 172: Connecting Your Modem To A Telephone Line
(LAN), or a larger corporate wide area network (WAN). For specific information about connecting to a LAN or WAN, consult your network administrator. ❖ Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com.
Page 173: Connecting To A Phone Line
Connecting your modem to a telephone line Connecting to a phone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 174 Exploring Your Options Connecting your modem to a telephone line Now you are ready to send a fax or use the modem to connect to an online service or the Internet. For more information on using a modem, see communications” on page “Setting up for 136.
Page 175: Chapter 5: Getting To Know The Windows Xp Media Center Edition
Chapter 5 Getting to Know the Windows Center Edition This section introduces you to the Windows Media Center Edition, a complete multimedia center where you can play your entire library of audio, video, and picture media on your computer, using either your computer’s keyboard, mouse, or the remote control.
Page 176: Chapter 5: Getting To Know The Windows ® Xp Media Center Edition
Getting to Know the Windows ® XP Media Center Edition Media Center Setup Media Center Setup This section shows you how to set up your computer to use the Media Center. There are many different methods you can use to connect your television and computer which are covered in the following sections.
Page 177: Connecting The Tv Signal Source When You Have An Existing Setup
Getting to Know the Windows ® XP Media Center Edition Some stations may not come in clearly if the signal is not NOTE strong enough. If you do not have a Set- top box, you may need to purchase a signal amplifier which may help boost and improve the cable signal.
Page 178 Getting to Know the Windows ® XP Media Center Edition Media Center Setup Connect two coaxial cables to the splitter outputs. Connect one of the coaxial cables to the VCR/DVD player input, and the other end to the coaxial port on the back of the computer.
Page 179: Connecting The External Remote Sensor
Getting to Know the Windows ® XP Media Center Edition Existing setup Wall Cable Coaxial cable Set-top box/ Set-top box/ satellite In Set-top box/ Set-top box/ satellite Out Coaxial cable VCR/DVD Player In VCR/DVD Player Out Coaxial cable TV In Sample wall-to-VCR/DVD player-to-TV setup Connecting the External Remote Sensor The external IR remote sensor is a small device that connects...
Page 180: Starting The Media Center
Getting to Know the Windows ® XP Media Center Edition Starting the Media Center Sample IR receiver with cables attached Position the end of the IR receiver cable over the remote IR receiver window on your cable TV Set-top box or VCR/DVD player.
Page 181 Getting to Know the Windows ® XP Media Center Edition Starting the Media Center The first time you open Media Center, a setup wizard displays. NOTE From here, you can test your remote control and configure your Internet connection, TV signal, and Television Program Guide.
Page 182 Getting to Know the Windows ® XP Media Center Edition Starting the Media Center To complete the Media Center Setup, follow the wizard on- screen prompts. When the wizard finishes, the Media Center main window displays. You can run Media Center side by side with other Windows NOTE software programs.
Page 183 Getting to Know the Windows ® XP Media Center Edition ❖ Watch a DVD movie ❖ Change your Media Center Settings When enjoying the Media Center, use the icons on the Title Bar to return to the Media Center main screen, go back to the previous screen, or to display the Media Center’s online help.
Page 184: Remote Control For Media Center
Getting to Know the Windows ® XP Media Center Edition Starting the Media Center Navigating Media Center In the Media Center windows, a selected item, such as a folder, file, or menu item is outlined with a green border. To select items, use the arrow buttons on the remote control, and then the OK button to enter your selection.
Page 185 Getting to Know the Windows ® XP Media Center Edition Remote Control Buttons Overview Stand By Record Replay Pause Back Live TV MY Music My Video Volume DVD Menu Clear The Remote Control The remote control has the following buttons/functions: Stand By —...
Page 186 Getting to Know the Windows ® XP Media Center Edition Starting the Media Center Play — Plays the selected media. FWD (Fast forward) — Moves media forward. Replay — Moves media backward (seven seconds for videos and live TV, one music track or one DVD chapter at a time). Pause —...
Page 187 Getting to Know the Windows ® XP Media Center Edition Channel/Page up (+) and down (-) — Changes the TV channel or moves a page up and down, depending on the available options. DVD Menu — Opens the main menu on a DVD movie, if available.
Page 188 Getting to Know the Windows ® XP Media Center Edition Starting the Media Center Direct Access Buttons The direct access buttons open the main Media Center windows. ❖ TV opens the MY TV window where you can watch and record TV and access other MY TV features. ❖...
Page 189 Getting to Know the Windows ® XP Media Center Edition ❖ Moves a video forward. ❖ Moves a TV program (that has been paused or stopped) forward to the current moment in live TV, and then begins playing. Use REW to rewind selected video or picture media. Press REW again to increase the rewinding speed.
Page 190: Watching Television Programs
Getting to Know the Windows ® XP Media Center Edition Watching Television Programs ❖ For music, Replay moves to the previous track. ❖ For DVDs, Replay moves to the previous chapter. ❖ For videos and live TV and videos, Replay moves back 7 seconds.
Page 191 Getting to Know the Windows ® XP Media Center Edition ❖ Pause, stop, rewind, and fast forward live TV, similar to the way you would control a DVD from a DVD player. ❖ Record a single TV show or an entire series. MY TV will manage the recordings for you and give advanced warning if there are any recording conflicts.
Page 192: Selecting A Program From The Tv Guide
Getting to Know the Windows ® XP Media Center Edition Watching Television Programs The last channel selected or the first channel available begins playing next to the MY TV menu. Select a channel by using the Channel/Page (+ or -) buttons or by using the numeric buttons on the remote control.
Page 193: Watching A Recorded Tv Program
Getting to Know the Windows ® XP Media Center Edition ❖ The number of channels and calendar days of TV listings depends on your television service provider. ❖ The TV Guide does not display past TV listings. Sample TV Guide screen ❖...
Page 194: Searching For A Tv Program
Getting to Know the Windows ® XP Media Center Edition Watching Television Programs program or series of programs and check for any recording errors. ❖ To watch a previously recorded TV program, on the MY TV screen, click Recorded TV. On the remote control, click Start, and then MY TV, and then select Recorded ❖...
Page 195: Recording Tv
Getting to Know the Windows ® XP Media Center Edition appear in a program title or program description, and then press OK on the remote control. Use the arrow buttons to scroll through the search results, select a show, and then press OK. If multiple times for the show are displayed, select a time and press OK.
Page 196: Recording Tv Tips
Getting to Know the Windows ® XP Media Center Edition Recording TV If a show is currently being recorded, the Record icon also appears in the taskbar on the desktop. If you move your mouse over the icon, the Media Center displays which show is currently being recorded.
Page 197: Recording From The Guide
Getting to Know the Windows ® XP Media Center Edition If you turn off (shut down) your computer, the Media Center NOTE will not record a scheduled program. Your computer must be turned on or in Stand By mode to record a TV program. The computer will not automatically go into Stand By mode if the Media Center is open.
Page 198: Recording From Search
Getting to Know the Windows ® XP Media Center Edition Recording TV Recording from Search To record a current or future show or series using Search: Press the Start button on the remote control, select MY TV, and then select Search. Select Title, Keyword, or Categories.
Page 199: Changing Your Settings
Getting to Know the Windows ® XP Media Center Edition Enter the channel number using the numeric buttons on the remote control. Under the Create a custom recording with area, select Channel and time. Use the arrow buttons on the remote and +/- buttons on the screen to bring the selections into focus.
Page 200: Changing Recording Priorities
Getting to Know the Windows ® XP Media Center Edition Recording TV Sample TV Settings screen This window allows you to change several settings that control how Media Center plays and records TV programs, as well as how it plays DVDs. In particular, you can change settings for: ❖...
Page 201: Listening To Music
Getting to Know the Windows ® XP Media Center Edition Press the Start button on the remote, and then select MY TV. Select Recorded TV. Select Scheduled. Select Series. Select Change priorities. Use the up or down arrow on the screen to move a scheduled series up or down in the list of series priorities.
Page 202: Creating Your Music Library Using Windows Media Player
Getting to Know the Windows ® XP Media Center Edition Listening to Music Sample My Music screen Creating Your Music Library Using Windows Media Player Each time you add music files outside of Windows Media Player, you must use the Tools menu to add music files to your Windows Media Player Library for Media Center to find them.
Page 203: Media Player Library
Getting to Know the Windows ® XP Media Center Edition Click the Media Library tab to see where your new audio files have been placed. You can rename files by selecting the file and typing a new name or genre over the old one.
Page 204: Playing Digital Music Files
Getting to Know the Windows ® XP Media Center Edition Listening to Music Select Search to search all drives or select Browse to search through a specific drive. Select the desired drive and then click OK. Windows Media Player searches the selected drives for all supported audio files and adds them to the Media Library.
Page 205: Finding Music Files In My Music
Getting to Know the Windows ® XP Media Center Edition Press the Start button on the remote control. Insert a CD into the CD drive — the CD plays automatically in Media Center. If you have other media such as live TV already playing when you insert the CD, Media Center asks you if you want to play the CD.
Page 206: Playing A Song
Getting to Know the Windows ® XP Media Center Edition Listening to Music Use the arrow keys to select a music file, and then press the Play button on the remote control to begin playing that music file. If you back up music files from a CD using Windows Media NOTE Player 9, you must log the files into the Media Player’s play list before you can play them using the Media Center.
Page 207: Finding And Playing An Album
Getting to Know the Windows ® XP Media Center Edition Use the arrow buttons to select Shuffle, and then press OK on the remote control. All songs in that genre are randomly played. Finding and Playing an Album In the Media Center Start menu, select My Music, and then select Albums.
Page 208: Creating A Playlist
Getting to Know the Windows ® XP Media Center Edition Listening to Music Creating a Playlist A playlist is a customized list of digital music files. Using playlists, you can group various digital music files together and determine the order in which you want the files to play. You can create a playlist that includes several tracks from various CDs or even a playlist that contains background music for a slide show.
Page 209: Displaying Your Pictures
Getting to Know the Windows ® XP Media Center Edition Displaying Your Pictures In My Pictures, you can: ❖ View pictures individually or as a slide show. ❖ Change transition time and display order of the pictures in your slide show. ❖...
Page 210: Viewing A Slide Show
Getting to Know the Windows ® XP Media Center Edition Displaying Your Pictures Your pictures are displayed just as you organized them in the My Pictures folder in Windows Explorer. Use the arrow buttons on the remote control to move through your picture files and folder files and select a picture.
Page 211: Watching Your Digital Movies
Getting to Know the Windows ® XP Media Center Edition Watching Your Digital Movies The My Videos window in the Media Center makes it easy to play home video files you created or video files you downloaded from the Internet. In My Videos you can: ❖...
Page 212: Organizing Your Videos
Getting to Know the Windows ® XP Media Center Edition Watching Your Digital Movies Organizing Your Videos When you attach a digital video camera to your PC, Windows asks you how you want to capture your video. You can choose from various software programs to capture and then edit your video file.
Page 213: Playing A Video In Full Screen Mode
Getting to Know the Windows ® XP Media Center Edition Use the arrow buttons on the remote control to move through and select your video or video folder. Press the OK button on the remote control. The selected video plays in full screen mode, or the folder opens displaying a list of video files.
Page 214: Watching A Dvd
Getting to Know the Windows ® XP Media Center Edition Watching a DVD Watching a DVD Watching DVDs in the Media Center allows you to control the playback with your remote control. If you select to play your DVD in another program, the use of some of the remote control buttons is not supported.
Page 215: Stopping A Dvd Movie
Getting to Know the Windows ® XP Media Center Edition Stopping a DVD Movie Press the Stop button on the remote control to stop the movie. Use the arrow buttons on the remote control to select an item on the Stopped menu, and then press OK. ❖...
Page 216: Changing The Media Center Settings
Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings Changing the Media Center Settings In the Media Center Settings window, you can change settings for watching television, for viewing your pictures and slide shows, and for controlling sound and the display of all the Media Center windows.
Page 217 Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings User Controlled Settings Some settings can be selected by each person using the PC. These settings are: ❖ Sounds, Appearance, and Audio sets sound and display settings.
Page 218 Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings ❖ Select Parental Control to set passwords, movie ratings, and other controls. ❖ Select Set up Internet connection to open the Internet Connection wizard. This allows you to set up your connection.
Page 219 Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings To change the TV/DVD settings, use the arrow buttons to select an option, and then press OK on the remote control. Select OK in the window and then press OK on the remote control again to enter the changes.
Page 220 Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings Change TV Guide Settings In the Guide Settings, you can select which channels to display and you can manually update your Guide from the Internet. TV Guide settings are the same for each user and can be changed only by the administrator of the computer.
Page 221 Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings Changing Parental Controls for TV Viewing Only the administrator of the computer can change the Parental Control setting. This feature may not be available on your PC.
Page 222 Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings In the DVD Settings window, select DVD, and then select Language. Use the arrow buttons to select the + or - buttons. Press the OK button on the remote control to scroll through the languages available.
Page 223 Getting to Know the Windows ® XP Media Center Edition Changing the Media Center Settings After you make your changes, press the Back button to return to the main Settings menu. Changing Picture Settings Each user can set his or her own picture settings. In the Media Center Start menu, select Settings.
Page 224: Chapter 6: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ ® Fn-esse ❖...
Page 225: Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse window Toshiba Utilities ®...
Page 226 Toshiba Utilities Fn-esse The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are light gray.
Page 227: Using The Keyboard Or Pointing Device To Assign Keys
Select Direct... to display the Add/Edit Command dialog box. Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click Browse to specify this information. Click OK. Toshiba Utilities ® Fn-esse key, then press plus...
Page 228: Viewing Existing Key Assignments
Toshiba Utilities Fn-esse Making a popup assignment Select Popup... to display the Application Explorer dialog box. Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs and documents in the folder.
Page 229: Toshiba Console
❖ To remove the key assignment, click Clear. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs.
Page 230: Customizing Your Computer
The Power Saver feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Saver through the TOSHIBA Console, double-click the Power Saver icon. ®...
Page 231 You can either use one of the preset modes or create and use your own customized profile. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change become effective when you click either OK or Apply.
Page 232: Mouse Utility
Keep in mind however, that by default, these actions will apply to all profiles. Mouse utility The Mouse utility allows you to change your TouchPad or mouse settings. To access the Mouse utility through the TOSHIBA Console, double-click the Mouse icon.
Page 233: Hotkey Utility
Standby ] and Hibernation [ Fn+F3 To activate: Click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Toshiba Hotkey window appears. Sample Toshiba Hotkey utility window Select the desired option.
Page 234 Toshiba Utilities TOSHIBA Console Sample TOSHIBA HWSetup window The tabs represent various dialog boxes. They are: ❖ General—Allows you to view current BIOS, hard disk drive, and memory settings ❖ Display—Allows you to change various default settings for the built-in LCD display ❖...
Page 235: Toshiba Picture Enhancement Utility
Toshiba Utilities TOSHIBA Console Toshiba Picture Enhancement Utility The Toshiba Picture Enhancement utility allows you to adjust your computer screen to maximize the ambient surrounding light. To access the Toshiba Picture Enhancement Utility through the TOSHIBA Console, double-click the Picture Enhancement icon.
Page 236: Cd/Dvd Drive Acoustic Silencer
Toshiba Utilities TOSHIBA Console CD/DVD Drive Acoustic Silencer Sample CD/DVD Drive Acoustic Silencer screen This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable.
Page 237: Enabling Hibernation
Click Set Normal Mode to run the drive at normal speed, for transferring data. Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You can enable hibernation through this utility.
Page 238: Setting Passwords
Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily ❖...
Page 239 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears. On the left side, select Security.
Page 240: Deleting A Supervisor Password
Click Start, then click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears.
Page 241: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 242 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 243: Problems When You Turn On The Computer
Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adapter and power cable properly or installed a charged battery.
Page 244: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows The computer displays the message. The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 245: Using Startup Options To Fix Problems
The Windows Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 246: Internet Problems
If Something Goes Wrong The Windows See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 247: Resolving A Hardware Conflict
The Help and Support window appears. Then do one or both of the following: ❖ In the search field, type the topic of the problem with which you need help and follow the on-screen instructions. ❖ Click a problem about which you would like help from the listings and follow the on-screen instructions.
Page 248: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work.
Page 249: Fixing A Problem With Device Manager
❖ Disable another system component and use its resources for the new device, see Manager” on page ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
Page 250 If Something Goes Wrong Resolving a hardware conflict Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.
Page 251: Memory Problems
Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
Page 252 If Something Goes Wrong Resolving a hardware conflict The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 253: Keyboard Problems
that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts. Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
Page 254 If Something Goes Wrong Resolving a hardware conflict . If no password is registered, press Enter reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, hold the key and press pops up.
Page 255 For more information, see Windows A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 256: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them.
Page 257 Your hard disk seems very slow. If you have been using your computer for some time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, then click All Programs, point to Accessories and System Tools, and click Disk Defragmenter.
Page 258: Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict The drive cannot read a diskette. Try another diskette. If you can access the second diskette, the first diskette (not the drive) is probably causing the problem. Run Error-checking on the faulty diskette (for instructions, see DVD-ROM or multi-function drive problems You cannot access a disc in the drive.
Page 259: Sound System Problems
Sound system problems You do not hear any sound from the computer. Adjust the volume control. If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers.
Page 260 If Something Goes Wrong Resolving a hardware conflict Other cards must be set up before you can use them. Use the ® Windows XP PC Card (PCMCIA) Wizard to set up the card. Refer to your Microsoft information, or refer to the documentation that came with the PC Card.
Page 261 The System Properties dialog box appears. Click the Hardware tab. Click the Device Manager button. Double-click the PCMCIA adapter. Double-click the appropriate PC Card. The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status.
Page 262: Printer Problems
If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
Page 263: Modem Problems
The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will print.
Page 264: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 265: If You Need Further Assistance
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. If Something Goes Wrong...
Page 266: Contacting Toshiba
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 267: Other Toshiba Internet Web Sites
Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia France Toshiba Systèmes (France) S.A. 7, Rue Ampère; B. P. 131 92800 Puteaux Cédex...
Page 268 Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec.
Page 269: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 270: Instant Password Security
The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Sample power usage modes The properties of each mode are set in the Toshiba Power Saver utility. For more information, see Computing” on page 114.
Page 271: Stand By Mode
Stand By mode This hot key places the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby Mode”...
Page 272: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default), a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display.
Page 273: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. ❖...
Page 274: Enabling A Wireless Device
Hot Keys Enabling a wireless device Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi or Bluetooth The wireless modes are: Bluetooth Bluetooth Wi-Fi enabled—This enables only the Wi-Fi module. All devices enabled—This enables both the Bluetooth All devices disabled—This disables both the...
Page 275: Disabling Or Enabling The Touchpad
Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see TouchPad” on page Sample disable and enable TouchPad windows Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off.
Page 276: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 277: Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 278: Getting Started
Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the Toshiba Console button (if applicable to your system) to open the Toshiba Console, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.”...
Page 279: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer Sample ConfigFree Launcher ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 280 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address. A wireless network device also shows information such as the network SSID and the device’s Wired Equivalent Privacy (WEP) key...
Page 281 Using ConfigFree™ with your Toshiba Computer If a problem, or potential problem, is detected, a triangle containing an exclamation point appears in the Connectivity Doctor screen and an orange frame describes the relevant location. You can then view a possible cause and solution for the problem by clicking the exclamation point.
Page 282: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN devices and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map.
Page 283 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices The following screen shows an example of Bluetooth devices that are detected. As wirh the Wi-Fi screen, moving the mouse pointer over a device icon displays information about the device.
Page 284: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click your own computer at the center of the map. Configured devices are automatically connected. Devices not yet configured launch the Add New Connection Wizard, where you can configure and connect to the device.
Page 285 Using ConfigFree™ with your Toshiba Computer ❖ Personal firewall settings for Internet connections. ❖ Dial-up connection settings for the default connection. ❖ File and printer sharing settings. ❖ Printer settings for the default printer. To create a profile: Click the icon in the system tray.
Page 286: Quick Connect
Quick Connect The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector. Once the projector utility is installed, launching the Quick Connect utility automatically opens the Wireless Data Projector Application.
Page 287 (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 288 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 289: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 290: Semi-Automatic Switch Feature
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears.
Page 291: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
Page 292 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE MIDI PCMCIA direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 293 SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 294 Glossary application—A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 295 byte—A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache.
Page 296 Glossary controller—A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU—See central processing unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 297 disk—A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive—The device that reads and writes information and programs on a diskette or hard disk.
Page 298 Glossary DVD-ROM (digital versatile [or video] disc read-only memory)—A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation—A technique in which a device or program imitates another device or program.
Page 299 Compare software. Hibernation—A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 300 Glossary hot swapping—The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change. icon—A small image displayed on the screen that represents a function, file, or program. interlaced—A method of refreshing a computer screen, in which only every other line of pixels is refreshed.
Page 301 local area network—See LAN. logical drive—A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.
Page 302 Glossary non-interlaced—A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk—A disk for storing programs and data that cannot be used to start the computer.
Page 303 port—A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor—See central processing unit (CPU). program—A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility.
Page 304 Glossary ROM (read-only memory)—Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
Page 305 universal serial bus (USB)—A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all-purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial.
Page 306: Index
Index Numerics 101-key keyboard 85 AC adapter 52 AC power cable connectors 276 accessories carrying cases 81 Add Printer Wizard 69 adjusting recording quality 149 Alt keys 86 antenna connecting 77 arm/wrist strain 45 assign keys Fn-esse 227 audio .wav files 148 features 145 Auto-Run 146 avoiding injury 43...
Page 307 playing an audio 145 playing using Auto-Run 146 CD and DVDs viewing contents 102 CD/DVD creating 147 inserting 100 problem solving 258 channels DMA 248 IRQ 248 character keys 85 charging the battery 55 checking device properties 250 click 59 communications network connection 137 programs 104...
Page 308 Index a disk 256 running slow 257 diskette drive cannot insert a diskette 257 cannot read a diskette 258 connecting 72 external, connecting 72 diskettes copying files to 95 display does not look normal/flickers external monitor not working latch 56 screen is blank 253 display device connecting 73...
Page 309 FN keys 86 Fn-esse starting 225 using to assign keys 227 Fn-esse program 225 assigning a key 225 using drag-and-drop 226 function keys 86 game box connection 162 hardware conflicts 247 resolving 248 headphones using 150 Help Windows XP Media Center Edition 246 Hibernation enabling 237...
Page 310 Index assign 227 changing 228 direct assign 227 popup 228 removing 228 key assignment viewing existing 228 key assignments changing or removing existing keyboard character keys 85 function keys 86 hot keys 275 not working 243 overlay keys 87 unexpected characters 253 Windows special keys 87 keyboard, external 67 keyboard, full-size 85...
Page 311 250 compact discs not running computer hangs when PC Card computer will not power up 243 contacting Toshiba 265 corrupted/damaged data files Device Manager 249 disabling a device 249 disk drive is slow 257...
Page 312 Index DVD-ROM or multi-function drive tray does not eject external display not working external keyboard not working external monitor 254 faulty memory 251 hardware conflict 247 high-pitched noise 259 illegal operation 242 Internet bookmarked site not found 246 Internet connection is slow 246 keyboard not responding 243 keyboard produces unexpected...
Page 313 135 taskbar 135 telephone line television Toshiba Toshiba Accessories Toshiba Console 229 Toshiba Hardware Setup 233 Toshiba online resources 113 Index low battery 122 going into more quickly 112 starting again from 113 Run dialog box 91 Windows Explorer 90...
Page 314 TV antenna port 78 Universal Resource Locator (URL) using modem 104 using a file extension 93 utilities Power Saver 230 Toshiba Power Saver Utility video cables 73 video display device connecting 73 volume mute hot key 269 warranty SelectServ 41...

This manual is also suitable for:

Qosmio e15 Qosmio e15 series

Toshiba E15-AV101 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Options

Chapter 5: Getting to Know the Windows XP Media Center Edition

Chapter 6: Toshiba Utilities

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba E15-AV101

Summary of Contents for Toshiba E15-AV101