HL‑L8260CDN / HL‑L9310CDW
Quick Setup Guide
Unpack the machine and check the components
Inbox Toner Cartridges*
(Black, Cyan, Magenta and Yellow)
Quick Setup Guide
1
Remove the packing materials and install the drum unit and toner cartridge assembly
Remove the packing tape.
1
2
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
4
Select your language (if needed)
For LCD models
1.
Press ▼ or ▲ to select [Initial Setup], and
then press OK.
2.
Press OK to select [Local Language].
3.
Press ▼ or ▲ to select your language, and then
press OK.
4.
Press Cancel.
Drum Unit*
Waste Toner Box*
Brother Installation Disc
Product Safety Guide
3
4
Front
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
The latest manuals are available at the Brother Solutions
Center: www.95105369.com.
NOTE:
* Already installed in the machine
• The available connection interfaces vary depending on the model.
• Interface cables are not included. If you require one, it will need to be
Belt Unit*
• The illustrations in this Quick Setup Guide show the HL-L9310CDW.
AC Power Cord
USB Interface Cable
Do not exceed this mark.
Adjust the paper
guides.
For Touchscreen models
1.
On the machine's Touchscreen, press
[设置](Settings) > [所有设置](All Settings) >
[初始设置](Initial Setup) > [语言](Local
Language).
2.
Press your language.
3.
Press
.
purchased. Use one of the following cables:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5e (or greater) twisted-pair
cable.
Secure Network Access
Your machine's default password is on the label on the back of the
machine (preceded by "Pwd").
We strongly recommend you change it to protect your machine from
unauthorised access.
CHN-ENG
Version B
1