Brother GT-541 Quick Manual
Hide thumbs
Also See for GT-541:
- Manual del instrucción (128 pages) ,
- Instruction manual (126 pages) ,
- Basic operation manual (53 pages)
Advertisement
Quick Links
9. Transporting GT-541
9. Transporting GT-541
This chapter describes how to transport GT-541.
Do not put your hands in the ink cartridge slot, otherwise the needle inside the slot may cause injury.
Setting up and moving of the printer should only be carried out by a qualified technician.
The printer machine weighs approximately 100 kg. Transporting and setting up of the printer should be
carried out by four or more people.
Furthermore, do not hold the printer by the ink cartridge housing when transporting it, otherwise the ink
cartridge housing may become damaged and the printer may fall down and cause personal injury or
damage to the printer.
Wait at least 1 minute after turning off the power switch before opening the front cover.
Touching the heat sink on the head can result in burns.
Be careful not to get your fingers caught when closing the front cover, otherwise it may result in injury to
your fingers.
Take care not to let the ink, waste liquid or wash liquid come into contact with your eyes or onto your skin,
otherwise inflammation can result.
Furthermore, do not drink the ink, waste liquid or wash liquid under any circumstances, as they can cause
vomiting and diarrhoea.
Keep the ink, waste liquid and wash liquid out of the reach of children.
258
WARNING
CAUTION
GT-541
Advertisement
Related Manuals for Brother GT-541
Summary of Contents for Brother GT-541
- Page 1 9. Transporting GT-541 9. Transporting GT-541 This chapter describes how to transport GT-541. WARNING Do not put your hands in the ink cartridge slot, otherwise the needle inside the slot may cause injury. CAUTION Setting up and moving of the printer should only be carried out by a qualified technician.
- Page 2 Waste Ink Cartridge Decompress Package Procedure (1) Seal the hole on the Filter Cartridge that the customer possesses with adhesive tape etc. Hole (2) Replace the Waste Ink Cartridge. (3) Make sure GT-541 is not in the middle of any operation. GT-541...
- Page 3 9. Transporting GT-541 (4) On the Control Panel, press the Platen Button to eject the Platen if it is not. Up Button OK Button Platen Button Down Button Stop Button (5) Press the OK Button to display the Menu Display.
- Page 4 9. Transporting GT-541 (9) Remove the Ink Cartridge whose ink you will drain, and then insert the Filter Cartridge, whose hole you sealed in step (1), into the same Ink Cartridge Slot. The following procedure shows the example of removing the “Black” Print Head. The procedure is the same for other colors.
- Page 5 (15) When the Tube cleaning is finished for all colors, check that the Filter Cartridges are inserted in all the Ink Cartridge Slots. (16) Turn off GT-541, and then open the Front Cover. (17) Remove one Filter Cartridge from the Ink Cartridge Slot, then remove the adhesive tape etc. that seals the hole, and then insert the Filter Cartridge into the Ink Cartridge Slot again.
- Page 6 9. Transporting GT-541 (19) Remove the four Print Heads. (See “6-1-2. Replacing the Print Heads” for details.) (20) Fit the Tube Joint 1 and 2 in the end of each of the disconnected Tubes. Tube Tube Joint 1 Tube Joint 2 (21) Attach the Nozzle Protect Film to each of the removed Print Heads.
- Page 7 9. Transporting GT-541 (22) Attach the Cap Tube to the Print Head, then attach the Tube Joint 1 to the Cap Tube, and then attach the Tube Joint 2 to the Tube Joint 1. Tube Joint 2 Tube Joint 1 Cap Tube (23) Put the Print Head in the IH Head Case, then fix the Case with a rubber band, adhesive tape, etc.
- Page 8 Covers are deformable. After transported; Follow the instructions of “2. Setting Up GT-541”. <Note> Not all instructions in “2. Setting Up GT-541” will apply to this situation, since the packing configuration differs from the factory default packing. GT-541...