Table of Contents
Advertisement
4.
Lower the bushing into the transport box.
5.
Attach the bushing to the transport box in the same way as when it was delivered.
6.
Close the transport box.
End of instruction
Installation and maintenance guide
1ZSC000563-AAB EN, REV. 6, 2019-09-12
CAUTION!
Make sure that the support blocks are in the correct positions in the transport box.
Make sure that the there is soft bedding in the transport box.
CAUTION!
Make sure that the test/voltage tap does not make contact with the transport box, or other
objects.
CAUTION!
Make sure that the bushing cannot move or rotate in the transport box.
NOTE!
Refer to Lifting the transport box, page
16
and Transportation, page 15.
61
Advertisement
Table of Contents
