Page 1 Projector PA721X/PA621X/PA671W PA621U/PA571W/PA521U PA722X/PA622X/PA672W PA622U/PA572W/PA522U User’s Manual Model No. NP-PA721X/NP-PA621X/NP-PA671W/NP-PA621U/NP-PA571W/ NP-PA521U/NP-PA722X/NP-PA622X/NP-PA672W/NP-PA622U/NP- PA572W/NP-PA522U...
Page 2 Ver. 1 08/2013 ® ® ® NOTES...
Page 3 Important Information Safety Cautions Precautions CAUTION CAUTION WARNING: DOC Compliance Notice (for Canada only) Machine Noise Information Regulation - 3. GPSGV, CAUTION Disposing of your used product...
Page 4 Important Information WARNING TO CALIFORNIA RESIDENTS: WASH HANDS AFTER HANDLING. RF Interference (for USA only) WARNING Important Safeguards Installation...
Page 5 Important Information WARNING Fire and Shock Precautions...
Page 6 Important Information CAUTION Caution on Handling the Optional Lens Remote Control Precautions...
Page 7 Important Information Note for US Residents Lamp Replacement [THE LAMP HAS REACHED THE END OF ITS US- ABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER. USE THE SPECIFIED LAMP FOR SAFETY AND PERFORMANCE.] A Lamp Characteristic CAUTION: About High Altitude mode About Copyright of original projected pictures: Turkish RoHS information relevant for Turkish market EEE Yönetmeliğine Uygundur.
Page 8 Important Information Health precautions to users viewing 3D images Power management function 1. STANDBY MODE (Factory preset: NORMAL) To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE]. NOTE: 2. AUTO POWER OFF (Factory preset: 30 minutes) To control the projector from an external device, select [OFF] for [AUTO POWER OFF].
Page 9 Table of Contents Important Information .................... 1. Introduction ......................1 ......................1 ..................2 ..........2 ....................2 ..................3 ..................................................................5 ................6 ..................7 ................8 ........................................................10 ..................11 2. Projecting an Image (Basic Operation) ..........
Page 10 Table of Contents ..........30 ....32 ......................32 ..............35 ........ 35 ......................36 ......... 37 ..........0 ..................7 ......................51 4. Using the Viewer ..................... 56 ................. 56 ................5 ............ 60 ....................60 ....................63 ..............6 ....................
Page 11 Table of Contents ..........................................8 ..............100 ........................ 100 ........................ 102 ....................103 ....................106 ...................... 108 ...................... 110 ..............112 ..................... 112 ....................... 113 ....................... 113 ....................... 113 .................... 11 .................... 11 ...................... 11 ...................... 115 ......................115 ..............
Page 12 Table of Contents ................162 8. User Supportware ..................167 ..................167 ................. 167 ............... 16 ........170 ....................173 ......................175 .................. 175 ........................177 ..........177 ............... 177 ......178 ......... 186 9. Appendix ......................187 ................187 ................
Page 13 201. Power cord (US: 7N080241) (EU: 7N080022) For North America only For customers in Europe: NEC Projector CD-ROM User’s manual (PDF) and the utility software (7N951971) 7N8N1551) (For Other countries than North America: 7N8N1551 and 7N8N1562) 7N8N1571) (For Other countries than North...
Page 14 1. Introduction Introduction to the Projector Congratulations on Your Purchase of the Projector Features you’ll enjoy: Model PA722X/PA721X/PA622X/ PA621X PA672W/PA671W/ PA572W/PA571W PA622U/PA621U/PA522U/ PA521U...
Page 15 1. Introduction ﬁlters About this user’s manual...
Page 16 1. Introduction Part Names of the Projector Front/Top Lens Shift Dial (vertical/horizontal) page 18) Indicator Section Zoom Lever/Zoom Ring ( page 21) page 6) Remote Sensor page 9) Remote Sensor (located on the front and the rear) Ventilation (outlet) page 9) Heated air is exhausted from here.
Page 17 1. Introduction Rear Remote Sensor (located on the Terminal Panel front and the rear) page 7) page 9) Ventilation (outlet) Ventilation (inlet) / Filter Cover Heated air is exhausted from here. The wireless LAN unit’s USB (LAN) port is located inside here. page 151, 155) AC Input Connect the supplied power cord’s...
Page 18 1. Introduction Control Panel/Indicator Section 2. POWER Indicator 13 1 25 21 3. STATUS Indicator 5. TEMP. Indicator 7. AUTO ADJ. Button 8. GEOMETRIC. Button 9. MENU Button 11. ENTER Button 12. EXIT Button...
Page 19 1. Introduction Terminal Panel Features 3. DisplayPort IN Connector...
Page 20 1. Introduction Part Names of the Remote Control 9. Edge Blend. Button 11. Geometric. Button 12. INPUT Button 13. PIP Button 16 35 15. AUTO ADJ. Button 35. SHUTTER Button 37. PICTURE Button 38. DISPLAY Button 39. ASPECT Button 1. Infrared Transmitter 2.
Page 21 1. Introduction Battery Installation Remote Control Precautions Operating Range for Wireless Remote Control 40 m/131.2 feet 20 m/65.6 feet Remote sensor on projector cabinet Remote control 40 m/131.2 feet 40 m/131.2 feet...
Page 22 1. Introduction Operating Environment for Software Included on CD-ROM NOTE: Download service...
Page 23 1. Introduction Operating Environment...
Page 24 2. Projecting an Image (Basic Operation) Flow of Projecting an Image Step 1 page 13) Step 2 page 14) Step 3 page 16) Step 4 page 17) page 22) Step 5 page 24) - Optimizing a computer signal automatically ( page 24) - Turning up or down volume ( Step 6...
Page 25 2. Projecting an Image (Basic Operation) Connecting Your Computer/Connecting the Power Cord This section will show you a basic connection to a computer. For information about other connections, see “(2) Making Connections” on page 143. Connect the computer cable (VGA) between the projector’s COMPUTER IN connector and the computer’s port (mini D-Sub 15 Pin).
Page 26 2. Projecting an Image (Basic Operation) Turning on the Projector 1. Remove the lens cap. 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator will turn to blue and the projector will become ready to use.
Page 27 2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) 1. Use the button to select one of the 27 languages from the menu. 2. Press the ENTER button to execute the selection.
Page 28 2. Projecting an Image (Basic Operation) Selecting a Source Selecting the computer or video source Detecting the Signal Automatically Using the Remote Control Selecting Default Source 1. Press the MENU button. The menu will be displayed. 2. Press the but- 3.
Page 29 2. Projecting an Image (Basic Operation) Adjusting the Picture Size and Position In this chapter drawings and cables are omitted for clarity. page 18) page 19) page 21) page 21) page 22)
Page 30 2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION Lens shift dial (Horizontal) Rightward Leftward Downward Upward Lens shift dial (Vertical) Turn the lens shift dials clockwise or counterclockwise. NOTE:...
Page 31 2. Projecting an Image (Basic Operation) PA600X/PA500X Height of projected image 0.5V Vertical shift range (0 to 0.5V) 0.1V 0.1H 0.1H 0.3H 0.3H Focus Focus ring...
Page 32 2. Projecting an Image (Basic Operation) Applicable lens: NP11FL 1. Turn the distortion ring to the left edge. Lens shift dials Distortion ring 2. Turn the focus lever clockwise and counterclockwise to adjust the focus at the center of the screen. Focus lever 3.
Page 33 2. Projecting an Image (Basic Operation) Zoom Zoom ring Adjusting the Tilt Feet 1. Turn the left and right tilt feet to adjust. The tilt feet lengthen and shorten when turned. The height of the projected image is adjusted by turning the left and right tilt feet.
Page 34 2. Projecting an Image (Basic Operation) Correcting Keystone Distortion tor cabinet. The Keystone screen will be displayed on the screen. Projected area Screen frame 2. Press the so that the left and right sides of the projected image are parallel. * Adjust the vertical keystone distortion.
Page 35 2. Projecting an Image (Basic Operation) 5. Repeat steps 2 and 4 to correct keystone distortion. The Keystone screen will disappear. ton to display the Keystone screen and repeat above steps 1 to 6. NOTE:...
Page 36 2. Projecting an Image (Basic Operation) Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust [Poor picture] [Normal picture] NOTE: 94 9 Turning Up or Down Volume Increase volume Decrease volume NOTE:...
Page 37 2. Projecting an Image (Basic Operation) Turning off the Projector 1. First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote con- trol. The [POWER OFF / ARE YOU SURE ? / CARBON SAV- INGS- SESSION 0.000[g-CO2]] message will appear.
Page 38 2. Projecting an Image (Basic Operation) After Use 1. Unplug the power cord. 2. Disconnect any other cables. 3. Mount the lens cap on the lens. 4. Before moving the projector, screw in the tilt feet if they have been lengthened.
Page 39 3. Convenient Features Turning off the Image and Sound NOTE: Freezing a Picture Enlarging a Picture...
Page 40 3. Convenient Features 2. Press the button. The area of the magniﬁed image will be moved Each time the D-ZOOM (−) button is pressed, the image is reduced. Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE] 2. Use the 3.
Page 41 3. Convenient Features Checking Energy-Saving Effect [CARBON METER]...
Page 42 3. Convenient Features Using the Optional Remote Mouse Receiver (NP01MR) Connecting the remote mouse receiver to your computer Computer Remote mouse receiver To USB port of PC or Macintosh When operating a computer via the remote mouse receiver 7 m/22 feet Remote sensor on the remote mouse receiver When connecting using the USB terminal...
Page 43 3. Convenient Features Operating your computer’s mouse from the remote control NOTE:...
Page 44 3. Convenient Features Correcting Horizontal and Vertical Keystone Distortion [COR- NERSTONE] Cornerstone Current adjustments for [KEYSTONE] or [CORNERSTONE] will be cleared. 2. Project an image so that the screen is smaller than the area of the raster. 3. Pick up any one of the corners and align the corner of the image with a corner of the screen. Projected image The drawing shows the up- per right corner.
Page 45 3. Convenient Features 7. Use the button to move the projected image frame as shown on the example. 8. Press the ENTER button. 9. Use the button to select another icon which points in the direction. On the Cornerstone adjustment screen, select [EXIT] or press the EXIT button on the remote control. The conﬁrmation screen is displayed.
Page 46 3. Convenient Features PA722X/PA721X/PA622X/PA621X/PA672W/PA671W/PA572W/PA571W PA622U/PA621U/PA522U/PA521U...
Page 47 3. Convenient Features Displaying Two Pictures at the Same Time Selecting the PIP or PICTURE BY PICTURE Mode [MODE] Main picture picture Main picture Sub picture...
Page 48 3. Convenient Features 1. Press the PIP button on the remote control. The PIP/PICTURE BY PICTURE SOURCE screen will be displayed. 2. Use the button to select the source and press the ENTER button. The PIP screen or PICTURE BY PICTURE screen will be displayed, depending on which was selected in the [MODE] setting screen.
Page 49 3. Convenient Features Preventing the Unauthorized Use of the Projector [SECURITY] 1. Press the MENU button. The menu will be displayed. 2. Press the 3. Press the 4. Press the The OFF/ON menu will be displayed. 5. Press the The [SECURITY KEYWORD] screen will be displayed. 6.
Page 50 3. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The conﬁrmation screen will be displayed. The SECURITY function has been enabled. 1. Press the POWER button. The projector will be turned on and display a message to the effect that the projector is locked. 2.
Page 51 3. Convenient Features 1. Press the MENU button. The menu will be displayed. The OFF/ON menu will be displayed. The SECURITY KEYWORD screen will be displayed. 4. Type in your keyword and press the ENTER button. When the correct keyword is entered, the SECURITY function will be disabled.
Page 52 3. Convenient Features Controlling the Projector by Using an HTTP Browser Overview To use wireless LAN connection, the optional USB Wireless LAN Unit is required. ( page 151) To use wired/wireless LAN connection, connect the projector to the computer with a commercially available LAN cable.
Page 53 3. Convenient Features Handling of the Address for Operation via a Browser PROJECTOR ADJUSTMENT ON ......Power is switched on. OFF ......Power is switched off......Increases the volume adjustment value......Decreases the volume adjustment value. PICTURE ON ..Mutes the video. PICTURE OFF ..
Page 54 3. Convenient Features BRIGHTNESS ..Increases the brightness adjustment value. BRIGHTNESS ..Decreases the brightness adjustment value. CONTRAST ..Increases the contrast adjustment value. CONTRAST ..Decreases the contrast adjustment value. COLOR ....Increases the color adjustment value. COLOR ....Decreases the color adjustment value....
Page 55 3. Convenient Features NETWORK SETTINGS WIRED or WIRELESS Setting for WIRED LAN...
Page 56 3. Convenient Features NOTE:...
Page 57 3. Convenient Features NOTE:...
Page 58 3. Convenient Features...
Page 59 3. Convenient Features Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR] Operation Environment The input selection window appears. Another way to display the input selection window is to press the NETWORK button on the remote control. The APPLICATION MENU screen will be displayed.
Page 60 3. Convenient Features 2. Press the In the screen, the [APPLICATION MENU] menu is displayed. The [PROJECTOR NAME/DISPLAY RESOLUTION/PASSWORD/URL] will be displayed.
Page 61 3. Convenient Features When the [Permission Connect to a Network Projector] window appears, click [Yes.]. The “Connect to a Network Projector” window appears. In the “Available projectors” box, “PA600 Series” is displayed. The message “Enter the password for the projector that you selected.” is displayed at the bottom of the window.
Page 62 3. Convenient Features 7. Input the password to the password input box displayed by the operation at step 3 on page 44. The network projector function works and the screen of Windows 7 is projected from the projector. PROJECTOR function may not work. If this happens, change the resolution of the computer’s screen to lower resolution than the one displayed at Step 3 on page 48.
Page 63 3. Convenient Features Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP] NOTE:...
Page 64 3. Convenient Features Setting the password to the user account of Windows 7 The Administrator is changed to [Password Protection]. Setting the Remote Access The [System Properties] window appears.
Page 65 3. Convenient Features The [Local Area Connection Status] window appears. Write down the value for “IPv4 IP Address” (xxx.xxx.xxx.xxx) displayed. The system goes back to the desktop. The input selection window appears. Another way to display the input selection window is to press the NETWORK button on the remote control. The NETWORK screen will be displayed.
Page 66 3. Convenient Features 2. Press the The [NETWORK] menu will be displayed. The [REMOTE DESKTOP CONNECTION] window appears. The log-on screen of Windows 7 is displayed in the screen projected by the projector. The remote desktop function is started. Windows 7 desktop is displayed in the screen projected by the projector. Log out the computer.
Page 67 3. Convenient Features The remote desktop function is stopped. When using the remote control, press a button other than the NETWORK button.
Page 68 4. Using the Viewer What you can do with the Viewer Supported graphic formats Supported movie ﬁles...
Page 69 4. Using the Viewer NOTE: Supported PDF ﬁles NOTE: Supported PowerPoint ﬁles NOTE: Supported USB memory devices...
Page 70 4. Using the Viewer Notices on shared folder and media server NOTE: NOTE...
Page 71 4. Using the Viewer Preparing presentation materials for supported ﬁle formats. With Viewer PPT Converter 3.0 contained the supplied CD-ROM, you can convert your PowerPoint ﬁles to index ﬁles that can be displayed on the Viewer. cannot be done in Adobe Reader. ton.
Page 72 4. Using the Viewer Projecting images stored in a USB memory device Starting the Viewer 1. Turn on the projector. ( page 14) 2. Insert the USB memory into the USB port of the projec- tor. NOTE: A press of the SOURCE button will display the source select screen.
Page 73 4. Using the Viewer 4. Press the ENTER button. The “USB1” thumbnail screen will be displayed. 5. Use the button to select an icon. (arrow) symbol on the right indicates there are more pages. pressing the PAGE (page down) button will show the next page: pressing the PAGE (page up) will show the previous page.
Page 74 4. Using the Viewer The movie ﬁle will start playing. After ﬁnishing the playback, the screen will turn to black. Press the EXIT button to return to the thumbnail screen. control bar with which you can pause or fastforward and some other operations.
Page 75 4. Using the Viewer Converter 3.0, will appear in the Thumbnail screen. Only folders and JPEG files converted by using Viewer PPT Converter 3.0 will appear in the Thumbnail screen. TION] folder in the DRIVE LIST screen. XXXX Motors However, index ﬁles will not appear. Only folders and JPEG ﬁles will appear.
Page 76 4. Using the Viewer Names and functions of Viewer screen Cursor (yellow) Scroll bar Menu Menu Cursor (yellow) Folder icon [Drive list screen] [Thumbnail screen] Path information Drive information/File information Operation button guide Menu guide Control bar * The operation for still image differs from that for movie. [Slide screen] Menu operation button to move the cursor up or down.
Page 77 4. Using the Viewer Functions NOTE:...
Page 78 4. Using the Viewer Menu operation button to move the cursor up or down. Select the menu item and press the ENTER button to display the menu or setting screen. 1. Press the button to move the cursor to the thumbnail screen when the OPTIONS menu is not dis- played.
Page 79 4. Using the Viewer 1. Pressing the ENTER button in Slide screen will display the control bar at the bottom of the screen. 2. Use the button to select a ﬁle and press the ENTER button.
Page 80 4. Using the Viewer...
Page 81 4. Using the Viewer Viewer option settings...
Page 82 4. Using the Viewer —...
Page 83 4. Using the Viewer der. order.
Page 84 4. Using the Viewer Projecting data from shared folder Shared folder Wireless LAN Projector Shared folder Preparation Connecting the projector to the shared folder The drive list window will be displayed. page...
Page 85 4. Using the Viewer Press the button to select the (OPTIONS) icon and press the ENTER button. Press the button to select the (SHARED FOLDER SETTING) icon and press the ENETR button. 4. Select a folder number and place to enable it. Press the button to a shared folder number and press the button to select [ENABLE] , and then press...
Page 86 4. Using the Viewer 6. Exit the setting. Press the button to select [OK] and press the ENTER button. This will close the [SHARED FOLDER] screen.
Page 87 4. Using the Viewer Disconnecting the shared folder from the projector Press the button to select [ENABLE] and press the ENTER button to clear it. NOTE:...
Page 88 4. Using the Viewer Projecting data from media server Media server Wireless LAN Media server Projector Media server Setting up “Media Sharing” in Windows Media Player 11 1. Start Windows Media Player 11. The “Media Sharing” dialog box will be displayed.
Page 89 4. Using the Viewer A list of accessible devices will be displayed. A check mark will be added to the “PA600 Series” icon. This will make pictures and video in “Library” available from the projector.
Page 90 4. Using the Viewer Setting up “Media Sharing” in Windows Media Player 12 1. Start Windows Media Player 12. The “Allow All Media Devices” windows will be displayed. Graphics and movie ﬁles in “Library” can be used from the projector.
Page 91 4. Using the Viewer Connecting the projector to the media server...
Page 92 4. Using the Viewer Disconnecting the projector from the media server 1. Display the OPTIONS menu. Press the button to select the [OPTIONS] icon and select the ENTER button. Press the button to select the MEDIA SERVER icon and press the ENTER button. 3.
Page 93 4. Using the Viewer Restrictions on displaying ﬁles Some restrictions on PowerPoint ﬁles Some restrictions on PDF ﬁles...
Page 94 5. Using On-Screen Menu Using the Menus 1. Press the MENU button on the remote control or the projector cabinet to display the menu. 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3.
Page 95 5. Using On-Screen Menu Menu Elements Slide bar Solid triangle Available buttons Source Menu mode Highlight Radio button Wireless symbol ECO mode symbol Off Timer remaining High Altitude symbol time Thermometer symbol Key Lock symbol Highlight ......Indicates the selected menu or item. Solid triangle ......Indicates further choices are available.
Page 96 5. Using On-Screen Menu List of Menu Items...
Page 97 5. Using On-Screen Menu 日本語 ČEŠTINA РУССКИЙ, , Ελληνικά, 中文, ROMÂNĂ, HRVATSKA, БЪЛГАРСКИ, INDONESIA, हिन् द ी, ไทย...
Page 98 5. Using On-Screen Menu...
Page 99 5. Using On-Screen Menu Menu Descriptions & Functions [SOURCE] COMPUTER 1, 2, and 3 HDMI DisplayPort VIDEO VIEWER NETWORK ENTRY LIST TEST PATTERN...
Page 100 5. Using On-Screen Menu Using the Entry List Displaying the Entry list 1. Press the MENU button. The menu will be displayed. 2. Press the The SOURCE list will be displayed. 3. Use the , or The ENTRY LIST windows will be displayed. If the ENTRY LIST window is not displayed, switch the menu to [ADVANCED].
Page 101 5. Using On-Screen Menu 1. Press the button to select any number. 2. Press the Calling up a signal from the Entry List [LOAD] Editing a signal from the Entry List [EDIT] 1. Press the button to select a signal you wish to edit. 2.
Page 102 5. Using On-Screen Menu Cutting a signal from the Entry List [CUT] 1. Press the button to select a signal you wish to delete. 2. Press the , or The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom of the Entry List.
Page 103 5. Using On-Screen Menu Menu Descriptions & Functions [ADJUST] [PICTURE] [MODE] STANDARD .... Saves settings for each item of [PRESET] (Preset 1 through 7) PROFESSIONAL ..Saves all the settings of [PICTURE] for each input. [PRESET] HIGH-BRIGHT ..Recommended for use in a brightly lit room. PRESENTATION ..
Page 104 5. Using On-Screen Menu [GENERAL] HIGH-BRIGHT ..Recommended for use in a brightly lit room. PRESENTATION ..Recommended for making a presentation using a PowerPoint ﬁle. VIDEO ....Recommended for typical TV program viewing. MOVIE ....Recommended for movies. GRAPHIC ....Recommended for graphics. sRGB .....
Page 105 5. Using On-Screen Menu [COLOR CORRECTION] RED ....... Adjusts the color in red areas, centered around the red. This can be used to adjust to a yellow- or magenta-tinged red. GREEN ....Adjusts the color in green areas, centered around the green. This can be used to adjust to a yellow- or cyan-tinged green.
Page 106 5. Using On-Screen Menu [IMAGE OPTIONS] CLOCK ....Use this item to ﬁne tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustment may be necessary when you connect your computer for the ﬁrst time.
Page 107 5. Using On-Screen Menu Projected image Overscaned by 10%...
Page 108 5. Using On-Screen Menu Selecting the Aspect Ratio [ASPECT RATIO] For Computer signal...
Page 109 5. Using On-Screen Menu [RESOLUTION]...
Page 110 5. Using On-Screen Menu [VIDEO] Using Noise Reduction [NOISE REDUCTION] RANDOM NR ..Reduces ﬂickering random noise in an image. MOSQUITO NR ..Reduces mosquito noise that appears around the edges of an image during DVD playback. BLOCK NR ..... Reduces block noise or mosaic-like patterns by selecting ON. Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE] AUTO .....
Page 111 5. Using On-Screen Menu AUTO ..... The video level is switched automatically based on the information from the device outputting the signal. Depending on the connected device, this setting may not be made properly. In this case, switch to “NORMAL” or “ENHANCED”...
Page 112 5. Using On-Screen Menu Menu Descriptions & Functions [SETUP] [BASIC] Selecting Cornerstone Mode [CORNERSTONE]...
Page 113 5. Using On-Screen Menu Using the Wall Color Correction [WALL COLOR] Setting Eco Mode [ECO MODE] Setting Closed Caption [CLOSED CAPTION] OFF ......This exits the closed caption mode. CAPTION 1-4 ..Text is superimposed. TEXT 1-4 ....Text is displayed. Using Off Timer [OFF TIMER] 1.
Page 114 5. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] Turning messages on and off [MESSAGE DISPLAY] ID DISPLAY ... This option turns on or off the ID number which is displayed when the ID SET button on the remote control is pressed.
Page 115 5. Using On-Screen Menu Selecting Menu Display Time [DISPLAY TIME] Selecting Interval Time for Filter Message [FILTER MESSAGE] [INSTALLATION(1)]...
Page 116 5. Using On-Screen Menu Selecting Aspect Ratio and Position for Screen [SCREEN] NOTE: Using Geometric Correction [GEOMETRIC CORRECTION] NOTE: Using Multi-Screen Compensation [MULTI-SCREEN COMP.] MODE ....OFF: Turns off this function to return to the normal brightness.
Page 117 5. Using On-Screen Menu ON: Turns on this function to make the screen darker. The [BRIGHTNESS] and the [CONTRAST] can be adjusted. CONTRAST .... Adjusts the bright part of the picture. BRIGHTNESS ..Adjusts the dark part of the picture. 1.
Page 118 5. Using On-Screen Menu [INSTALLATION(2)] NOTE: Selecting Communication Speed [COMMUNICATION SPEED] NOTE: Turning On or Off Remote Sensor [REMOTE SENSOR] CONTROL ID NUMBER ..Select a number from 1 to 254 you wish to assign to your projector. CONTROL ID .......Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID set- ting.
Page 119 5. Using On-Screen Menu Assigning or Changing the Control ID 1. Turn on the projector. 2. Press the ID SET button on the remote control. The CONTROL ID screen will be displayed. If the projector can be operated with the current remote control ID, the [ACTIVE] will be displayed.
Page 120 5. Using On-Screen Menu [OPTIONS(1)] OFF ......The computer signal will not be automatically adjusted. You can manually optimize the computer signal. NORMAL ....Default setting. The computer signal will be automatically adjusted. Normally select this option. FINE ....... Select this option if ﬁne adjustment is needed. It takes more time to switch to the source than when [NOR- MAL]is selected.
Page 121 5. Using On-Screen Menu RGB/COMPONENT . RGB and component signals are identiﬁed automatically. VIDEO ....This switches to the video signal. [SEAMLESS SWITCHING] [COLOR SYSTEM] [DIGITAL AUDIO SELECT] HDMI ..... HDMI: Selects the HDMI input connector’s digital audio. COMPUTER2: Selects the COMPUTER2 audio input connector. DisplayPort ....
Page 122 5. Using On-Screen Menu [OPTIONS(2)] Selecting Power-saving in [STANDBY MODE] NORMAL ......Power indicator: Orange light/STATUS indicator: Green light POWER-SAVING ....Power indicator: Red light/STATUS indicator: Off The following connectors, buttons or functions will not work during this mode. - MONITOR OUT (COMP. 1) connector, and AUDIO OUT connector - LAN and Mail Alert functions - Buttons other than POWER button on the cabinet - Buttons other than POWER ON button on the remote control...
Page 123 5. Using On-Screen Menu NOTE: Selecting Default Source [DEFAULT SOURCE SELECT] LAST ...... Sets the projector to default to the previous or last active input each time the projector is turned on. AUTO ..... Searches for an active source in order of COMPUTER1 COMPUTER2 COMPUTER3 HDMI...
Page 124 5. Using On-Screen Menu Menu Descriptions & Functions [INFO.] [USAGE TIME] ECO MODE Replacement lamp NORMAL 3000...
Page 125 5. Using On-Screen Menu [SOURCE(1)] [SOURCE(2)] [WIRED LAN]...
Page 126 5. Using On-Screen Menu [WIRELESS LAN(1)] [WIRELESS LAN(2)] [VERSION(1)]...
Page 127 5. Using On-Screen Menu [VERSION(2)] [OTHERS]...
Page 128 5. Using On-Screen Menu Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] EXCEPT Clearing Lamp Hour Meter [CLEAR LAMP HOURS]...
Page 129 5. Using On-Screen Menu Clearing the Filter Usage Hours [CLEAR FILTER HOURS]...
Page 130 5. Using On-Screen Menu Application Menu IMAGE EXPRESS UTILITY DESKTOP CONTROL UTILITY...
Page 131 5. Using On-Screen Menu NETWORK PROJECTOR REMOTE DESKTOP CONNECTION NOTE:...
Page 132 5. Using On-Screen Menu NETWORK SETTINGS Hints on How to Set Up LAN Connection To connect a DHCP server: To select an SSID: To receive lamp replacement time or error messages via e-mail:...
Page 133 5. Using On-Screen Menu —...
Page 134 5. Using On-Screen Menu — — — NOTE:...
Page 135 5. Using On-Screen Menu — ....... Wireless access point ....... Ad Hoc PC ....... WEP or WPA enabled — DISABLE ....Will not turn on the encryption feature. Your com- munications may be monitored by someone. WEP(64bit) .... Uses 64-bit datalength for secure transmis- sion.
Page 136 5. Using On-Screen Menu...
Page 137 5. Using On-Screen Menu page 140) 2. Use a computer to save digital certiﬁcates (ﬁles) for WPA-EAP or WPA2-EAP setting to your USB memory device. After completing saving the ﬁle, remove the USB memory device from the computer. 3. Plug the USB memory device into the USB port of the projector. Setting Procedures PSK, WPA-EAP, or WPA2-EAP is not available.
Page 138 5. Using On-Screen Menu The “SSID” list will be displayed. Finally press the ENTER button. )] for [NETWORK TYPE]. WPA-PSK, WPA2-PSK, WPA-EAP, or WPA2-EAP is not available when [AD HOC ( )] is selected. The [SECURITY] page will be displayed. The pull-down list will be displayed.
Page 139 5. Using On-Screen Menu The [AUTHENTICATION] page will be displayed. Select either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setting items vary depending on the EAP type. See the table below. Selecting [EAP-TLS] for [EAP TYPE]: The following section explains the operation for selecting [EAP-TLS]. For selecting [PEAP-MSCHAPv2], go on to Step 12 on page 129.
Page 140 5. Using On-Screen Menu A list of ﬁles (thumbnail screen) will be displayed. NOTE: Installing a digital certiﬁcate and press the ENTER button. The password screen will be displayed. The character entry screen (software keyboard) will be displayed. Set the password of the private key. A password must be 1 character or more and 32 characters or less.
Page 141 5. Using On-Screen Menu 17. On the thumbnail screen, select a digital certiﬁcate (DER format ﬁle) saved in your USB memory device and press the ENTER button. The selected digital certiﬁcate will be installed on the projector. The [WIRELESS] page will be returned. A message for conﬁrmation will be displayed.
Page 142 5. Using On-Screen Menu The character entry screen (software keyboard) will be displayed. Set a password. The drive list screen will be displayed. NOTE: Installing a digital certiﬁcate 17. On the thumbnail screen, select a digital certiﬁcate (DER format ﬁle) saved in your USB memory device and press the ENTER button.
Page 143 5. Using On-Screen Menu The [WIRELESS] page will be returned. A message for conﬁrmation will be displayed. The digital certiﬁcates will be cleared. The character entry screen (software keyboard) will be displayed. 2. Use the , or button to select a character and press the ENTER button. key, use alphanumeric characters (ASCII).
Page 144 5. Using On-Screen Menu...
Page 145 5. Using On-Screen Menu...
Page 146 5. Using On-Screen Menu — Placing a checkmark will turn on the Alert Mail feature. Clearing a checkmark will turn off the Alert Mail feature. — NOTE:...
Page 147 5. Using On-Screen Menu — Placing a checkmark will enable detecting the projector from AMX Device Discovery. Clearing a checkmark will disable detecting the projector from AMX Device Discovery.
Page 148 5. Using On-Screen Menu TOOLS ADMINISTRATOR MODE — Placing a check mark will not save your projector settings. — Clear this check box to save your projector settings. NOTE:...
Page 149 5. Using On-Screen Menu PROGRAM TIMER NOTE: Setting a new program timer 1. On the PROGRAM TIMER screen, use the ton. The [PROGRAM LIST] screen will be displayed. 2. Select a blank program number and press the ENTER button. The [EDIT] screen will be displayed. 3.
Page 150 5. Using On-Screen Menu DAY ......Select days of the week for the program timer. To execute the program from Monday to Friday, select [MON- FRI].To execute the program in everyday basis, select [EVERYDAY]. TIME ...... Set the time to execute the program. Enter time in 24-hour format. FUNCTION .....
Page 151 5. Using On-Screen Menu Activating the program timer The [ENABLE] will be activated. The [PROGRAM TIMER] screen will be changed to the [TOOL] screen. NOTE: Changing the programmed settings The programmed settings will be changed. You will be returned to the [PROGRAM LIST] screen. Changing the order of programs but- ton.
Page 152 5. Using On-Screen Menu DATE ANDTIME TIME ZONE SETTINGS ....Select your time zone. DATE AND TIME SETTINGS ..Set your current date (MM/DD/YYYY) and time (HH:MM). INTERNET TIME SERVER ..If you place a check mark, the projector’s built-in clock will be synchronized with an Internet time server in every 24 hours and at the time of projector’s startup.
Page 153 6. Connecting to Other Equipment Mounting a lens (sold separately) NOTE: Mounting the lens 1. Remove the dust cap from the projector. 2. Remove the lens cap on the back of the lens. 3. Insert the lens onto the projector with the yellow-marked Guiding notch protrusion on the lens facing upwards.
Page 154 4. Turn the lens clockwise. Turn until a click is heard. The lens is now fastened onto the projector. Removing the lens 1. While pressing the lens release button on the projector’s front panel fully in, turn the lens counterclockwise. The lens comes off.
Page 155 6. Installation and Connections Making Connections Analog RGB signal connection AUDIO IN COMPUTER IN BNC IN AUDIO IN Stereo mini-plug RGB - to - BNC cable audio cable (not (not supplied) supplied) Stereo mini-plug audio cable (not supplied) Computer cable (VGA) (supplied) To mini D-Sub 15-pin connector on the projector.
Page 156 6. Installation and Connections Digital RGB signal connection HDMI 2 IN DisplayPort IN HDMI 1 IN DisplayPort cable (not supplied) HDMI cable (not supplied) NOTE:...
Page 157 6. Installation and Connections ® ® HDMI 2 IN HDMI 1 IN AUDIO IN...
Page 158 6. Installation and Connections Connecting an External Monitor HDMI OUT AUDIO OUT Stereo mini-plug audio cable (not supplied) HDMI cable (not supplied) HDMI IN AUDIO IN Computer cable (VGA) (supplied) NOTE:...
Page 159 6. Installation and Connections Connecting Your DVD Player or Other AV Equipment AUDIO IN Audio cable (not supplied) BNC cable (not supplied) Audio equipment Audio cable (not supplied) NOTE:...
Page 160 6. Installation and Connections Connecting Component Input AUDIO IN COMPUTER IN AUDIO IN 15-pin - to - RCA (female) × 3 cable adapter (ADP-CV1E) RCA (female) - to - BNC (male) connector (not supplied) Stereo mini plug - to - RCA audio cable (not supplied) Component video RCA ×...
Page 161 6. Installation and Connections Connecting HDMI Input HDMI 1 IN HDMI 2 IN HDMI cable (not supplied) Use High Speed HDMI ® Cable. Audio cable (not supplied)
Page 162 6. Installation and Connections Connecting to a Wired LAN Example of LAN connection Server LAN cable (not supplied)
Page 163 6. Installation and Connections Connecting to a Wireless LAN (sold separately) Important: Flow of Setting Wireless LAN Step 1: Attach the USB Wireless LAN Unit to the projector if required. Step 2: page 120) Step 3: page 121) Mounting a wireless LAN unit CAUTION:...
Page 164 6. Installation and Connections 1. Press the button to set the projector to the standby mode, then disconnect the power cord. Filter cover Wait for the projector to fully cool off. 2. Remove the ﬁlter cover. Pressing the buttons on the left and right sides of the ﬁlter cover upwards, pull the ﬁlter cover towards you to remove it.
Page 165 6. Installation and Connections To remove the wireless LAN unit 1. Remove the ﬁlter unit following steps 1 to 3 above. 2. Remove the wireless LAN unit. If the wireless LAN unit is hard to remove, place a cloth, etc., over needle- nose pliers to grasp the wireless LAN unit and pull it out.
Page 166 6. Installation and Connections PC with wireless PC with built-in wireless LAN card inserted LAN function USB Wireless LAN Unit Wireless access point Wired LAN USB Wireless LAN Unit PC with wireless PC with built-in wireless LAN card inserted LAN function...
Page 167 6. Installation and Connections Projecting Portrait Images Caution on placing in portrait orientation...
Page 168 6. Installation and Connections Reference drawing [Side View] [Front View] [Bottom View] 4-M4 screw hole 310 mm or longer Filter cover Remove tilt foot Rear foot 130 or longer Filter cover (open) Horizontal adjuster 1. Pull and remove the lever cover. 2.
Page 169 6. Installation and Connections 3. Move the lever upward until it stops and then secure the screw. 4. Put the lever cover back.
Page 170 7. Maintenance Cleaning the Filters CAUTION 1. Push up the buttons on the left and right to release the ﬁlter unit and pull it out. Filter cover Button 2. Remove the ﬁlter unit by pulling out the tab. Filter unit 3.
Page 171 7. Maintenance (2) Push the left edges of the ﬁlters and remove the two hard honeycomb ﬁlters. - The ﬁlters cannot be removed by pressing the left and right edges. 4. Use a vacuum cleaner to vacuum all the dust inside. Get rid of dust in the accordion ﬁlter 5.
Page 172 7. Maintenance 8. Put the ﬁlter cover back to the projector cabinet. Catch Insert the 4 catches on the top of the ﬁlter cover into the grooves in the projector, then press the left and right buttons to close. Plug the power cord into the wall outlet, and then turn on the projector.
Page 173 7. Maintenance Cleaning the Lens Cleaning the Cabinet Vacuum the dust off the ventilation slits.
Page 174 7. Maintenance Replacing the Lamp and the Filters CAUTION Flow of Replacing the Lamp and the Filters Step 1. Replace the lamp Step 2. Replace the ﬁlters ( page 162) Step 3. page 116, 117)
Page 175 7. Maintenance To replace the lamp: 1. Remove the lamp cover. 2. Remove the lamp housing. CAUTION: Interlock Guide hole...
Page 176 7. Maintenance 3. Install a new lamp housing. 4. Reattach the lamp cover. This completes the lamp replacement. Go on to the ﬁlter replacement.
Page 177 7. Maintenance To replace the ﬁlters: 1. Push up the buttons on the left and right to release the ﬁlter unit and pull it out. Filter cover 2. Remove the ﬁlter unit by pulling out the tab. Filter unit 3. Remove the four ﬁlters. (1) Turn the ﬁlter unit over and pull out the two soft accordion ﬁlters (large and small).
Page 178 7. Maintenance (2) Push the left edges of the ﬁlters and remove the two hard honeycomb ﬁlters (large and small). The ﬁlters cannot be removed by pressing the left and right edges. 4. Remove dust from the ﬁlter unit and the ﬁlter cover. Clean both outside and inside.
Page 179 8. User Supportware Installing Software Program Installation for Windows software NOTE: The menu window will be displayed. the menu window will be displayed.
Page 180 8. User Supportware The installation will start. Uninstalling a Software Program Preparation: The Control Panel window will be displayed. The “Programs and Features” window will be displayed. 3 Select the software program and click it. Follow the instructions on the screens to complete the uninstallation. The Control Panel window will be displayed.
Page 181 8. User Supportware Installation for Macintosh software The menu window will be displayed. The “Image Express Utility 2” folder will be displayed. 2. Put the conﬁguration ﬁle of Image Express Utility 2 to the Trash icon. nec.nevt. ImageExpressUtility.plist”.
Page 182 8. User Supportware Operating the Projector Via the LAN (Virtual Remote Tool) Control Functions NOTE: Connect the projector to a LAN.
Page 183 8. User Supportware Start Virtual Remote Tool Start using the shortcut icon on the Windows Desktop. Start from the Start menu When Virtual Remote Tool starts for the ﬁrst time, “Easy Setup” window will be displayed. The “Easy Setup” feature is not available on this model. Click “Close Easy Setup”. Closing the “Easy Setup”...
Page 184 8. User Supportware on the Taskbar. The pop-up menu will be displayed. The Virtual Remote Tool will be closed. The pop-up menu will be displayed. The Help screen will be displayed. The Help screen will be displayed.
Page 185 8. User Supportware Projecting Your Computer’s Screen Image from the Projector over a LAN (Image Express Utility Lite) What you can do with Image Express Utility Lite Connect the projector to a LAN. Start Image Express Utility Lite. “Image Express Utility Image Express Utility Lite will start.
Page 186 Click “Help (C)” “Help” on the Cornerstone Edit screen. The Help screen will be displayed. Click “Start” “All programs” or “Programs” “NEC Projector User Supportware” “Image Express Utility Lite” “Image Express Utility Lite Help”. The Help screen will be displayed.
Page 187 8. User Supportware Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite) What you can do with GCT Multi-point Correction: Parameters Correction: The “4-point Correction” window will be displayed. A green frame and a mouse pointer ( ) will be displayed.
Page 188 8. User Supportware The currently selected [ ] mark will turn red. (In the above example, Windows screens are omitted for clariﬁcation.) ] mark will go to the position where the mouse cursor is. 5. Repeat Step 3 and 4 to correct the distortion of the projected image. 6.
Page 189 8. User Supportware Using the Projector to Operate Your Computer over a LAN (Desktop Control Utility 1.0) What you can do with Desktop Control Utility 1.0 Connecting the projector to a LAN...
Page 190 8. User Supportware Using the projector to operate your computer’s desktop screen [Change Procedure] <For Windows 7>...
Page 191 8. User Supportware The “Selection Of Network Connections” window is displayed. This displays a list of the network devices connected to the computer you are using. The “Startup password settings” window will be displayed. administrator password. Screen when Desktop Control Utility 1.0 is started ﬁrst time Screen if starting password has been set already...
Page 192 8. User Supportware The “Current password” window will be displayed. NOTE: 4 Write down the character string displayed in the password ﬁeld. Write down “PMHN” in the screen example of step 3. Desktop Control Utility 1.0 will be started. Move to the room where the projector is installed, with the paper on which you have written down the password in step 4.
Page 193 8. User Supportware 2 Turn on the power to the projector. Set the LAN setting of the projector in advance. The Source list will be displayed. In case of the remote control, press the NETWORK button. The “network menu” screen will be displayed, proceed to step 5. 4 Press the The “network menu”...
Page 194 8. User Supportware The “DESKTOP CONTROL UTILITY menu” screen will be displayed. A password input screen will be displayed. insertion point. 8 After inputting the password, click the You are returned to the “DESKTOP CONTROL UTILITY” menu screen. The “COMPUTER LIST” screen will be displayed. If the connection destination has not been found as a result of a COMPUTER SEARCH, search for the connection destination by inputting the IP address of the computer at the connection destination, click “Input IP Address”.
Page 195 8. User Supportware The desktop screen of the computer at the connection destination will be displayed.
Page 196 8. User Supportware <1> <2> <3> <4> <1> (cut-off icon) ..Disconnects communication with the computer. <2> (Shift icon) ..When the highlight is moved to this icon and the ENTER button is pressed, shift lock status is set. The shift lock is canceled if the highlight is moved to this icon and the ENTER button is pressed again.
Page 197 8. User Supportware Desktop Control Utility 1.0 will be terminated. 3 Press the EXIT button on the projector unit or on the remote control. The “network menu” screen will be displayed. 4 Press the MENU button on the projector unit or on the remote control. The on-screen menu will be displayed.
Page 198 “Help (H) …” of window of PC Control Utility Pro 4 in this order. The pop-up menu will be displayed. Click “Start” “All programs” or “Programs” “NEC Projector User Supportware” “PC Control Utility Pro 4” “PC Control Utility Pro 4 Help”. The Help screen will be displayed.
Page 199 9. Appendix Throw distance and screen size Lens types and throw distance PA722X/PA721X/PA622X/PA621X 1.8 - 3.7 3.6 - 5.8 5.7 - 8.7 7.6 - 11.6 3.0 - 6.1 7.3 - 11.7 11.5 - 17.6 6.1 - 12.3 23.2 - 35.3...
Page 200 9. Appendix PA672W/PA671W/PA572W/PA571W 0.7 - 1.0 1.0 - 1.3 1.3 - 2.5 1.5 - 2.0 3.8 - 6.1 2.0 - 2.6 2.6 - 5.1 5.1 - 8.2 8.0 - 12.2 2.5 - 3.3 6.3 - 10.2 7.6 - 12.3 12.1 - 18.5 3.8 - 5.0 15.2 - 23.1 5.1 - 6.7...
Page 201 9. Appendix NP11FL PA622U/PA621U/PA522U/PA521U: 0.7–2.6 m PA672W/PA671W/PA572W/PA571W: 0.7–2.6 m PA722X/PA721X/PA622X/PA621X: 0.6–2.5 m NP30ZL PA622U/PA621U/PA522U/PA521U: 1.0–11.3 m PA672W/PA671W/PA572W/PA571W: 1.0–11.3 m PA722X/PA721X/PA622X/PA621X: 1.0–10.9 m PA622U/PA621U/PA522U/PA521U: 1.0–11.3 m NP12ZL PA672W/PA671W/PA572W/PA571W: 1.0–11.3 m PA722X/PA721X/PA622X/PA621X: 1.0–10.9 m 40-150" 60-500" 60-500" 40-500" 60-500" 30-500" PA622U/PA621U/PA522U/PA521U: 1.2–31.9 m NP13ZL PA672W/PA671W/PA572W/PA571W: 1.2–32.1 m...
Page 202 9. Appendix Tables of screen sizes and dimensions PA722X/PA721X/PA622X/PA621X 4:3 screen size Screen 61.0 (diagonal) height 81.3 61.0 162.6 203.2 Screen width 228.6 365.8 812.8 1016.0 762.0 PA672W/PA671W/PA572W/PA571W/PA622U/PA621U/PA522U/PA521U Screen 16:10 screen size height (diagonal) 86.2 21.2 53.8 31.8 80.8 67.8 172.3...
Page 203 9. Appendix Lens shifting range Width of projected image 0.5V Height of projected image 0.1V 0.1H 0.1H 0.3H 0.3H 0.3H 0.3H 0.1H 0.1H 0.1V Height of projected image 0.5V Width of projected image Width of projected image 0.6V Height of projected image 0.1H 0.1H...
Page 204 9. Appendix 0.3H 0.3H 0.1H 0.1H 0.1V Height of projected image 0.6V Width of projected image Width of projected image 0.5V Height of projected image 0.1V 0.1H 0.1H 0.3H* 0.3H* 0.3H* 0.3H* 0.1H 0.1H 0.1V Height of projected image 0.5V Width of projected image NOTE* PA571W/PA622U/PA621U/PA522U/PA521U.
Page 205 9. Appendix Compatible Input Signal List Analog Computer Signal 1152 60/70/75/85 1280 1280 1360 1366 1280 60/75/85 1280 60/75/85 1050 60/75 1600 1600 1200 60/65/70/75 1680 1050 1200 1080 1080 1152 1280 Component 1080 50/60 1080 1280 50/60...
Page 206 9. Appendix HDMI 1280 1280 1280 1366 1280 1280 1050 1600 1680 1050 1600 1200 1080 1200 1080 1536 1728 2560 2560 1600 2160 2160 1080 1080 1280 50/60 HDMI 3D...
Page 207 9. Appendix DisplayPort 1280 1280 1280 1366 1280 1280 1050 1600 1680 1050 1600 1200 1080 1200 1080 1536 1728 2560 2560 1600 2160 2160 1080 1280 50/60 DisplayPort 3D...
Page 208 9. Appendix Speciﬁcations PA722X/PA721X/PA622X/PA621X/PA672W/PA671W/PA572W/PA571W/PA622U/ PA621U/PA522U/PA521U PA722X/PA721X/PA622X/PA621X...
Page 209 9. Appendix PA722X/PA721X/PA622X/PA621X/PA672W/PA671W/PA572W/PA571W/PA622U/ PA621U/PA522U/PA521U ® 0.2W ®...
Page 210 9. Appendix Cabinet Dimensions 499 (19.6) Lens center Lens center 250 (9.8) Holes for ceiling mount...
Page 211 9. Appendix Mounting the cable cover (sold separately) appearance. CAUTION Mounting 1. Connect the power cord and cables to the projector (the connection cords are omitted from the diagrams). 2. Prepare a Phillips screwdriver. 1. Insert the two round protrusions on the left and right edges of the cable cover into the grooves in the bottom of the projector to line it up.
Page 212 9. Appendix Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector Pin No. 11 12 13 14 15...
Page 213 9. Appendix Troubleshooting Indicator Messages Power Indicator Status Indicator...
Page 214 9. Appendix Lamp Indicator Temp. Indicator If the temperature protector is activated...
Page 215 9. Appendix Common Problems & Solutions Does not turn on or shut down control is on. ( pages 13, 14) page 161) room where you are presenting is particularly warm, move the projector to a cooler location. of its life. If so, replace the lamp. After replacing the lamp, reset the lamp hours used. ( page 116) meters or higher.
Page 216 9. Appendix Flicker appears on Set [FAN MODE] to other than [HIGH ALTITUDE] mode when using the projector at altitudes approximately 5500 screen feet/1600 meters or lower. Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to ﬂicker.
Page 217 9. Appendix If there is no picture, or the picture is not displayed correctly.
Page 218 9. Appendix PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT COMPUTER 1 INPUT SELECT COMPUTER 2 INPUT SELECT COMPUTER 3 INPUT SELECT HDMI INPUT SELECT DisplayPort INPUT SELECT VIDEO INPUT SELECT S-VIDEO INPUT SELECT VIEWER INPUT SELECT NETWORK PICTURE MUTE ON...
Page 219 9. Appendix Troubleshooting Check List Frequency of occurrence always sometimes (How often?_____________________) other (__________________) Power No power (POWER indicator does not light blue) See also “Status Shut down during operation. Indicator (STATUS)”. Power cord’s plug is fully inserted into the wall outlet. Power cord’s plug is fully inserted into the wall outlet.
Page 220 Notebook PC / Desktop Native resolution: Refresh rate: Video adapter: Other: Projector DVD player VCR, DVD player, Video camera, Video game or other NEC standard or other manufacturer’s cable? Manufacturer: Model number: Length: inch/m Model number: Distribution ampliﬁer Model number: Switcher...

This manual is also suitable for:

Pa621x Pa671w Pa621u Pa571w Pa521u Pa722x ... Show all

NEC PA721X User Manual

Quick Links

Related Manuals for NEC PA721X

Summary of Contents for NEC PA721X

This manual is also suitable for: