Related Manuals for Sony UPA-PC110
Summary of Contents for Sony UPA-PC110
- Page 1 3-206-324-11(1) Digital Photo System Operating Instructions Version 1.00 UPA-PC110 © 2001 Sony Corporation...
- Page 2 English Owner’s Record The model and serial numbers are located in the rear. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture.
-
Page 3: Table Of Contents
Table of Contents Overview ................4 Important Features ..............4 Operating Instructions ............. 4 Accessory Check List ............5 Parts and Controls ............6 Front View ................6 Back View ................7 Connections ............... 8 Connecting the Power Cord ............ 8 Connecting Peripheral Devices ..........8 Starting Up and Shutting Down ........ -
Page 4: Overview
Memory Stick, CompactFlash, and • Memory Stick and MagicGate Memory Stick are SmartMedia. Digital images can also be read from trademarks of Sony Corporation. storage media commonly used with computers: floppy • CompactFlash is a trademark of SanDisk disks, PC cards, and CD-ROMs. -
Page 5: Accessory Check List
Accessory Check List Make sure that you have everything. • Power cord • SCSI cable • Operating Instructions 1 (this manual) • CD eject pin Note Save the box and packing material. Do not discard these items. You may need them again to pack the printer for moving or shipping to another location. -
Page 6: Parts And Controls
Parts and Controls Parts and Controls Front View Operation panel User interface COMPACT FLASH panel PC CARD MEMORY STICK SMART MEDIA FLOPPY DISK 1 Power lamp Note Lights green with the power to the operation panel is When you adjust the angle, be careful to avoid switched on. -
Page 7: Back View
Note 9 Speaker To avoid loss of image data or damage to the main A sound is emitted when you touch the display. unit, never attempt to mount a Memory Stick, Compact Flash card, Smart Media card, or SD card by inserting it in a PC card type adapter setting it into the PC card slot. -
Page 8: Connections
For details about compatible printers, Connect the provided power cord to the AC power contact a Sony Authorized Dealer. For details about connector on the back of the unit, and then connect the how to connect the printer for receipts, refer to the plug to a power outlet. - Page 9 Follow the procedure below to connect peripheral device equipped with an SCSI interface to the unit. AC IN SCSI PARALLEL RS-232C To the SCSI connector SCSI cable (provided) SCSI device Note • Make sure that the connector of the SCSI cable is inserted completely into the back of the unit.
-
Page 10: Starting Up And Shutting Down
Starting Up and Shutting Down Starting Up and Shutting Down Starting Up Shutting Down Make sure that the peripheral devices are switched Terminate software on the main unit as explained on, and then switch on the main switch at the user in the instructions provided with the software. -
Page 11: Setting Media
Setting Media A variety of media listed below can be set in the drives Using a CompactFlash Card and slots provided on the user interface panel to read image data stored on these media. With the v mark on the CompactFlash card facing •... -
Page 12: Using A Smartmedia Card
Setting Media Note Using a SmartMedia Card Push the PC card in completely. If the PC card is not inserted completely, you may not be able to With the terminals on the SmartMedia card facing read image data stored on the card. up, insert the card completely into the lower part of the slot. -
Page 13: Using A Cd-Rom Or Cd-R
When the message prompts you to remove the While supporting the bottom of the tray with your media, press the eject button 1 , and then pull the hand, center and set the disc on the tray and then floppy disk from the drive 2 . press down gently until you hear it click and lock in place. - Page 14 Setting Media Removing a CD-ROM or CD-R When CD-R access is completed , the CD-R drive tray opens automatically. Pull the tray out. With one finger pressing down gently on the spool of the tray, lift the disc off the tray. Gently push the tray into the unit until it locks in place.
-
Page 15: Appendix
Appendix Condensation Precautions If the unit is brought directly from a cold location to a warm one or is placed in an extremely warm or humid room, water droplets may form inside the unit. (This is On safety called “condensation.”) Using this unit in this condition could cause it to operate incorrectly or even •... - Page 16 Appendix Write-protecting Memory Stick data Restrictions on duplication In order to protect important data from accidental erasure, the Memory Stick has a write-protect switch. Pay special attention to the following when using this When the switch is in the lefthand position, data can be unit to copy or duplicate material: written to or deleted from the Memory Stick, and the •...
- Page 17 Write-protecting SmartMedia data Notes on Using Media In order to protect important data from accidental • Before using any data storage media, be sure to erasure, a SmartMedia card can be write-protected to carefully read its user manual. prevent data from being written. •...
-
Page 18: Troubleshooting
Troubleshooting Unit does not operation Before sending the unit out for servicing, check the items listed below. If you still cannot solve the problem, contact your Sony Authorized dealer. Problem Cause/Remedy Power does not switch on (Power lamp does not light). - Page 19 Problem Cause/Remedy c Check all SCSI devices to confirm that they have been switched on. A SCSI device connected to the main unit does not operate. Refer to the instructions provided with the SCSI device. Always switch on all SCSI devices before you switch on the main unit.
- Page 20 Appendix Message Meaning/Solutions c The ink ribbon loaded in the printer exceeded the specified number of prints. RIBBON END Load the allowed number of sheets in the printer and install a new ink ribbon. c The ink ribbon loaded in the printer exceeded the specified number of prints during printing.
- Page 21 Message Meaning/Solutions FLS_ERR: XX YY ZZ c An abnormal condition in the film scanner caused a coded error message (XX YY ZZ) to appear. Switch the unit and film scanner off, then switch them on again. c An internal communication error occurred inside the unit. HAERR Touch the [Retry] button to continue the scanning job.
- Page 22 Appendix Other Messages Message Meaning/Solutions Failed. (Error Code) c Write operation to the CD-R failed. Insert a new CD-R then touch the [Retry] button to continue the operation. Unable to initialise. Please insert another new CD. c A used CD-R was inserted for the write operation. Insert an unused CD-R.
-
Page 23: Specifications
Specifications Power supply 100-120V- 50/60Hz Current consumption 1.2A Operating temperature 5 ˚C to 35 ˚C (41 ˚F to 95 ˚F) 336 × 360 × 417 mm (WHD) Dimensions 224 mm with display closed. Weight (main unit only) 14 kg (30.8 lb.) Display 12.1 in. - Page 24 Sony Corporation Printed in Japan...