Table of Contents Features ..............3 Display of the Power Save Setting (POWER SAVE) ..........15 Parts Identification ........... 4 Display of Accumulated Battery Use Time Preparation ..............5 (TIME) ............... 15 Attaching to a Camcorder ........5 Display of the +48V Power Setting (+48V) ..15 Using the DWA-01D/F01D Wireless Adapter ..
Rear mounting to camcorders Features The DWR-S02DN can be rear-mounted to a range of Sony professional camcorders - using the DWA-01D/F01D wireless adapter. When used with a camcorder that has AES/EBU inputs, full-digital audio recording is also The DWR-S02DN digital wireless receiver is a slot-in type wireless receiver capable of receiving two channels from possible.
For details on encryption key exchange, see “Using the Parts Identification Encrypted Transmission Function” on page 8. g RF (radio frequency) indicators Indicate the RF input level of tuner 1 and tuner 2. The indicators that light up depend on the RF squelch function setting as follows: When the RF (radio frequency) squelch level is set to OFF:...
Note If the camcorder is not compatible with the receiver, the compatibility pin on the receiver will make it impossible to insert the receiver into the slot. For details on compatible camcorders, consult a Sony sales representative.
Set the frequency band (BAND), group (GP), and channel (CH) as follows. For details on the groups and channels included in each frequency band, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD- ROM. For details on menu operations, see “Basic Menu Operations”...
Note When you change the BAND/GP/CH setting on the If a Sony digital wireless frequency within the group is not receiver, you can send the BAND/GP/CH setting to the found by the second try, scanning is cancelled. transmitter that is paired with the receiver.
This receiver is capable of receiving scrambled signals from Sony digital wireless transmitters. This function prevents hacking of the signal. To use this function, select one of the following encrypted transmission modes:...
When the RF REMOTE function is off, REMOTE On the transmitter, set the same password that was set cannot be selected. on the receiver. When you select USB: For details on transmitter operations, refer to the Connect the transmitter to the receiver using a USB operating instructions supplied with the transmitter.
Using a USB Keyboard Menu Displays and Detailed Settings Connecting an optional USB keyboard to the receiver allows you to perform menu operations and enter your password for the encrypted transmission function from the Menu Structure and Hierarchy keyboard. A Micro USB connector is used on the receiver. Use the USB adapter cable supplied with the transmitter to connect Menu structure the keyboard.
Menu hierarchy Basic Menu Operations MENU SELECT UTILITY Meter indication Menu name Function name AES/EBU LVL@MIC SYNC SOURCE WORD SYNC 75ohm ANALOG OUTPUT 1 TIME Item to be set BRIGHTNESS DIMMER MODE Press the MENU SELECT button repeatedly to select FACTORY PRESET the menu.
DWA-01D/F01D wireless adapter. The OFF: 75-ohm termination is not added. function does not operate even when used with a Note compatible Sony slot-in type camcorder. When the receiver is turned off, the termination is released. Selecting the AES/EBU Output Selecting Output 1...
Displaying the Software Version For details on the groups and channels included in each (VERSION) frequency band, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD- The version of the receiver software can be displayed. ROM.
This function disables the audio when the RF signal becomes weak and the sound quality deteriorates. This Display of the Audio Signal Delay prevents interference from a nearby Sony digital wireless transmitter set at the same frequency. Time (SYSTEM DELAY) 20 dBµ: Sets the squelch level to 20 dBµ.
Display of the Power Save Setting Operations” on page 11. (POWER SAVE) The Sony digital wireless transmitter sends not only digital The power save setting of the transmitter is displayed. audio signals, but also various other information (metadata) related to transmitter settings.
If the receiving channel (CH) configured on the receiver is proper functioning. For details on software updates, a channel for which use with the wireless remote control contact your Sony service representative. function is restricted on the transmitter side, the UNMATCH screen appears.
• +48V setting Changing the Settings on • Audio codec mode setting the Transmitter For details on the transmitter settings, see “Changing the Settings on the Transmitter” on page 17. Cancelling the Cross Remote For details on menu operation, see “Basic Menu Operations”...
Audio Input Level Setting (INPUT LEVEL) When the input of the transmitter is set to MIC, the value of the attenuator can be changed. The attenuator values that can be selected depend on the transmitter function. Low-cut Filter Setting (LCF) The low-cut filter setting of the transmitter can be changed.
Block Diagram Antenna a Tuner 1 Analog Digital Tuner 2 wireless tuner 1 Tuner 1+2 Sync Compressor Digital Antenna b interface Camcorder interface Digital wireless tuner 2 Analog Sync Terminate 75 ohms...
Two or more transmitters are set to the same It is not possible to use two or more transmitters that channel. are set to the same channel. Refer to the Sony digital wireless frequency lists and reset the transmitter channel.
Page 21
(see page 22). If it is not suitable, software update is necessary. Contact your Sony service representative. The USB keyboard You are using a USB keyboard that is not Check the conditions for using a USB keyboard with does not work.
The use of portable telephones and other communication devices near the DWR-S02DN may result in malfunction and interference with audio signals. It is recommended that On Cleaning portable communication devices near the DWR-S02DN be turned off.
WARRANTY, OR FOR ANY OTHER REASON MODE3: 2.8 msec WHATSOEVER. Digital connection with a • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY camcorder KIND MADE BY USERS OF THIS UNIT OR MADE BY MODE1: 1.9 msec THIRD PARTIES.