Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15) Operating Instructions Manual
Projectors: bravia home theater lcd projector
Hide thumbs
Also See for VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15):
- Specification sheet (2 pages) ,
- Specifications (2 pages) ,
- Operating instructions manual (77 pages)
Related Manuals for Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15)
Summary of Contents for Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15)
- Page 1 3-198-141-11 (1) Video Projector Operating Instructions VPL-AW15 VPL-AW10 © 2007 Sony Corporation...
- Page 2 For customers in the USA If you have any questions about this product, you may call: Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/ The number below is for FCC related matters only. Declaration of Conformity Trade Name: SONY Model No.: VPL-AW15, VPL-AW10...
- Page 3 For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org). Trademark Information “BRAVIA” and are trademarks of Sony Corporation. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
- Page 4 For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. Voor de klanten in Nederland Gooi de batterij niet weg maar lever deze in als klein chemisch afval (KCA). The socket-outlet should be installed near the equipment and be easily accessible. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT...
-
Page 5: Table Of Contents
Table of Contents Precautions ... 7 Checking the model name of the projector ...7 Location of Controls Front/Side ...8 Rear/Bottom ...9 Remote Control ...10 Connections and Preparations Unpacking ...11 Step 1: Installing the Projector ...12 Before Setting Up the Projector ...12 Positioning the Projector and a screen ...14 Step 2: Connecting the Projector ...17... - Page 6 Others Troubleshooting ... 51 Warning Indicators ... 53 Message Lists ... 54 Replacing the Lamp and the Air Filter and cleaning the Ventilation holes (intake) ... 55 Replacing the Air Filter ... 58 Fitting the lens cap ... 58 Specifications ... 59 Preset Signals ...
-
Page 7: Precautions
Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. -
Page 8: Location Of Controls
Location of Controls Front/Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. LAMP/COVER indicator (1 page 53) (On/standby) switch (1 page 22) INPUT button (1 page 27) MENU button (1 page 36) (1 page 36) Ventilation holes... -
Page 9: Rear/Bottom
Rear/Bottom Ventilation holes (exhaust) (1 page 13) REMOTE connector Connects to a computer, etc. for remote control S VIDEO INPUT connector (mini DIN 4-pin)/ VIDEO INPUT connector (phono type) (1 page 19) Ventilation holes (intake) (1 page 13) Lamp cover (1 page 56) (phono type) (1 page 17) INPUT A connector (1 page 20) -
Page 10: Remote Control
Remote Control LIGHT button Illuminates the buttons on the remote control. INPUT button (1 page 27) FREEZE button (1 page 35) MENU button (1 page 36) WIDE MODE button (1 page 28) PICTURE MODE buttons (1 page 31) Infrared transmitter (On/standby) switch (1 page 22) PIC MUTING button... -
Page 11: Connections And Preparations
Connections and Preparations This section describes how to install the projector and screen, how to connect the equipment from which you want to project the picture, etc. Unpacking Check the carton to make sure it contains the following items: • Remote control (1) and Size AA (R6) batteries (2) •... -
Page 12: Step 1: Installing The Projector
Step 1: Installing the Projector The projector displays pictures output from a VCR or other devices. The projector can be used in various places and you can enjoy viewing beautiful pictures easily. Before Setting Up the Projector Unsuitable installation Do not place the projector in the following situations, which may cause malfunction or damage to the projector. - Page 13 Improper use Do not do any of the following while using the projector. Blocking the ventilation holes. Ventilation holes (intake) For details on the location of the ventilation holes (intake or exhaust), see “Location of Controls” on pages 8 to 9. Tilting front/rear and left/right 15°...
-
Page 14: Positioning The Projector And A
Positioning the Projector and a screen The installation distance between the projector and a screen varies depending on the size of the screen. Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector with the center of the lens within the areas indicated in the gray areas in the illustration (VPL-AW15 only). - Page 15 When using the 16:9 aspect ratio screen Screen size (inches) (mm) 1016 1524 1778 1151 1750 2049 (minimum) (69) 1885 2849 3332 (maximum) (112 (131 To calculate the installation measurements (SS: Screen Size) a (minimum) = 29.909 (1 ) × SS – 44.886 (1 b (maximum) = 48.239 (1 ) ×...
- Page 16 Position the projector so that the lens is parallel to the screen. Top view Screen Project an image on the screen and adjust the picture so that it fits the screen. (1 page 21) To project an image, connect video equipment to the projector. (1 page 17) Note When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the projector or the zooming magnifications.
-
Page 17: Step 2: Connecting The Projector
Step 2: Connecting the Projector When making connections, be sure to do the following: • Turn off all equipments before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. - Page 18 To connect to a DVD player/recorder and Blu-ray Disc player equipped with HDMI output You can enjoy better picture quality by connecting a DVD player/recorder and Blu-ray Disc player equipped with HDMI output to the HDMI input of the projector. Rear of the projector : Video signal flow This projector supports PC display input that has been available since Ver.1.2a of HDMI standards.
- Page 19 To connect to a VCR equipped with the S video connector or video connector You can connect a DVD player/recorder, hard disk video recorder, VCR or laser disk player, which is not equipped with component video connectors. See also the instruction manual of each equipment.
-
Page 20: Connecting To A Computer
Connecting to a Computer Rear of the projector HD-Dsub15 pin cable (optional) or HDMI cable (optional) : Video signal flow Set “Input-A Signal Sel.” in the Setup not appear properly, set it to “Computer.” (1 page 47, 54) Note If you set your computer, such as a notebook type, to output the signal to both computer’s display and this equipment, the picture of the equipment may not appear properly. -
Page 21: Step 3: Adjusting The Picture Position
Step 3: Adjusting the Picture Position Project an image on the screen and then adjust the picture position. LENS SHIFT dials (VPL-AW15 only) Remote control detector (On/standby), INPUT, MENU, and projector function the same as those on the remote control. Note Depending on the installation location of the projector, you may not control it with the remote control. - Page 22 Flashes in green for a few seconds, and then lights in green. (VPL-AW15 only) To adjust the horizontal position To adjust the vertical position Press the (On/standby) switch to turn on the projector. (On/standby) indicator flashes in green, and then lights in green.
-
Page 23: To Adjust The Horizontal Position
To adjust the horizontal position Turn the LENS SHIFT dial right or left. The picture projected on the screen moves right or left by a maximum of 25% of the screen size from the center of the lens. 1 screen width To adjust the vertical position Turn the LENS SHIFT dial up or down. - Page 24 Zoom lever Focus ring To adjust the tilt of the installation surface If the projector is installed on an uneven surface, use the adjusters to keep the projector level. Note Be careful not to catch your finger when turning the adjusters. Adjust the picture size using the zoom lever.
-
Page 25: Step 4: Selecting The Menu Language
Step 4: Selecting the Menu Language You can select one of 16 languages for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. 2, 3, 4 Press MENU. - Page 26 Press M/m to select the Setup menu, and press , or The setting items of the selected menu appears. Press M/m to select “Language,” and press , or Press M/m/</, to select a language, and press The menu changes to the selected language.
-
Page 27: Projecting
Projecting This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste. Projecting the Picture on the Screen Example: To view the picture from the video equipment connected... -
Page 28: Turning Off The Power
Turning Off the Power Press the (On/standby) switch. A message “POWER OFF?” appears on the screen. Press the (On/standby) switch again before the message disappears. (On/standby) indicator flashes in green and the fan continues to run to reduce the internal heat. First, the not be able to light up the Confirm that the fan stops running and the lights in red. - Page 29 Original image When the Wide Mode is operated Squeezed Letterbox picture with side panels Letterbox picture Wide Zoom A 4:3 aspect ratio picture is enlarged over the entire screen properly. The upper and lower portions of the screen are slightly cut off.
- Page 30 Note You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the Screen menu only when “Zoom” is selected. (1 page 45) Notes on selecting the wide screen mode The projector is featured with the WIDE MODE. When changing the settings of WIDE MODE, it must be noted as below.
-
Page 31: Selecting The Picture Viewing Mode
Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of program or room conditions. PICTURE MODE buttons DYNAMIC STANDARD CINEMA USER 1, USER 2 and USER 3 * RCP button: VPL-AW15 only Press one of the PICTURE MODE buttons (DYNAMIC, STANDARD,... -
Page 32: Adjusting The Picture Quality
Adjusting the Picture Quality You can adjust the picture quality that suits your taste by selecting the adjustment items with the remote control. The adjusted data can be stored in each picture mode. ADJ PIC button * RCP button: VPL-AW15 only Example: To adjust the contrast Press ADJ PIC. -
Page 33: Adjusting The Picture Using Real Color Processing (Vpl-Aw15 Only)
Adjusting the Picture Using Real Color Processing (VPL-AW15 only) The Real Color Processing (RCP) feature allows you to adjust the color and hue of each target of the projected picture you specify independently. You can thus obtain a picture more suitable to your taste. Freeze the scene of the video source when you are adjusting the picture using Real Color Processing. - Page 34 2 Press to select “Position” or “Range,” and specify it more delicate color position and color range you want to adjust using < Adjust the color of the specified portions. Press to select “RCP Color” or “RCP Hue,” then adjust the color or hue of the portions selected in step 3 to suit your taste using <...
-
Page 35: Using Other Functions
Using Other Functions You can temporarily turn off or pause a projected picture. PIC MUTING button FREEZE button Press PIC MUTING. Press to temporarily turn off a projected picture. To return to the previous screen, press PIC MUTING again. Press FREEZE. A projected picture can be paused to be displayed. -
Page 36: Using The Menus
Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus The projector is equipped with an on-screen menu for making various adjustments and settings. Some of the adjustable/setting items are displayed in a pop-up menu, in a setting menu or adjustment menu with no main menu, or in the next menu window. - Page 37 Press MENU. The menu window appears. Press M/m to select a menu item, and press , or The items that can be set or adjusted with the selected menu appear. The item presently selected is shown in yellow.
- Page 38 Pop-up menu Setting items Setting menu Adjustment menu Next menu window Setting items (Menu window of VPL-AW15) Press M/m to select an item you want to set or adjust and press , or The items that can be set appear in the pop-up menu, setting menu, adjustment menu, or in the next menu window.
- Page 39 Make the setting or adjustment of an item. When changing the adjustment level To increase the value, press M/,. To decrease the value, press m/<. Press to restore the previous screen. When changing the setting Press M/m to change the setting. Press to restore the previous screen.
-
Page 40: Picture Menu
Picture Menu The Picture menu is used for adjusting the picture. Picture Mode You can select the picture viewing mode that best suits the type of picture or the environment. Dynamic: Select this for enhanced picture contrast and sharpness to reproduce color tones. - Page 41 Cinema Black Pro Advanced Iris Switches the iris function during projection. VPL-AW15 Auto 1: .Automatically switches to an optimum iris according to a projected scene. The contrast of the scene is emphasized most. Auto 2: An optimum iris becomes smaller than when set to “Auto 1”. The contrast of the scene becomes reduced.
- Page 42 Sharpness Sharpens the outline of the picture, or reduces the noise. The higher the setting, the sharper the picture. The lower the setting, the softer the picture, thus reducing the noise. NR (Noise Reduction) Reduces the roughness or noise of the picture. Usually, select “Off”.
-
Page 43: Advanced Picture Menu (Vpl-Aw15 Only)
Advanced Picture Menu (VPL-AW15 only) The Advanced Picture is used for adjusting the picture more. RCP (Real Color You can adjust the color and hue of each selected portion of the Processing) picture independently. (VPL-AW15 only) User 1, User 2, User 3: You can adjust the picture using Real Color Processing and store the settings. -
Page 44: Screen Menu
Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc. Wide Mode (When the You can set the aspect ratio of the picture to be displayed for the input signal is moving current input signal. - Page 45 Screen Area Selects the size of the picture when a Hi-Vision picture is overscanned. Full: Expands the picture on the whole of the screen. Through: Does not expands the picture on the whole of the screen. Note This item is effective only when a Hi-Vision signal (preset memory No. 10 and 11) is input and “On”...
-
Page 46: Setup Menu
Setup Menu The Setup menu is used to change the factory preset settings, etc. Status Sets whether or not the on-screen display is displayed. Set to “Off” to turn off the on-screen displays except for the menus, message when turning off the power, and warning messages. Language Selects the language used in the menu and on-screen displays. - Page 47 Input-A Signal Sel. Selects the type of signal input from the equipment connected to the INPUT A connector. Selects the type of signal input from the equipment by selecting “Input-A” with the INPUT. Auto: Selects the input signal type automatically. Computer: Inputs the signal from a computer.
-
Page 48: Function Menu
Function Menu The Function menu is used for changing the settings of the various functions of the projector. Smart APA With this item set to On, the APA function works automatically for a signal input from a computer so that the picture can be seen clearly. -
Page 49: Installation Menu
Installation Menu The Installation menu is used for changing the installation settings. V Keystone Corrects the vertical trapezoidal distortion of the picture. When the bottom of the trapezoid is longer than the top ( When the top of the trapezoid is longer than the bottom ( Note Depending on the picture position adjusted with the lens shift feature, the aspect ratio of the picture may change from the original... -
Page 50: Information Menu
Information Menu The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. Model Name Displays the model name (VPL-AW15 or VPL-AW10) and the serial number. -
Page 51: Troubleshooting
This section describes how to solve the problems, how to replace the lamp and air filter, etc. Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy The power is not turned on. - Page 52 2 hours with the power on. properly. (1 page 45) menu to “On.” (1 page 46) (On/standby) indicator should light in green. purchase. Consult with your local dealer or qualified Sony personnel. (1 page 11) projector may work improperly or inadvertently.
-
Page 53: Warning Indicators
Disconnect the AC power cord, then confirm the (On/standby) flashes in red. (A repetition rate of 6 flashes) Note When a warning indicator other than the above status, consult with Sony Customer Information Service Center. LAMP/COVER indicator (On/standby) indicator (1 page 56) lamp. -
Page 54: Message Lists
Message Lists Warning messages Message Cause and Remedy c Turn off the power. High temp.! Lamp off in 1 min. c Check to ensure that nothing is blocking the ventilation holes. c Frequency is out of range. Input a signal that is within the Frequency is out of range! c Set “Input-A Signal Sel.”... -
Page 55: Replacing The Lamp And The Air Filter And Cleaning The Ventilation Holes (Intake)
Replacing the Lamp and the Air Filter and cleaning the Ventilation holes (intake) Tools you need to get started: Standard Phillips screwdriver Cloth (for scratch protection) The lamp used for the light source has a certain lifespan. When the lamp dims, the color balance of the picture becomes strange, or “Please replace the Lamp/Filter.”... - Page 56 Loosen the three screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 3 screws.
- Page 57 Place a new air filter. Note After removing the air filter, do not touch the fan inside the projector. Attach the air filter cover. Wipe dust off the Ventilation holes (intake) with a soft cloth. Ventilation holes (intake) Note The projector will not turn on unless the air filter cover is securely closed.
-
Page 58: Replacing The Air Filter
Replacing the Air Filter When “Please replace the filter.” appears on the screen, you should replace the air filter. The air filter should be replaced every 1,500 hours. This value varies depending on the environment or how the projector is used. 1,500 hours are approximate. -
Page 59: Specifications
Specifications System Projection system 3LCD panel, 1 lens, 3 primary color LCD shutter projection system LCD panel 0.73-inch (18.5 mm) TFT LCD panel 2,764,800 pixels (921,600 pixels × 3) Lens 1.6 times zoom lens (manual) f=21.3 to 34.1 mm/F2.4 to 3.1 Lamp 165 W Ultra High Pressure Lamp Projection picture size... - Page 60 Supplied accessories Remote control RM-PJAW15 (1) (VPL-AW15 only) RM-PJAW10 (1) (VPL-AW10 only) Size AA (R6) batteries (2) AC power cord (1) Air filter (for replacement) (1) Lens Cap (1) Operating Instructions (1) Design and specifications are subject to change without notice. Optional accessories Projector Lamp LMP-H160 (for replacement) Projector Suspension Support PSS-H10, PSS-610...
-
Page 61: Preset Signals
Warning on power connection Use a proper power cord for your local power supply. The United States, Canada Plug type YP-3 Female end YC-13 Cord type Rated Voltage 10A/125V & Current Safety approval UL/CSA * Use a rated plug that complies with the regulation of each country/region and the specifications. Preset Signals The following table shows the signals and video formats which you can project using this unit. - Page 62 Memory Preset signal (Resolution) 1080/24PsF 1080/48i (1920 × 1080i) 720/60p 720/60p (1280 × 720p) 720/50p 720/50p (1280 × 720p) 1080/60p 1080/60p (1920 × 1080p) 1080/50p 1080/50p (1920 × 1080p) 1080/24p 1080/24p (1920 × 1080p) 640 × 350 VGA-1 (VGA350) 31.469 VESA 85 (VGA350) 640 ×...
- Page 63 Memory Preset signal (Resolution) 1400 × 1050 SXGA + 1280 × 768 1280 × 768/60 1280 × 720 1280 × 720/60 Preset memory numbers for each input signal Analog signal Signal Video signal (VIDEO INPUT and S VIDEO INPUT connectors) Component signal (INPUT A and Y P connectors) Video GBR signal (INPUT A connector)
-
Page 64: Input Signals And Adjustable/Setting Items
Input Signals and Adjustable/Setting Items Some of the items in the menus cannot be adjusted depending on the input signal. The following tables indicate them. The items that cannot be adjusted are not displayed in the menu. Item Video or S-Video (Y/C) Advanced Iris Lamp Control... - Page 65 Screen menu Item Video or S-Video (Y/C) Wide Mode Over Scan – Screen Area * – V Position* V Size* – Phase – Pitch – Shift – z : Adjustable/can be set – : Not adjustable/cannot be set : This item is effective only when “Over Scan” is set to “On” in the Screen be set at preset signal 1920 ×...
-
Page 66: Ceiling Installation
Ceiling Installation Use the PSS-H10 or PSS-610 Projector Suspension Support when you install the projector on a ceiling. The projection distances for ceiling installation are shown below. When Using the PSS-H10 Projector Suspension Support a: Distance between the screen and the installation hole at the ceiling side of the ceiling mount unit (front side) x: Distance between the ceiling and the center of the screen such that the picture will not be truncated or blocked... - Page 67 When using the 16:9 aspect ratio screen Screen Size (inches) (mm) 1016 1524 1778 a Minimum 1266 1864 2163 Distance Maximum 1999 2964 3446 Distance (116 (135 x Minimum Distance Maximum Distance To calculate the installation measurements (SS: Screen Size) a (minimum) = 29.909 (1 ) ×...
- Page 68 For details on installation on a ceiling, refer to the Installation manual for Dealers of the PSS-H10. Make sure to consult with a qualified Sony personnel for installation. The installation measurements are shown below when installing the projector on a ceiling using the PSS-H10.
- Page 69 Front view 63.5 (2 ) (VPL-AW15) 68 (2 ) (VPL-AW10) Side view Center of the lens Front of the cabinet Ceiling Center of the supporting pole The bottom surface of the mount bracket Center of the lens (VPL-AW15 only)
-
Page 70: Suspension Support
When Using the PSS-610 Projector Suspension Support a: Distance between the screen and the installation hole of the upper ceiling mount bracket (front side) b: Distance from the ceiling to the bottom surface of the unit x: Distance between the ceiling and the center of the screen such that the picture will not be truncated or blocked Center of the screen When using the 16:9 aspect ratio screen... -
Page 71: Top View
For details on installation on a ceiling, refer to the Installation manual for Dealers of the PSS-610. Make sure to consult with a qualified Sony personnel for installation. The installation measurements are shown below when installing the projector on a ceiling using the PSS-610. -
Page 72: Front View
Front view Distance between the ceiling and the surface of the mount bracket Using adjustment pipe (b): 150/175/200 mm (6 / 7 / 7 Using adjustment pipe (c): 250/275/300 mm (9 63.5 (2 ) (VPL-AW15) 68 (2 ) (VPL-AW10) Side view Center of the lens Front of the cabinet inches) -
Page 73: Index
Index Adjust Signal Phase ...45 Pitch ...45 Shift ...45 Adjuster ...24 Adjusting picture position ...21 picture quality ...32 Advanced Iris ...41 Auto Input Search ...48 Background ...48 Black Level Adj..42 Blanking ...49 Brightness ...41 Ceiling Installation ...66 Cinema Black Pro ...41 Color System ...47 Color Temp. - Page 74 Screen Area ... 45 Selecting the menu language ... 25 Sharpness ... 41 Specifications ... 59 Standby Mode ... 46 Status ... 46 Supplied accessories ... 11 Troubleshooting ... 51 V Keystone ... 49 WIDE MODE ... 28 Wide Mode Full ...
- Page 76 Printed on 70% or more recycled paper. Standby power consumption 0.5 W Halogenated flame retardants are not used in cabinets and printed wiring boards. Uses 50% recycled styrene foam for the packaging cushions. Sony Corporation Printed in Japan...