Page 1
Before operating the unit, please read this manual thoroughly and retain it for future reference. Note The supplied CD-ROM includes operating instructions for the SRP-X700P Digital Powered Mixer (English, Japanese, French, German, Spanish, Italian and Chinese versions). SRP-X700P Ver. 1.2...
Page 2
The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SRP-X700P Serial No. _______________...
SRP-X700P and also the basic operations (playback, stop, fast forward, rewind, etc.) of a Sony DVD, VCR, CD and MD. The other is SRP-X700P Manager, which enables you to perform internal settings of the SRP-X700P.
POWER button of the SRP-X700P. Turning on the POWER button of the SRP-X700P, sets the AV equipment connected to the CONTROL S OUT terminals 1 through 4, to power-on state. Note that the AV equipment does not enter the power standby state when the POWER button of the SRP-X700P is turned off.
SCENE RECALL button You can recall the scene memories A to D. Use the SRP-X700P Manager to assign the scenes to the scene memories A to D. By default, the scene memory A is assigned to scene No. 1, the scene memory B is assigned to scene No.
As to the video input signals, the combination of composite signal and S video signal or the combination of component signal and RGB signal is selected by the SRP-X700P Manager for each channel. • 4A, 4B and 4C input terminals The video input terminals for accepting the composite and S video signals, and the stereo audio input terminal.
Page 7
User Control Panel. You can perform the basic operations of Sony DVD, VCR, CD, MD and CD-R audio, such as playback, stop, fast forward and rewind. You can select either the wired connection or the wireless connection for each terminal from the SRP-X700P Manager.
CAUTION To prevent breakdown or injury, do not put your hand inside of the slot. Please refer to the table Sony 800 MHz-band system models frequency range in the Operating Manual of Wireless Microphone or Transmitter. 1 GP (group) button To change the group, press the + or –...
How to Control the SRP-X700P from External Equipment Note The USB terminal and the REMOTE USB terminal are the dedicated terminal to control this unit from the SRP-X700P Manager and User Control Panel. REMOTE RS-232C Terminal Use of this terminal enables you to control the SRP-X700P from an external controller.
How to Control the SRP-X700P from External Equipment REMOTE PARALLEL Terminal The REMOTE PARALLEL terminal enables the SRP-X700P to be remotely controlled with a simple circuit connected externally to this terminal. Terminal shape : D-sub 25-pin, female Recommended cable : Multi-core shielded cable for data...
VM-50 • Operate the SRP-X700P Manager or the User Control Panel to confirm that it can control the Sony equipment. If they cannot control the equipment, change position of the supplied IR transmitter VM-50 until they can control the equipment.
System Configuration System example when operating the SRP-X700P from the REMOTE PARALLEL terminal The REMOTE PARALLEL terminal of the SRP-X700P is shipped from the factory with the default setting on the premise of the external operation panel as described below. Camera...
Default settings INPUT Item MIC1 - MIC4 TRIM MIC5/LINE1, MIC6/LINE2 LINE3, LINE4A - 4F MIC1 - MIC4 MIC5/LINE1, MIC6/LINE2 COMP MUTING GAIN LIMIT INPUT FADER Band 1 FREQ Band 2 MIC1 - MIC4 Band 3 MIC5/LINE1, Band 1 MIC6/LINE2 Band 2 Band 3 GAIN Band 1 - 3...
Page 16
Default settings OUTPUT Item OUTPUT1, OUTPUT2 REF LEVEL OUTPUT3 - OUTPUT8 REC OUT1, REC OUT2 DELAY MUTING GAIN LIMIT OUTPUT FADER Band 1 Band 2 Band 3 Band 4 Band 5 OUTPUT1, FREQ Band 6 OUTPUT2 Band 7 Band 8 Band 9 Band 10 Band 11...
Specifications AUDIO INPUT/OUTPUT Input Terminal shape MIC 1/WL 1, MIC 2/WL 2, XLR 3-31type Balanced MIC 3, MIC 4 MIC 5/LINE 1 XLR 3-31type Balanced MIC 6/LINE 2 LINE 3 Unbalanced LINE 4 (A B C F) Pin Unbalanced LINE 4 (D E) Unbalanced Output Terminal shape...
General Power requirement AC 120 V, 50/60 Hz Power consumption 150 W 482 × 132 × 350 mm (w/h/d) Dimensions (19 × 5 × 13 (excluding protrusions) Mass Approx. 13 kg (28 lb 11 oz) Operating temperature 0°C to 40°C Storage temperature –20°C to 60°C Supplied accessories...
Troubleshooting Before contacting us, please check the following again. If the trouble persists, please contact your local Sony Sales office or Dealer. Start the supplied software SRP-X700P Manager and check the settings of the SRP-X700P. Check the following if the problem still cannot be solved.