1. Select a suitable wireless receiver for the camcorder. Use Overview of Camcorders for Wireless as help Use Suggested Applications Packages as Guide Use Camcorder / Wireless Microphone Configuration Chart as a guide. Select wireless receiver and transmitter using Wireless Product overview as a guide 2.
Page 4
OVERVIEW OF CAMCORDERS FOR WIRELESS: Summary of Sony Camcorders and Wireless Capability: 1A. Sony Digital Camcorders with Built-in Wireless Slot (Camcorder as shipped See Page 5 of Wireless Guide for details) Camcorder Model DNW-7; DNW-9WS DNW-90; DNW-90WS DNV-5 1B. Sony Digital Camcorders with Built-in Wireless Slot (Camcorders retrofitted (w/QR-SDH) for Anton Bauer Ni-Cad Batteries) See Page 5 of Wireless Guide for details.
Page 5
See Page 9 of Wireless Guide for details Camcorder Model DSR-500WS; DSR-300 3A. Sony Analog Camcorders - BetacamSP (Camcorder as shipped w/NP-1 battery box , or retro fitted w/BP-90 battery box) See Page 7 of Wireless Guide for details Camcorder Model BVW-D600 / D-600WS BVW-400(A);...
Page 6
-Professional Camcorder/Wireless System Configuration Guide- The following is a comprehensive guide for setting up the right Sony wireless system with your camcorder. All configurations shown represent all current Sony professional camcorders and all current Sony wireless microphone models. Here are a few easy steps to configuring the proper system.
WRR-855A BTA-801 (ADAPTER) Transmitter The A8278-057-A bracket Is supplied with all Digital Betacam and HDW-700A camcorders, as well as with the Optional BKW-L601 SONY Fig.2 DNW-9WS, shown with WRR-855A in same configuration (installed-rear angle view) Fig.4 *SX camcorder shown with internally...
This configuration applies to the following models: Digital Betacam: Has Integrated Li-Ion Battery Mount (V- mount) (Supplied w/ A8278-057-A bracket) Option: DC-L1 and DC-L90 Sony NiCad Box w/ V-wedge Mounts Option: Anton Bauer QR-SDH Battery Mount w/ ABWMKKIT wireless adapter plate...
Fig. 8 WRR-855A inserted into BTA-801 adapter and mounted to a BVW-600WS via the NP-1 battery box. Power is provided via a 4-pin DC connector on camcorder (cable supplied with BTA- 801). A WRR-810A or WRR-805A may also be mounted to the NP-1.
Fig. 13 Balanced mic/line inputs 1 & 2 (left) and 4-pin DC connector (right) on back of DSR-500 camcorder. Standard connectors on all Broadcast model Sony camcorders BETACAM, BetaSP, Digital Beta, HDCAM, DV (located opposite side on some models). The ”4-hole” mount is used Fig.
Optional Mounting Hardware & Accessories A-8278-057-A Mounting Bracket. CA-WR855 Adapter. X-0248-167-1 Dual Mount Will mount 1 or 2 WRR-805As For mounting of any Sony UHF (screws supplied) to a camcorder supplied with an NP-1, DC-500 supplied hardware shown) to or an A-8278-057-A bracket. The clip on back of WRR-805A case camcorder models.
Converts almost any mic* to wireless operation Mic or line level (variable) 10mW/50mW RF output (switchable) 4 hrs continuous operation w/2 “AA” batteries Available on Channels 64/65, 66/67 & 68/69 *Works with: Any low-impedance XLR-balanced, non-phantom powered microphone or balanced, line-level source -12-...
Coordination Charts *A Note about Frequency Selection – Sony’s wireless systems operate across 6 TV channels (64-69). Each system operates across a single pair of these channels: 64 operates on 64 & 65; 66 operates on 66 & 67; and 68 operates on 68 & 69. Each of these systems is tunable to any of 47 frequencies on each TV channel.
Page 18
GROUP Channels 64/65 FREQUENCY 770.125 770.250 770.375 770.500 770.625 770.750 770.875 771.000 771.125 771.250 771.375 771.500 771.625 771.750 771.875 772.000 772.125 772.250 772.375 772.500 772.625 772.750 772.875 773.000 GROUP 11 GROUP 12 FREQUENCY 770.625 771.750 773.125 775.125 775.875 777.500 778.000 779.750 780.625 781.000...
Page 19
GROUP Channels 66/67 FREQUENCY 782.125 782.250 782.375 782.500 782.625 782.750 782.875 783.000 783.125 783.250 783.375 783.500 783.625 783.750 783.875 784.000 784.125 784.250 784.375 784.500 784.625 784.750 784.875 785.000 GROUP 11 GROUP 12 FREQUENCY 782.625 783.750 785.125 787.125 787.875 789.500 790.000 791.750 792.625 793.000...
Page 20
GROUP Channels 68/69 FREQUENCY 794.125 794.250 794.375 794.500 794.625 794.750 794.875 795.000 795.125 795.250 795.375 795.500 795.625 795.750 795.875 796.000 796.125 796.250 796.375 796.500 796.625 796.750 796.875 797.000 GROUP 11 GROUP 12 FREQUENCY 794.625 795.750 797.125 799.125 799.875 801.500 802.000 803.750 804.625 805.000...
OMNI LAVALIER MIC 1/8" MINPLUG TO PHONE PLU ADAPTER CABLE PHONE PLUG >SMC-9-4P ALL RACK-MOUNT TUNERS ADAPTER CABLE & DIVIDERS EXCEPT FOR WRR-800A/WRR-802A ALL SONY RACK-MOUNT WRR-805A, WRT-805A Rack-mount adapter kit WRR-800A, WRR-802A CARRYING CASE FREEDOM PACKAGED LIST PRICE $500.00 EQUIVELENT) $192.00...
Page 23
BTA-801, WRR-810A BTA-801, WRR-810A SCREWS FOR ABOVE (X2) BTA-801, WRR-810A ADAPTER PLATE-BOTTOM BTA-801, WRR-810A SCREWS FOR ABOVE (X2) WRR-805A DUAL CAMCORDER MOUNT ADAPTS BTA-801A & WRR- 810A TO ALL PROFESSIONAL CAMCORDERS SAD700 ADAPTER PLATE-TOP MOUNT MOUNT PLATE CAMCORDER MOUNTING BRACKET Stand Adapter for Handheld Wireless Microphones 2-540-028-01 7-682-547-09...
Page 26
2) **The WRR-855A with the CA-WR855 adapter works ONLY with the DSR-300 & 500(WS). The WRR-855A with no bracket or adapter, works ONLY with Betacam SX models (plug-in slot). Camcorder / Wireless Microphone Configuration Chart WRR-810A- 1/4 WAVE 1/8"...