hit counter script
Download
Share
Print this page
Cisco UCS B460 M4 Quick Start Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. UCS B460 M4
  6. Quick start manual
Cisco UCS B460 M4 Quick Start Manual

Cisco UCS B460 M4 Quick Start Manual

Hide thumbs Also See for UCS B460 M4:
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Contents
Introduction
Prerequisites
Requirements
Components Used
Background
Discovery Problems
Discovery Fails at 3% - Firmware Mismatch
Solution
Discovery Fails at 7% - CPU Mismatch
Solution
Introduction
This document describes two possible discovery failures that can occur when a B460 M4 motherboard is replaced and their respective solutions.
Prerequisites
Requirements
This document assumes knowledge of UCS B460 M4 and UCS Manager (UCSM).
Components Used
B460 M4 Blade Server
UCS Manager
Firmware 2.2(3b)
Background
The B460 M4 server consists of two Scalable M4 Blade Modules (B260 M4) and a Scalability Connector that cross-connects the two Blade Modules and
allows them to function as a single server. The Blade Module on the bottom is the "Master" and the Blade Module on the top is the "Slave."

Advertisement

loading

Related Manuals for Cisco UCS B460 M4

Summary of Contents for Cisco UCS B460 M4

  • Page 1 This document describes two possible discovery failures that can occur when a B460 M4 motherboard is replaced and their respective solutions. Prerequisites Requirements This document assumes knowledge of UCS B460 M4 and UCS Manager (UCSM). Components Used B460 M4 Blade Server UCS Manager Firmware 2.2(3b)
  • Page 2 Discovery Problems Discovery Fails at 3% - Firmware Mismatch In this failure scenario, the discovery fails at 3% with Remote Invocation Description Aggregate blade CIMC firmware version mismatch. Activate same firmware version on both CIMC as shown in the figure below. This can occur due to the replacement motherboard or blade module having a different firmware than the pre-existing B460 M4 server.
  • Page 3 Package-Vers: Update-Status: Ready Activate-Status: Startup-Vers: Backup-Vers: 2.2(3b) Bootloader-Vers: 2.2(3a).33 CIMC: Running-Vers: 2.2(3b) Package-Vers: 2.2(3b)B Update-Status: Ready Activate-Status: Ready Startup-Vers: 2.2(3b) Backup-Vers: 2.2(3b) Bootloader-Vers: 2.2(3b).33 Solution In order to recover from this, follow the steps below. 1) Navigate to Equipment > Chassis > Chassis # > Servers > Server # > Installed Firmware tab. 2) Right-click on the component that needs to be updated (e.g.
  • Page 4 changes to the correct firmware. Tip: The server administrator can monitor the update status from Equipment > Chassis > Chassis # > Servers > Server # > Inventory tab > CIMC tab > Update Status 5) Right-click on this same component and select Activate Firmware. Again, select the correct firmware, the Force checkbox and click Apply. 6) The Activate Status column in the Installed Firmware tab will change state and eventually return to Ready.
  • Page 5 UCS Manager (UCSM). The server administrator can also contact the Cisco Technical Assistance Center (TAC) for a workaround.