hit counter script
Sanyo PLC-XU300 Owner's Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLC-XU300
  6. Owner's manual

Sanyo PLC-XU300 Owner's Manual

Sanyo projector user manual
Hide thumbs Also See for PLC-XU300:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Manual
Multimedia Projector
PLC-XU300
MODEL
PLC-XU350
PLC-XU300K
PLC-XU350K
Owner's Manual
Network Supported
Wired LAN
❏
100-Base-TX/10-Base-T
Refer to the Owner's Manuals below for
details about network function.
Network Set-up and Operation
❏
PJ Network Manager
❏

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLC-XU300

Summary of Contents for Sanyo PLC-XU300

  • Page 1 Multimedia Projector PLC-XU300 MODEL PLC-XU350 PLC-XU300K PLC-XU350K Owner’s Manual Network Supported Wired LAN ❏ 100-Base-TX/10-Base-T Refer to the Owner's Manuals below for details about network function. Network Set-up and Operation ❏ PJ Network Manager ❏...

  • Page 2: Features And Design

    ✔ Note: • The On-Screen Menu and figures in this manual may differ slightly from the product. • The contents of this manual are subject to change without notice. ◆ Security Function The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control (p.54). PIN code lock function prevents unauthorized use of the projector (pp.19, 54–55). ◆ Helpful Maintenance Functions Lamp and filter maintenance functions provide for better and proper maintenance of the projector.

  • Page 3: Table Of Contents

    Safety Instructions . . . . . . . . . . . . . . . . . . . . .5 Air Circulation Installing the Projector in Proper Directions Moving the Projector Compliance .

  • Page 4: To The Owner

    50cm CAUTION DO NOT SET THE PROjECTOR IN GREASy, wET, OR SMOKy CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOwN OR A DISASTER . IF THE PROjECTOR COMES IN CONTACT wITH OIL OR CHEMICALS, IT MAy BECOME DETERIORATED .

  • Page 5: Safety Instructions

    Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf...

  • Page 6: Installing The Projector In Proper Position

    C AUTION IN CARRyING OR TRANSPORTING THE PROjECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – W hen carrying the projector, use a suitable carrying case. – D o not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

  • Page 7: Compliance

    – R eorient or relocate the receiving antenna. – I ncrease the separation between the equipment and receiver. – C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. – C onsult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-XU300, PLC-XU350 Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY Address : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818)998-7322 The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

  • Page 8: Part Names And Functions

    ⑥ Bottom ⑭ ⑮ ① Infrared Remote Receiver ② Zoom Ring ③ Focus Ring ④ Projection Lens ⑤ Lens Cap (See page 61 for attaching.) CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard. ⑥ Speaker ⑤ ⑨ ⑦ Exhaust Vents ⑩ ⑪ ⑫ CAUTION Hot air is exhausted from the exhaust vent. Do not put...

  • Page 9: Rear Terminal

    Rear Terminal ① ① CONTROL PORT When the projector is controlled by a computer, connect to this jack with serial control cable. ② COMPUTER IN 1 / COMPONENT IN Connect output signal from a computer, RGB scart 21-pin video output or component video output to this terminal(pp.14,16). ③ COMPUTER IN  / MONITOR OUT – Connect computer output to this terminal (p.14). – This terminal can be used to output the incoming analog RGB and Component signal from COMPUTER IN 1/COMPONENT IN terminal to the other monitor (pp.14,16). ④ LAN Connection Terminal Connect the LAN cable (refer to the owner’s manual of "Network Set-up and Operation"). ⑤ S-VIDEO IN Connect the S-VIDEO output signal from video equipment to this jack (p.15).

  • Page 10: Top Control

    – S elect an item or adjust the value in the On-Screen Menu (p.21). – P an the image in the Digital zoom +/- mode (p.36). – A djust the volume level (Point 7 8 buttons) (p.24). ③ INPUT button Select an input source (pp.27-28, 37-38). ④ ON/STAND–By button Turn the projector on or off (pp.18-20). ⑤ POwER indicator – L ights red when the projector is in stand-by mode. – L ights green during operations. – B links green in the Power management mode (p.51). ⑥ MENU button Open or close the On-Screen Menu (p.21). ⑨ ⑤ ⑧...

  • Page 11: Remote Control

    Remote Control ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ① ON/STAND-By button Turn the projector on or off. (pp.18-20) ② AUTO SET button Correct vertical keystone distortion and adjust computer display parameters such as Fine sync., Total dots, and Picture position. (pp.23, 45) ③ COMPUTER 1/ buttons Select the COMPUTER 1 or COMPUTER 2 input source. (pp.27-28, 38) ④ VIDEO button Select the VIDEO input source. (p.37) ① ⑤ S-VIDEO button Select the S-VIDEO input source. (p.37)

  • Page 12: Remote Control Battery Installation

    16.4'(5 m) and 60 degrees in front of the projector. Remote Control Code The 2 different remote control codes (Code 1–Code 2) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 53.

  • Page 13: Installation

    Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. ✔ Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. 11.6' (3.5 m) 4.6' (1.4 m) Screen Size 40" (W x H) mm...

  • Page 14: Connecting To A Computer

    • Input sound to the COMPUTER1 /COMPUTER 2 AUDIO IN terminal when using the COMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and not the COMPUTER IN 2. Monitor Output Monitor Input VGA VGA cable cable COMPUTER MONITOR IN 2 AUDIO OUT (stereo) External Audio Equipment Audio Input Audio cable (stereo) Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

  • Page 15: Connecting To Video Equipment

    Connecting to Video Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable (Cables are not supplied with the projector. ) Video and Audio Output (Video) Video and audio cable VIDEO AUDIO IN ✔ Note: When the AUDIO OUT is plugged-in, the projector's built- in speaker is not available. External Audio Equipment Audio Input Audio cable (stereo) AUDIO OUT (stereo) Installation S-Video Output S-Video cable S-VIDEO Unplug the power cords of both the projector and external equipment from the AC outlet...

  • Page 16: Connecting To Component Video Equipment

    Cables used for connection • Audio Cables • Scart-VGA Cable • VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with this projector.) RGB Scart 21- Component Video Output pin Output Scart-VGA cable Component- VGA cable COMPUTER IN 1/ COMPONENT IN ✔Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 73 for ordering optional cables. Monitor Input Audio Output (Y, Pb/Cb, Pr/Cr) Component cable Audio VGA cable cable (stereo) COMPUTER IN 1 / COMPUTER IN 2 / COMPUTER IN 2 AUDIO IN MONITOR OUTPUT...

  • Page 17: Connecting The Ac Power Cord

    Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station.

  • Page 18: Basic Operation

    After the countdown, the input source that was selected the last time and the lamp control status icon (see page 53) appear on the screen. If there is no signal input when start on the projector, or the current signal is missed while operating the projector, the Video/PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ed buttons and press the SELECT button. And then follow the...

  • Page 19: Enter A Pin Code

    PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 54-55 for locking operation of the projector with your PIN code.

  • Page 20: Turning Off The Projector

    • The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off. • The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power- off.

  • Page 21: How To Operate The On-Screen Menu

    How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.

  • Page 22: Menu Bar

    For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., white balance (R/G/B), Sharpness and Gamma] (pp.34-35). For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., white balance (R/G/ B), Sharpness, Gamma, Noise reduction and Progressive] (pp.41-42). Screen For computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/– ] (pp.35-36). For Video source, used to set size of image [Normal, wide, Custom] (p.43). Sound Used to adjust the volume or mute the sound (p.24). Setting Used to set the projector’s operating configurations (pp.44-57). Information Display the input source information: Input , H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp counter , Power management, Keylock, PIN code lock and Remote control (p.58). Network See owner’s manual of “Network Set-up and Operation”. Guide The key operation is displayed. Sub-Menu (pp.27-28,37-38).

  • Page 23: Zoom And Focus Adjustment

    Zoom and Focus Adjustment Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Auto Setup Function Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Refer to page 45 for the setting of the Auto setup function. ✔ Notes: • Auto Keystone corrects vertical distortion only; it does not correct horizontal distortion. • Auto Keystone cannot work when Ceiling feature is set to On in the Setting menu (p.50). • Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO SETUP or AUTO SET button, adjust manually by...

  • Page 24: Sound Adjustment

    Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE button again to select Off or press the VOLUME +/– buttons. The Mute function is also effective for the AUDIO OUT jack. Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Sound. Press the SELECT button to access the submenu items. Use the Point buttons to select the desired submenu item and press the SELECT button to access the...

  • Page 25: Remote Control Operation

    Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER 1/, VIDEO, S-video and COMPONENT buttons Press the COMPUTER 1/2, VIDEO, S-video and COMPONENT buttons on the remote control to select the input source. See pages 27-28,37-38 for details. FREEZE button Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button.
  • Page 26 Basic Operation NO SHOw button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows. black out ➜ normal ➜ black out ➜ normal ➜ P-TIMER button Press the P-TIMER button on the remote control. The P-Timer display 00:00 appears on the screen and the countdown starts (00:00–59:59). To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again. IMAGE button Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 33, 40 for details.

  • Page 27: Computer Input

    Computer Input Input Source Selection (Computer 1: RGB / Component / RGB(Scart) ) Direct Operation Choose Computer 1(RGB) or Computer 1(RGB(Scart)) by pressing the INPUT button on the top control or press the COMPUTER 1 button on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below.

  • Page 28: Input Source Selection (Computer 2: Rgb)

    Computer Input Input Source Selection (Computer : RGB) Direct Operation Choose Computer (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control. Remote Control COMPUTER  button Computer (RGB) Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point then press the Point or the SELECT button. Use the Point buttons to select Computer  and then press the SELECT button. When Computer  is selected, analog RGB input source will be selected directly. Note: ✔ When the Input Search function is set to On1 or On, the input signal will be searched automatically (p.45).

  • Page 29: Computer System Selection

    This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 71.) One of the following messages may appear when: The projector cannot recognize the connected Auto signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.31-32).

  • Page 30: Auto Pc Adjustment

    Use the Point buttons to select Auto PC Adj . and then press the SELECT button. To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the PC System Menu (see page 29). See also “Store” on page 32. ✔ Note: • Fine sync ., Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image...

  • Page 31: Manual Pc Adjustment

    Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. Press the MENU button to display the On-Screen Menu. Use the Point buttons to select PC Adjust and then press the Point or the SELECT button. Use the Point buttons to select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point adjust the setting value. Fine sync . Use the Point buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Total dots...
  • Page 32 SELECT button. Move the red arrow pointer to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button. ✔ Note: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 70p, 1035i, or 1080i is selected in the PC System Menu (p.29). • When input computer signal to the projector, PC adjust will become available. This Mode has stored parameters. Values of Total dots, Horizontal, Vertical, Display area H, and Display area V. Press MENU button...

  • Page 33: Image Mode Selection

    Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Image Select and then press the Point button. Use the Point buttons to select the desired item and then press the SELECT button. Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Blackboard (Green) For the image projected on a blackboard. This mode help enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.

  • Page 34: Image Adjustment

    Computer Input Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Image Adjust and then press the Point button. Use the Point buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point adjust the setting value. Contrast Press the Point button to decrease the contrast; press the Point button to increase the contrast (from 0 to 63). Brightness Press the Point button to decrease the brightness; press the Point button to increase the brightness (from 0 to 63). Color temp . Use the Point buttons to select the desired Color temp. level (XLow, Low, Mid, or High). white balance (Red) Press the Point button to lighten red tone; press the Point button to deepen red tone (from 0 to 63). white balance (Green) Press the Point button to lighten green tone; press the Point button to deepen green tone (from 0 to 63).

  • Page 35: Screen Size Adjustment

    Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. Full Provide the full screen image. ✔ Note: • The Screen Menu, except for Normal and Custom, cannot be operated when 70p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.29). • This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than 1024 x 768 is modified to fit the screen size in initial mode. • True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.29). buttons to select one A confirmation box appears and then select yes . Screen Menu button. Computer Input...
  • Page 36 Computer Input Custom Adjust the screen scale and position manually with this function. Press the Point button at Custom and the Custom is displayed on the screen, you can use the Point to choose the item you want to adjust. Scale H/V ... Adjust the Horizontal/Vertical screen scale. H&V .. When set to On, the aspect ratio is fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically...

  • Page 37: Video Input

    Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video or S-video by pressing the INPUT button on the top control, or the VIDEO button or the S-video button on the remote control. Before using INPUT button, correct input source should be selected through menu operation as described below. Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Input and then press the Point 8 or Use the Point buttons to select either Video or S-video and then press the SELECT button.

  • Page 38: Input Source Selection (Component, Rgb Scart 21-Pin)

    Video Input Input Source Selection (Component, RGB Scart 1-pin) Direct Operation Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPUTER 1 or the COMPONENT button on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below. Remote Control COMPUTER 1 button Computer 1(RGB) Computer 1(Scart) COMPONENT button (Component) Menu Operation...

  • Page 39: Video System Selection

    The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N. Component Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

  • Page 40: Image Mode Selection

    Menu Operation Press the MENU button to display the On- Screen Menu. Use the Point Image select and then press the Point SELECTbutton. Use the Point buttons to select the desired item and then press the SELECT button . Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Cinema Picture mode adjusted with fine tone. Blackboard (Green) For the image projected on a blackboard. This mode help enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.

  • Page 41: Image Adjustment

    Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point buttons to select the Image Adjust and then press the Point button. Use the Point buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point adjust the setting value. Contrast Press the Point button to decrease the contrast; press the Point button to increase the contrast (from 0 to 63). Brightness Press the Point button to decrease the brightness; press the Point button to increase the brightness (from 0 to 63). Color Press the Point button decrease the intensity of the color; press the Point button increase the intensity of the color (from 0 to 63). Tint Press the Point buttons to adjust the tint value to get a proper color balance (from 0 to 63). Color temp .
  • Page 42 Progressive An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ..Disabled. L1 ... For an active picture. L2 ... For a still picture. Film ..For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Use the Point...

  • Page 43: Screen Size Adjustment

    Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Screen and then press the Point or the SELECT button. Use the Point buttons select the desired item and then press the SELECT button. Normal Provide the image at the 4:3 normal video aspect ratio. wide Provide the image at the 16:9 wide screen ratio. Custom Adjust the screen scale and position manually with this function. Press the Point button at Custom and the Custom is displayed on the screen, you can use the Point to choose the item you want to adjust. Scale H/V ... Adjust the Horizontal/Vertical screen scale.

  • Page 44: Setting

    Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. Press the MENU button to display the On-Screen Menu. Press the Point and press the Point or SELECT button to access the submenu items. Use the Point buttons to select the desired item and then press the Point access the selected item. Use the Point buttons select the desired item and then press the SELECT button. Language The language used in the On-Screen Menu is available in...

  • Page 45: Auto Setup

    Off ... Input search will not work. On1... Input search works under the following situation. – When pressing the AUTO SETUP button on the top control. – When pressing the AUTO SET button on the remote control. On... Input search works under the following situation. – When turning on the projector by pressing the ON/STAND-BY button on the top control or the remote control. – When pressing the AUTO SET button on the remote control. – When pressing the AUTO SETUP button on the top control. – When the current input signal is cut off.* If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when On-...
  • Page 46 On .. Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown Off .. Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off .. Hide the On-Screen Displays except; ● On-Screen Menu ● Power off? (p.20) ● No signal for Power management...
  • Page 47 Logo (Logo and Logo PIN code lock settings) This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code lock and Logo PIN code change functions. ✔ Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected. Logo select This function decides on the starting-up display from among following options.
  • Page 48 (1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. • When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When Logo PIN code lock is set to On, capture cannot be selected. • When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.
  • Page 49 Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number (✳✳✳✳) will turn red for a moment. Enter the correct Logo PIN code all over again. Change the Logo PIN code lock setting Use the Point buttons to switch On or Off, and then press the SELECT button to make a choice.
  • Page 50 This function is used to project the image from rear of the screen. Terminal The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 9) Select Computer  or Monitor Out with the Point buttons. Computer  . . computer input Monitor Out .

  • Page 51: Power Management

    Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready .. When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the...
  • Page 52 On start When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. ✔ Note: Be sure to turn off the projector properly (see “Turning Off the Projector” on page 20). If the projector is turned off in the incorrect sequence, the On start function does not work properly. Standby mode This function is available when operating the projector via network.
  • Page 53 Lamp replacement icon • The Lamp replacement icon will not appear when the Display function is set to Off (p.46), during Freeze (p.25), or No show (p.26). Remote control This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in "Code 2", both the projector and the remote control must be switched to "Code 2". To change the code for the projector: Select either "Code 1" or "Code 2" in this Setting Menu.
  • Page 54 PIN code. The “1234” is set as the initial PIN code at the factory. If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears. When the projector is locked with the PIN code, the Security icon appears on the guide. Key lock buttons PIN code lock...
  • Page 55 DOwN THE NEw PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO ON PAGE 76, AND KEEP IT SECURELy . IF yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED . Enter a PIN code button to...

  • Page 56: Filter Counter

    Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.
  • Page 57 This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order. ✔ Note: When the Factory default function is executed, all the warning log records will be deleted. Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings.

  • Page 58: Information

    Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display the Information Menu. Menu Operation Press the Point buttons to select the Information. The Information Menu is displayed. See below for displayed information. Input The selected input source is displayed. H-sync freq . The horizontal frequency of the input signal is displayed in KHz, or - - - - - when no signal. V-sync freq . The vertical frequency of the input signal is displayed in Hz, or - - - - - when no signal. Numbers of Hz doubles when during Interlace. Screen The selected screen size is displayed. Language The selected language is displayed.

  • Page 59: Maintenance And Cleaning

    STAND-BY button. ✔ Note: The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking. Then check the matters below: – Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

  • Page 60: Cleaning The Filters

    Filter prevents dust from accumulating on the optical elements inside the projector. Should the filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filters immediately. Clean the filters by following the steps below.

  • Page 61: Attaching The Lens Cap

    Attaching the Lens Cap When moving this projector or while not using it over an extended period of time, replace the lens cap. Attach the lens cap according to the following procedures. Thread the string through the hole on the lens cap and then tie a knot in the string to secure it in place. To pass the other end of the string into the hole on the top of the projector and pull at it. Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

  • Page 62: Lamp Replacement

    Maintenance and Cleaning Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

  • Page 63: Lamp Handling Precautions

    IF A LAMP EXPLODES, THE FOLLOwING SAFETy PRECAUTIONS SHOULD BE TAKEN . If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one...

  • Page 64: Appendix

    The initial display is not same as the default set . Input signal switches automatically . (or does not switch automatically) when the projector is on and you press the input button, an icon other than the Lamp mode icon appears.
  • Page 65 . Power management does not work . Capture function does not work . Auto setup does not work properly . – Make sure Off is not selected at any function of Auto setup.See page Auto keystone function does not work even when the projector is tipped . – Check the connection between your computer or video equipment and the projector. See pages 14-16. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer’s instruction...
  • Page 66 Unable to unlock the Logo PIN code lock, Security key lock or Security PIN code lock . – Check PC adjustment menu or Screen and adjust them. See pages 31-32, 35-36. – PIN code lock is being set. Enter a PIN code (the “1234” or numbers you have set). See pages 19, 54-55. – Check the batteries. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4'(5 m). – Make sure the code of the remote control is conformed to the projector’s code. See page 53. – Unlock the Key lock function for the remote control function. See page 54. – Check the status of the projector with referring to "Indicators and projector Condition". See page 70. – Your operation is invalid. Operate correctly. – The top control is not available if the top control is locked at Key lock under Security of SETTING section. See page 54. – Contact the dealer where you purchased the projector or the service center. ...
  • Page 67 : High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. The CE Mark is a Directive conformity mark of the European Community (EC). Pixelworks ICs used. Appendix This symbol on the nameplate means the product is Listed by Underwriters Laboratories I n c .

  • Page 68: Menu Tree

    Appendix Menu Tree Computer Input/Video Input Input Input Computer 1 Computer 2 Video S-Video Sound Sound Volume Mute Computer Input System * Systems displayed in the System Menu vary depending on an input signal. PC Adjust Auto PC adj. Fine sync Total dots Horizontal Vertical Clamp Display area H Display area V Reset Mode free Store RGB Component RGB (Scart) RGB 0–63 On/Off Image Select SVGA 1 Mode 1...
  • Page 69 Logo select User Default Capture Yes/No Logo PIN code lock Off/On Logo PIN code change On/Off On/Off Computer 2/ Monitor out Ready Shut down Timer (1–30 Min.) On/Off Eco/Normal Closed Caption Off/CC1/CC2/CC3/CC4 Color Color/White Lamp control Normal Lamp life control Mode 1/Mode 2 Code 1–Code 2 Key lock Projector Remote control PIN code lock Off/On1/On2 PIN code change L1/L2 Offl/On1/On2 Filter counter Timer Off/100H/200H/300H Filter counter Reset Yes/No Yes/No Input Source Information Display...

  • Page 70: Indicators And Projector Condition

    Appendix Indicators and Projector Condition Check the indicators for projector condition. Indicators LAMP POWER WARNING REPLACE red/green yellow • • • green. • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Projector Condition The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/STAND-BY button ✽ to turn on the projector. ✽ The projector is operating normally. The projector is preparing for stand-by or the projection lamp is ✽ being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking. ✽ The projector is in the Power management mode. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down ✽ enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking.) The projector has been cooled down enough and the temperature ✽ returns to normal. When turning on the projector, the WARNING indicator stops blinking.

  • Page 71: Compatible Computer Specifications

    Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN RESOLUTION DISPLAy VGA 1 640 x 480 VGA 2 720 x 400 VGA 3 640 x 400 VGA 4 640 x 480 VGA 5 640 x 480 VGA 6 640 x 480 VGA 7 640 x 480 MAC LC13 640 x 480 MAC 13 640 x 480 480p 640 x 480 575p 768 x 575 480i 640 x 480 575i 768 x 576 SVGA 1 800 x 600 SVGA 2 800 x 600 SVGA 3...

  • Page 72: Technical Specifications

    Appendix Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment Panel Resolution LCD Panel System Panel Resolution Number of Pixels Signal Compatibility Color System High Definition TV Signal Scanning Frequency Optical Information Projection Image Size (Diagonal) Throw Distance Projection Lens Projection Lamp Interface Video Input Jack S-video Input Jack Audio Input Jacks Computer 1/Computer 2 Audio Input Jacks Computer In 1/Component Input Terminal Computer In 2/Monitor Output Terminal Control Port Connector Audio Output Jack LAN Connection Terminal 100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45 Audio Internal Audio Amp Built-in Speaker Power...

  • Page 73: Optional Parts

    Accessories Owner’s Manual (CD-ROM) Quick Reference Guide & Safety Manual Safety Instructions Manual AC Power Cord Remote Control and Batteries VGA Cable Lens Cap with String PIN Code Label Network Application (CD-ROM) The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are ● effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. Optional Parts The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. COMPONENT~VGA Cable SCART~VGA Cable VGA-Cable (10 m) Model No. : POA-CA-COMPVGA : POA-CA-SCART : KA-MC-DB10 Appendix...

  • Page 74: Pj Link Notice

    Appendix Pj Link Notice This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the owner’s manual of “Network Set-up and Operation.” Projector Input Computer 2 (Analog) Computer 1 Component RGB (Scart) Video Video S-video PJLink is a registered trademark of JBMIA and pending trademark in some countries. PJLink Input Parameter RGB 1 RGB 2 RGB 3 RGB 4 VIDEO 2 VIDEO 3...

  • Page 75: Configurations Of Terminals

    Configurations of Terminals COMPUTER IN 1 /COMPONENT IN /COMPUTER IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) CONTROL PORT CONNECTOR (D-sub 9 pin) Serial ----- R X D T X D ----- ----- ----- LAN TERMINAL TX + TX – RX + ----- 8 7 6 5 4 3 2 1 Red (R/Cr) Input/Output +5V Power/----- Green (G/Y) Input/Output...

  • Page 76: Pin Code Number Memo

    Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No . Logo PIN Code Lock No . While the projector is locked with the PIN code. Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid.

  • Page 77: Dimensions

    Appendix Dimensions Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 219.4(8.64) 93.5(3.68) 232.5(9.15) 101(3.98) 55(2.17) º 12 MAX 80.5(3.17)
  • Page 78 Appendix...
  • Page 79 KF5AC SANyO Electric Co ., Ltd .

This manual is also suitable for:

Plc-xu300kPlc-xu350Plc-xu350kPlc-xu350a - 3500Plc-xu300a - 3000 lumensPlc-xu301 ... Show all

Table of Contents