Table of Contents
Advertisement
01616A DVD-V8000/TWN-Eng5
8/27/56 8:59 AM
Page 64
Alt Video Out Setting
GB
If you connected your DVD-VCR to your television using the S-
Video or Component Video Out jacks, you MUST set the "Alt
(alternative) Video Out" selection in the on-screen menu system.
• You can ONLY watch the DVD player through the S-Video or
1
2
3
1
64
Component Video connection method. The tuner and VCR will
still be viewed through the RF or line outputs.
Open "SETUP MENU"
Press the SETUP button.
Select "DVD Setup"
Using the up/down, move the selection arrow to "DVD Setup," then
push right to select.
Select "Alt Video Out"
Move the selection arrow to "Alt Video Out," then push right to
select from the following options:
• Off - Indicates that you are using the standard RF or Line Out
jacks to connect your DVD-VCR to your TV or display device.
• S-Video – Indicates that you are using the S-Video Out jack on
the rear panel to connect to your TV.
• Component – Indicates that you are using the Component Video
Out jacks on the rear panel to connect to your TV.
Stereo Connections
You can enjoy stereo sound when watching movies and TV shows by
connecting your DVD-VCR to your home stereo system or stereo
TV.
1
Connect DVD-VCR to Stereo
Connect RCA cables from the Line Out Left & Right Audio jacks on
the back panel of the DVD-VCR to the Auxiliary Inputs on your
stereo receiver. If you are using a stereo television, connect the
Video Output as well.
2
Set Stereo to Auxiliary Mode
Set your stereo receiver or television to "Aux" or "Tape," whichever
selects the line input for your particular device.
3
Play a Tape
Insert a DVD or Hi-Fi stereo videotape in your system and adjust the
volume on your stereo receiver or television. You should hear the
audio through your stereo speakers.
• If you still do not hear stereo sound, press the Audio button until
"Stereo" appears on the on-screen display.
GB
65
Advertisement
Table of Contents
