Table of Contents
Advertisement
12
a
b
X 2
: Depending on model /
Ανάλογα με το μοντέλο / Típusfüggő / In base al modello / Zależnie od modelu / Dependendo do modelo / În funcţie de model /
В зависимости от модели / U zavisnosti od modela / Ovisno o modelu / Odvisno od modela / En función del modelo / Modele
www.lg.com
bağlı olarak değişkenlik gösterebilir / Залежно від моделі
14
16
20
AAA
X 6
(M4 X L20)
32LV341*
32LV541*
X 2
/ В зависимост от модела / Závisí na modelu / Selon le modèle / Abhängig vom Modell /
X 8
(M4 X L20)
43/49/55LV341*
43/49/55LV541*
X 2
LED TV
LV341*
LV541*
Advertisement
Table of Contents
Related Manuals for LG 43LV341H-ZA
Summary of Contents for LG 43LV341H-ZA
- Page 1 Ανάλογα με το μοντέλο / Típusfüggő / In base al modello / Zależnie od modelu / Dependendo do modelo / În funcţie de model / В зависимости от модели / U zavisnosti od modela / Ovisno o modelu / Odvisno od modela / En función del modelo / Modele www.lg.com bağlı olarak değişkenlik gösterebilir / Залежно від моделі...
- Page 3 43/49/55LV341*, 32LV341*, 32LV541* 43/49/55LV541* 43/49/55LV341*, 32LV341*, 32LV541* 43/49/55LV541*...
- Page 4 ANTENNA/ CABLE IN HDMI IN USB IN H/P OUT Satellite IN...
- Page 5 OPTICAL DIGITAL AUDIO OUT CLOCK COMPONENT IN AV IN VIDEO/Y P VIDEO/Y P L/MONO AUDIOR L/MONO AUDIOR...
- Page 6 COMPONENT IN AV IN VIDEO/Y P L/MONO AUDIOR VIDEO/Y P L/MONO AUDIOR VIDEO AUDIO VIDEO L/MONO AUDIOR...
- Page 7 HDMI-DVI IN RGB IN RGB IN HDMI IN VIDEO/Y P L/MONO AUDIOR VIDEO/Y P L/MON AUDIOR AUDIO OUT AUDIO OUT DVI OUT RGB OUT...
- Page 9 32LV341H-ZA 6.05 4.85 32LV541H-ZA 43LV341H-ZA 79.4 12.45 43LV541H-ZA 49LV341H-ZA 1107 79.4 14.55 11.3 49LV541H-ZA 55LV341H-ZA 1241 63.0 19.5 16.3 55LV541H-ZA...
- Page 10 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
- Page 11 Warning! Safety instructions • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. • ...
- Page 12 Otherwise, • Only use an authorized AC adapter and power cord approved by the product may fall over, which may cause injury or damage the LG Electronics. Otherwise, this may result in fire, electric shock, product. malfunction or product deformation.
- Page 13 • Please follow the installation instructions below to prevent the • Do not use high voltage electrical goods near the TV (e.g. electric product from overheating. mosquito-swatter). This may result in product malfunction. - The distance between the product and the wall should be more • ...
-
Page 14: Separate Purchase
• Antenna isolator installation guide (Depending on model) • Do not use any unapproved items to ensure the safety - Use this to install TV in a place where there is a voltage and product life span. difference between TV Set and GND of antenna signal. • ... -
Page 15: Lifting And Moving The Tv
Lifting and moving the TV Using the button Please note the following advice to prevent the TV from being scratched (Depending on model) or damaged and for safe transportation regardless of its type and size. You can simply operate the TV functions, using the button. • ... -
Page 16: Basic Functions
Mounting on a table Basic functions <A type> Power On (Press) 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper Power Off (Press and hold) ventilation. -
Page 17: Attaching The Tv To A Desk
Attaching the TV to a desk Using the kensington security system (This feature is not available for all models.) The TV should be attached to a desk so it cannot be pulled in a forward/ (This feature is not available for all models.) backward direction, potentially causing injury or damaging the product. -
Page 18: Adjusting The Angle Of The Tv To Suit View
We recommend the use cover the stand hole using tape, in order to prevent the influx of of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with dust and insects. (Depending on model) cables connected. -
Page 19: Connections (Notifications)
How to use Dual Lock™ Connections (notifications) (Only when the item of the following form is provided) Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s (This feature is not available for all models.) connection, refer to the manual provided with each device. -
Page 20: Ci Module Connection
CI module connection • Use only with the 3 Pole 3.5 mm Stereo Jack. • Do not connect your headphones or earphones to the port for (Depending on model) connecting an external speaker. View the encrypted (pay) services in digital TV mode. • ... -
Page 21: Network Setup
Remote control Network setup Wired network connection (Some buttons and services may not be provided depending on models (Depending on model) or regions.) This TV can be connected to a Pro:Centric server via the LAN port. After The descriptions in this manual are based on the buttons on the remote making the physical connection, the TV needs to be set up for network control. - Page 22 (Depending on model) (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Audio descriptions function will be enabled. Resizes an image. (INPUT) Changes the input source. Number buttons Enters numbers. Accesses the saved programme list.
-
Page 23: Control Buttons
Selects an AV mode. Supported licenses may differ by model. For more information about Changes the input source. licenses, visit www.lg.com. Selects Radio, TV and DTV programme. Number buttons Enters numbers. Accesses the saved programme list. Returns to the previously viewed programme. -
Page 24: Open Source Software Notice Information
LG Electronics will also provide open source code to you on CD-ROM • This panel is an advanced product that contains millions of pixels. for a charge covering the cost of performing such distribution (such... -
Page 25: Specifications
Specifications CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % (Depending on country) Digital TV... - Page 26 HDMI/DVI-DTV supported mode HDMI/DVI-PC supported mode (Use HDMI IN 1 for PC mode) Horizontal Vertical Resolution Frequency Frequency Horizontal Vertical (kHz) (Hz) Resolution Frequency Frequency (kHz) (Hz) 31.46 59.94 640 x 480 640 x 350 31.468 70.09 31.50 60.00 720 x 400 31.469 70.08 31.469...
-
Page 27: Supported Video Formats
Supported video formats Supported audio formats • Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p) • File type : mp3 • .asf, .wmv [Bit rate] 32 Kbps - 320 Kbps [Video] MPEG-4 Part2, XViD, H.264/AVC, VC1(WMV3, WVC1), MP43 [Sample freq.] 16 kHz - 48 kHz [Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3 [Support] MPEG-1, MPEG-2, Layer2, Layer3... -
Page 28: Supported Photo Formats
Supported photo formats • Category : 2D (jpeg, jpg, jpe) [Available file type] SOF0 : Baseline, SOF1 : Extend Sequential, SOF2 : Progressive [Photo size] Minimum : 64 x 64, Maximum (Normal Type) : 15360 (W) x 8640 (H), Maximum (Progressive Type) : 1920 (W) x 1440 (H) • ... - Page 29 IR CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button / Remote control Button Remote control Button 10-19 Number Key 0-9 Remote control Button Remote control Button Remote control Button 8F Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button ...
-
Page 30: External Control Device Setup
EXTERNAL CONTROL DEVICE Type of Connector : D-Sub 9-Pin Male SETUP RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Pin name Connect the serial port of the control device to the RS-232C jack on the product back panel. 3.5 V RXD (Receive data) • RS-232C connection cables are not supplied with the product. TXD (Transmit data) IR OUT from TV GND No Connection No Connection (5 V available in some models) No Connection No Connection (12 V available in some models) RS-232C IN (CONTROL & SERVICE) (*Not Provided) -
Page 31: Communication Parameters
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations (Standard RS-232C cable) DATA COMMAND1 COMMAND2 (Hexadecimal) PC 01. Power 00 to 01 2 3 02. Aspect Ratio (See p. 4) 3 2 03. Screen Mute (See p. 5) 5 5 04. Volume 4 6 ... -
Page 32: Transmission / Receiving Protocol
Transmission / Receiving Protocol 01. Power (Command: k a) ►To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On [Command 1] : First command to control the TV. (j, k, m or x) [a][ ][Set ID][ ][OK/NG][Data][x] [Command 2] : Second command to control the TV. ►To Show TV is Power On/Off. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID Transmission ‘0’ , every connected set is controlled. Set ID is indicated as decimal (1 [k][a][ ][Set ID][ ][FF][Cr] to 99) on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/ receiving protocol. [Data] : To transmit command data. Transmit ‘ FF’ data to read status of [a][ ][Set ID][ ][OK/NG][Data][x] command. [Cr] : Carriage Return * Similarly, if other functions transmit ‘0 x FF’ data based on this for- mat, Acknowledgement data feed back presents status about each ... - Page 33 05. Volume Control (Command: k f) 03. Screen Mute (Command: k d) ►To select screen mute on/off. ►To adjust volume. ►You can also adjust volume with the volume buttons on remote Transmission control. [k][d][ ][Set ID][ ][Data][Cr] Transmission [k][f][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off Data Min : 00 to Max : 64 01 : Screen mute on (Picture off) * Refer to Real data mapping 10 : Video mute on [f][ ][Set ID][ ][OK/NG][Data][x] [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). 06. Contrast (Command: k g) But, in case of Screen mute on, TV will not display OSD. ►To adjust screen contrast. You can also adjust contrast in the PICTURE menu. 04. Volume Mute (Command: k e) ►To control volume mute on/off. Transmission You can also adjust mute using the MUTE button on remote control. [k][g][ ][Set ID][ ][Data][Cr] Transmission Data Min : 00 to Max : 64 [k][e][ ][Set ID][ ][Data][Cr] * ...
- Page 34 12. Remote Control Lock Mode (Command: k m) 08. Colour (Command: k i) ►To adjust the screen Colour. ►To lock the front panel controls on the monitor and remote control. You can also adjust colour in the PICTURE menu. Transmission [k][m][ ][Set ID][ ][Data][Cr] Transmission [k][i][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on Data Min : 00 to Max : 64 * Refer to Real data mapping [m][ ][Set ID][ ][OK/NG][Data][x] [i][ ][Set ID][ ][OK/NG][Data][x] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * In the standby mode, if key lock is on, TV will not turn on by power 09. Tint (Command: k j) on key of IR & Local Key. ►To adjust the screen tint. You can also adjust tint in the PICTURE menu. 13. Balance (Command: k t) Transmission ►To adjust balance. [k][j][ ][Set ID][ ][Data][Cr] You can also adjust balance in the AUDIO menu. Data Red : 00 to Green : 64 * Refer to Real data mapping Transmission [k][t][ ][Set ID][ ][Data][Cr] Data L : 00 to R : 64...
-
Page 35: Power Saving Function
15. Energy Saving (Command: j q) 17. Equalize (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalize. Energy Saving in PICTURE menu. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving MSB LSB Level Function Description Data Low Frequency Power 7 6 5 Frequency 4 3 2 1 0 Step Low Minimum Power 0 0 0 1st Band 0 0 0 0 0 0(decimal) Low ... -
Page 36: External Input
22. Input select (Command: x b) Channel data range Min : 00 Max : 270F (0 to 9999) (Main Picture Input) ►To select input source for main picture. Transmission [a][ ][Set ID][ ][OK/NG][Data][x] [x][b][ ][Set ID][ ][Data][Cr] 19. Programme Add/Skip (Command: m b) Data Structure ►To set skip status for the current Programme. MSB LSB Transmission [m][b][ ][Set ID][ ][Data][Cr] External Input Input Number Data 00 : Skip 01 : Add External Input Data [b][ ][Set ID][ ][OK/NG][Data][x] Analogue 20. Key (Command: m c) Component ►To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] HDMI Data IR CODES [c][ ][Set ID][ ][OK/NG][Data][x] Input Number Data Input1 21. ... - Page 37 * Real data mapping 00 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255...