Head Mounted Display
Startup Guide
Before use, also refer to "Health Precautions" and
"Precautions" in the "Reference Guide."
HMZ-T1
1
Connect
1
Connect a playback equipment and a TV.
If your playback equipment has only one
HDMI OUT jack and you also want to
watch content from it on a TV, connect it
to the processor unit with the supplied
High-Speed HDMI cable, and connect
the processor unit to the TV with another
High-Speed HDMI cable (recommended
cable length: up to 5 m (17 ft)).
Notes
Make sure to set "HDMI pass-through" to
"On" in the "General Setup" menu when
connecting a TV or other display device.
Make sure that the system is in standby
mode when watching content on a
connected TV or other display device.
Playback Equipment
Blu-ray Disc
player
TM
Game console
© 2011 Sony Corporation Printed in Japan
HDMI
IN
TV
Processor unit (Back)
HDMI cable (supplied)
HDMI
OUT
Enjoy Video in Four Steps
By design, the system will offer an impressive experience only after you take
a moment to adjust it to fit you well. Confirm the following steps and prepare
for use before enjoying content with this system.
1
Connect
2
Wear
Adjust the head mounted unit correctly.
Adjust the head mounted unit securely to your head, so that the
display stays directly in front of your eyes.
3
Set Up
Adjust the lens span correctly.
The distance between pupils varies from person to person. Wear the
The distance between
head mounted unit correctly and adjust the lens span to the correct
the centers of the pupils
width to align images on the left and right lenses and form images.
Wide
Narrow
4
Enjoy
What's in the box
Head mounted unit
Processor unit
2
Connect the head mounted unit.
Processor unit (Front)
3
Connect the AC power cord and plug it
in.
To wall outlet
4
Turn the playback equipment on.
AC power cord (2
for Dubai and Saudi
Arabian models, 1 for
HDMI cable (1)
Accessories
other models)
4-297-825-12(1)
Head mounted unit