WF-1000W
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
General
Power source:
Power
consumption:
Output power:
Input terminal:
Output terminal:
Dimensions:
Weight:
Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage
as follows: Slide the AC power supply socket to the visible indication of the side of your local voltage.
AC POWER SUPPLY CORD AND AC PLUG ADAPTOR
QACCE0007AW00
QACCA0001SJ00
QPLGA0253AFZZ
SPECIFICATIONS
AC 110-127 V/220-240 V,
50/60 Hz
DC 15 V ["D" size
(UM/SUM-1, R20 or HP-2)
battery × 10]
28 W
PMPO; 200 W (total)
(AC operation)
MPO; 50 W (25 W + 25 W)
(AC operation, 10 % T.H.D.)
RMS; 25 W (12.5 W + 12.5
W)
(DC operation, 10 % T.H.D.)
Mixing microphone;
600 ohms
CD/LINE; 350 mV/47 kohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Width; 300 mm (11-13/16")
Height; 240 mm (9-1/2")
Depth; 220 mm (8-11/16")
3.8 kg (8.4 lbs.) without bat-
teries
VOLTAGE SELECTION
Radio section
Frequency range:
Tape recorder section
Frequency response:
Signal/noise ratio:
Wow and flutter:
Motor:
Bias system:
Erase system:
Speaker section
Type:
Speakers:
Impedance:
Dimensions:
Weight:
Specifications for this model are subject to change without
prior notice.
– 2 –
FM; 88 - 108 MHz
SW1; 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
MW; 526.5 - 1,606.5 kHz
60 - 12,000 Hz (Normal tape)
40 dB (TAPE 1, recording/playback)
55 dB (TAPE 2, playback)
0.15 % (WRMS)
DC 9 V electric governor
AC bias
Magnet erase
2-way type
12 cm (4-3/4") free-edge speaker × 2
Tweeter × 2
8 ohms
Width; 235 mm (9-1/4")
Height; 262 mm (10-5/16")
Depth; 220 mm (8-11/16")
1.8 kg (4.0 lbs.)/each