Table of Contents
Advertisement
Adjusting
the shelves...
Shelves can be adjusted
to match the way you use
your refrigerator.
Glass shelves are strorag enough
to
hold bottles,
milk and other heavy food items. The
roll-out
she/f should
be the bottom
she/f in your
arrangement.
1111
Glass shelves are
heavy Be careful.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
1. Guide
the rear hooks into the slots in the shelf
supports.
2. Elt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
The roil-out
shelf is removed the same as the
other shelves. However, it must be completely
rolled in to be removed.
To remove door shelves:
l
Lift up and out
To replace:
l
Insert hooks into guides
on both sides.
l
Push down.
Removing the crispet, meat pan and covers...
To remove the crisper and meat pan:
1. Slide crisper and meat pan straight out to stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace
in reverse order
Push the lab
Push the lab
to Clear the Cover.
to Clear the Cover.
To remove the covers:
l
Covers are held in place by two pegs at the back
and two notched tabs in front.
1. Press front tabs out of the way.
2. Lift cover front.
3. Lift back off the pegs.
4. Replace
in reverse order.
Inlo mace.
Ye=
Snap Back Into Place.
Removing freezer shelves.. .
1. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order
Lift the Front
Then the Bat
Removing the freezer basket.. .
irb I
For proper air movement,
keep the freezer basket
Pull to stop;
in place when the refrigerator
is operating.
Lift; Pull Agall,
To remove the basket:
To replace the basket:
l
Slide out to the stop.
l
Place basket on the slides.
GktF
.
l
Lift the front to clear the stop.
l
Make
sure the wire stops
\
l
Slide out the rest of the way.
clear
the front of theslides.
l
Slide basket in.
Advertisement
Table of Contents
