hit counter script
Cisco ASR 900 Series Configuration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 900 Series
  6. Configuration manual
Cisco ASR 900 Series Configuration Manual

Cisco ASR 900 Series Configuration Manual

1 port oc48/ 4 port oc12/oc3 + 12 port t1/e1 + 4 port t3/e3 cem interface module
Hide thumbs Also See for ASR 900 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, Manual
1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM
Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco
ASR 900 Series)
First Published: 2017-04-04
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number:

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 900 Series

Summary of Contents for Cisco ASR 900 Series

  • Page 1 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series) First Published: 2017-04-04 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com...
  • Page 2 © Cisco Systems, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Shutting Down a CEM Channel Configuring DS1 CT3 SAToP Mode on OCx Ports 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 4 Configuring the Controller of Clear Channel T3 Interfaces Verifying Controller Configuration of Clear Channel T3 Interfaces 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 5 Clock Recovery System for SAToP C H A P T E R 6 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 6 Example: Applying the MPLS EXP Imposition Policy Map to an EVC Example: Defining an MPLS EXP Label Switched Packets Policy Map 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 7 Section Alarms Line Alarms Path Alarms VT Alarms T1 Alarms T3 Alarms 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 8 Overview of SDH Basic SDH Signal SDH Hierarchy SDH Frame Structure 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series) viii...
  • Page 9 Configuring AU-3 — TUG-2 — VC-12 — E1 Verifying Mode VC-1x Configuration Restrictions for SDH 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 10 Configuring T1 Bert Configuring BERT in Mode T3/E3 Verifying BERT Configuration in Mode T3/E3 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 11 Verifying VC Configuration Parameters Configurations Configuring ACR Verifying ACR Configuration Configuring DCR Verifying DCR Configuration 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 12 Contents 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 13: Interface Module

    • Mixed mode support, for example, DS1 and E1 or DS3 and E3 or SONET and SDH simultaneously on different ports is not available. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 14: Port Licensing

    • To remove the "shut" state, perform any one of the following actions: 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 15: Installing A License

    Use the show license detail command to verify the license configuration: Router#show license detail Index: 15 Feature: oc3 Version: 1.0 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 16: Disabling A License

    To configure T1 interface, use the following commands: enable configure terminal controller mediatype 0/4/0 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 17: Enabling T3 Controller

    Cisco IOS Master Commands List, All Releases Compact-SFP Cisco SFP Modules for Gigabit Ethernet Applications Data Sheet 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 18: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 19: Configuring Cem

    T3 circuit, a virtual tributary of a SONET circuit, or unstructured Circuit Emulation Service (CES). 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 20: Configuring Cem

    The following sections describe the parameters you can configure for CEM circuits. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 21: Configuring Vt Ds1 Satop Mode

    To configure VT DS1 SAToP mode, use the following commands: enable configure terminal controller MediaType 0/4/16 mode sonet controller sonet 0/4/16 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 22: Configuring Sts-Nc Cep

    MediaType 0/4/16 mode sonet controller sonet 0/4/16 rate oc12 sts-1 1 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 23: Configuring Cem Aps

    To restore the system to its default condition, use the no form of the command. Note 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 24: Configuring Cem Aps

    1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 25: Additional References For Configuring Cem

    Cisco IOS Master Commands List, All Releases Standards Standards Title — There are no standards for this feature. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 26 Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 27: Configuring T1 Interfaces

    0/4/0 mode t1 exit controller t1 0/4/0 clock source internal framing esf 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 28: Verifying Controller Configuration

    0/4/0 cem 0 xconnect 2.2.2.2 10000 encapsulation mpls exit 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 29: Verifying Cem Configuration For Satop

    Table 1: BERT Pattern Descriptions Keyword Description Repeating pattern of ones (...111...). 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 30: Configuring Bert

    DSX1 BERT sync : no sync DSX1 BERT sync count : 0 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 31: Loopback On T1 Interfaces

    The framer does not reclock or reframe the incoming data. All incoming data is received by the interface module driver. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 32: Configuring Loopback

    1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 33: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 34: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    Configuring T1 Interfaces Associated Commands 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 35: Configuring T3 Interfaces

    The following are the benefits of T3 interfaces: • Higher bandwidth • Flexibility by channelization 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 36: Enabling T3 Controller

    0 C-bit Coding Violation, 7 P-bit Err Secs, 7 P-bit Severely Err Secs, 0 Severely Err Framing Secs, 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 37: Configuring The Controller Of Channelized T3/T1 Interfaces

    0 Severely Errored Line Secs 0 Far-End Errored Secs, 0 Far-End Severely Errored Secs 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 38: Configuring Satop - Clear Channel T3 Interfaces

    Unavailable Sec: 0 Failure Counts: 0 Pkts Malformed: 0 JitterBuf Overrun: 0 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 39: Configuring Satop - Channelized T3/T1 Interfaces

    Pkts Missing: 135682 Pkts Reordered: 0 Misorder Drops: 0 JitterBuf Underrun: 137649 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 40: Performance Monitoring

    If your configuration is as follows: • T1 is up • No alarms • Framing is unframed 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 41: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs Other Far End Counters: 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 42: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    0 Severely Errored Line Secs 0 Far-End Errored Secs, 0 Far-End Severely Errored Secs 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 43: Troubleshooting T3 Controllers

    • Configuration of a remote testing equipment to transmit the same BERT test pattern at the same time Table 1 lists different BERT keywords and their descriptions. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 44: Configuring Bert For Clear And Channelized T3 Interfaces

    0/4/12 no channelized bert pattern 0s interval 30 direction line exit 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 45: Verifying The Bert Configuration For T3 Interfaces

    All incoming data is received by the interface driver. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 46: Configuring Loopback For T3 Interfaces

    The commands used to configure the interfaces. Commands controller mediatype https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-c2.html#wp3512725718 mode t3/e3 https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-l2.html#wp5688885940 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 47: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 48: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    Configuring T3 Interfaces Associated Commands Commands t1/e1 loopback https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-t1.html#wp3852360411 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 49: Configuring Pseudowire

    The chassis supports the pseudowire type that utilizes CEM transport: Structure-Agnostic TDM over Packet (SAToP). L2VPN over IP/MPLS is also supported on the interface modules. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 50: Structure-Agnostic Tdm Over Packet

    You need metroaggrservice license to configure CEM group on the Interface Module. Note 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 51: Configuring Cem Classes

    Default payload sizes are as follows: • T3 clear channel= 1024 bytes 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 52: Setting The Dejitter Buffer Size

    CEM 0/4/0 ACTIVE --/-- CEM 0/4/0 ACTIVE --/-- CEM 0/4/0 ACTIVE --/-- 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 53: Associated Commands

    1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 54: Additional References For Configuring Pseudowire

    Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 55: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 56: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    Configuring Pseudowire Additional References for Configuring Pseudowire 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 57: Clock Recovery System For Satop

    In other words, a synchronous 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS...

  • Page 58: Differential Clock Recovery (Dcr)

    IM Card Pseudowires Supported (Number of Clocks Derived) T1 CEM Interface Module 1476 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 59: Prerequisites For Clock Recovery

    The clock configuration on controller must be done before configuring the clock recovery on global Note configuration mode. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 60: Configuring Adaptive Clock Recovery Of T3 Interfaces For Satop

    1 cablelength 224 interface CEM 0/4/12 no ip address cem 0 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 61: Configuring Differential Clock Recovery Of T3 Interfaces For Satop

    Use the show running-config | section command to verify the configuration of differential clock of channelized T3/T1 interfaces: Router# show running-config | section 0/4/12 controller MediaType 0/4/12 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 62: Associated Commands

    1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 63: Additional References For Clock Recovery

    Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 64: 1 Port Oc48/ 4 Port Oc12/Oc3 + 12 Port T1/E1 + 4 Port T3/E3 Cem Interface Module Configuration Guide, Cisco

    Clock Recovery System for SAToP Additional References for Clock Recovery 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 65: Cem Over Mpls Qos

    Setting the MPLS EXP value allows you to: • Classify traffic 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 66: Prerequisites For Cem Over Mpls Qos

    [match-all | match-any] class-map-name match mpls experimental topmost mpls-exp-value 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 67: Marking Mpls Exp On Imposed Labels

    3: Router(config)# class-map exp3 Router(config-cmap)# match mpls experimental topmost 3 Router(config-cmap)# exit 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 68: Example: Defining A Policy Map And Applying The Policy Map To An Ingress Interface

    Router(config)# policy-map mark-up-exp-2 Router(config-pmap)# class prec012 Router(config-pmap-c)# set qos-group 3 Router(config-pmap-c)# exit Router(config-pmap)# exit 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 69: Example: Applying The Mpls Exp Imposition Policy Map To A Main Interface

    Router(config-pmap)# class exp012 Router(config-pmap-c)# set mpls experimental topmost 2 Router(config-pmap-c)# exit Router(config-pmap)# exit 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 70: Interface

    RFCs RFCs Title — There are no RFCs for this feature. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 71: Additional References For Cem Over Mpls Qos

    Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 72: Additional References For Cem Over Mpls Qos

    CEM over MPLS QoS Additional References for CEM over MPLS QoS 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 73: Configuring Sonet

    How to Configure SONET, page 75 • ONS Pluggables, page 89 • Associated Commands, page 91 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 74: Overview Of Sonet

    • You should configure the clock source line and network-clock sync together to receive the clock from a remote port that is connected to the SONET port. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 75: Sonet Switching

    VT 1.5 OC-3, OC-12, OC-48, OC-192 VT DS1 SAToP OC-3, OC-12, OC-48, OC-192 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 76: Sonet Hierarchy

    1.544 Mbps DS1 signals and insert path overhead to form an STS-1 signal. This layer is concerned with end-to-end transport of data. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 77: Sts-1 And Sts-3 Frames

    * 810 B/frame = 51.84 Mbs, of which the payload is roughly 49.5 Mbs, enough to encapsulate 28 DS-1s, a full DS-3, or 21 CEPT-1s. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 78: Sonet Line And Section Configuration Parameters

    • internal — The link uses the internal clock source. This is the default setting. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 79: Bert

    34368 kbps and 139264 kbps • 2^31 2^31-1 test pattern • 2^9 2^9-1 test pattern 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 80: Concatenated Sonet Frames

    • BERT — Starts the BERT test. • Clock — Specifies the clock source for T1 interface. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 81: Sonet T3 Configuration Parameters

    SONET lines or paths to be configured for line or path redundancy. In the event of 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS...

  • Page 82: 1+1 Aps

    • With APS, the effect of a failure is greatly minimized and a fast switchover guarantees minimal effect on the network. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 83: Aps 1+1 For Sonet Layer 1 Traffic

    7 Device 2 sends K2 byte over the new active line to Device 1 . Device 1 receives this signal and starts accepting the data from this new active line. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 84: Scenario For Unidirectional Aps 1+1

    Typically, a SONET chassis sends alarms both upstream and downstream in order to notify other devices of the problem condition. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 85: Sonet Alarm Surveillance

    • RDI-P — STS Path Remote Defect Indication • PLM-P — STS path Payload Label Mismatch 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 86: Vt Alarms

    • SEF/AIS-FE — Far End SEF/AIS • TCA for Line and Path DS3 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 87: Alarm Indicators

    Managing and Monitoring SONET Line This section describes how to manage and monitor SONET. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 88: Configuring Line And Section Overhead

    To configure Shut, use the following commands: enable configure terminal controller sonet 0/0/16 shutdown 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 89: Configuring Alarm Reporting

    To configure STS-1 modes, use the following commands: enable configure terminal controller sonet 0/0/16 sts-1 1 mode vt-15 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 90: Configuring Ds1/T1 Ct3 Mode Of Sts-1

    Configuring APS for SAToP This section describes the configuration of APS for SAToP. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 91: Configuring Bi-Directional Acr (Sonet Framing)

    The following example shows the configuration under the ACR controller: Router#show running-config | sec ACR controller SONET-ACR 1 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 92 Output interface: Te 0/0/16, imposed label stack {100} Preferred path: not configured Default path: active Next hop: 31.1.1.2 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 93: Configuring Vt 1.5-T1 Loopback

    1 clock source internal mode vt-15 vtg 1 t1 1 loopback local 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 94: Configuring Vt 1.5-T1 Bert

    ===> the clocking config Medium info: Type: Sonet, Line Coding: NRZ, SECTION: 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 95 TCA threshold: B3 = 10e-6 Rx: C2 = 00 Tx: C2 = 00 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 96 K1 = 00, K2 = 00 Shows the K1 and K2 values. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 97: Performance Monitoring Use Cases Or Deployment Scenarios

    09:52-09:52 SONET Section Tables INTERVAL SEFS 09:52-09:52 SONET Path Tables INTERVAL 09:52-09:52 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 98 Alarm reporting enabled for: PLOP LOM B3-TCA TCA threshold: B3 = 10e-6 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 99: Performance Monitoring Use Cases Or Deployment Scenarios

    SONET/SDH Path Tables INTERVAL 09:52-09:52 OC3.STS1 0/0/16 Path 1 is down. Hardware is A900-IMA3G-IMSG 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 100: Performance Monitoring Use Cases Or Deployment Scenarios

    0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs 360 Unavail Secs, 0 Stuffed Secs 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 101: Ons Pluggables

    Link reach for 50u fiber (m) = SR(2km) (0) IR-1(15km) (0) IR-2(40km) (0) LR-1(40km) (0) 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 102 Date code (yy/mm/dd) = 15/06/19 Connector type = LC. Encoding = 8B10B 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 103: Associated Commands

    1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 104 [OC3 | OC12 | OC48 | OC192] http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-o1.html#wp4442889730 shutdown http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-s6.html#wp3364503641 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 105 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 106 Configuring SONET Associated Commands 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 107: Configuring Sdh

    • Network Node Interface (NNI) defined by CCITT/ITU-TS for worldwide use and partly aompatible with SONET 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 108: Basic Sdh Signal

    Multiplex Section Overhead. The STM frame is transmitted in a byte-serial fashion, row-by-row, and is 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 109 J1 byte is indicated by the pointer byte values. VCs can also be concatenated to provide more capacity in a flexible fashion. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 110: Cem Overview

    Services Provided by SDH Configuration The following services are provided by SDH Configuration: 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 111 • Configuring AU-3 or AU-4 Mapping • Configuring Mode TUG-3 • Configuring VC4—TUG-3—TUG-2—VC-12—VC 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 112 • Configuring AU-3 or AU-4 Mapping • Configuring Mode VC-1x • Configuring AU-3—TUG-2—VC-11—T1 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 113: Sdh Multiplexing

    “fixed stuffing” bits that carry no information, but are required to fill up the particular frame. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 114: Modes Of Sdh

    • AU-3 — TUG-2 — VC-12 • AU-3 — VC-3 — E3 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 115: Configuring Aug Mapping

    3 aug mapping au-4 stm 4 au-4 1 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 116: Configuring Modes Under Au-4 Mapping

    1 mode vc4 clock source internal au-4 2 au-4 3 au-4 4 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 117: Configuring Mode Tug-3

    2 tug-3 3 au-4 2 au-4 3 au-4 4 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 118: Configuring Au-4 — Tug-3 — Vc-3 — E3

    2 payload VC11 tug-2 3 payload VC11 tug-2 4 payload VC11 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 119: Configuring Au-4 — Tug-3 — Tug-2 — Vc-11 — T1

    1 overhead v5 2 Overhead v5 should match with the peer end. Note 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 120: Configuring Au-4 — Tug-3 — Tug-2 — Vc-11 — Vc

    6 payload VC11 tug-2 7 payload VC11 tug-3 2 tug-3 3 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 121: Configuring Mode Vc-4 Nc

    0/0/16 rate stm4 au-3 1 mode t3 cem-group 100 unframed 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 122: Configuring Au-3 — Vc-3 — E3

    MediaType 0/0/16 mode sdh controller sdh 0/0/16 rate stm4 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 123: Configuring Au-3 — Tug-2 — Vc-11 — T1

    4 payload VC12 vc 1 cem-group 4 cep tug-2 5 payload VC11 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 124: Restrictions For Sdh

    Table 7: Bandwidth Used by Different Rates Rate Bandwidth (kbit/s) STM-1 150,336 STM-4 601,344 STM-16 2,405,376 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 125: Configuring Mediatype Controller

    • S1S0 — Sets the SS bits value of the H1 byte in the SDH line overhead. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 126: Configuring Line And Section Overhead

    • local — Loops the signal from Tx to Rx path. Sends alarm indication signal (AIS) to network. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 127: Configuring Line Loopback

    Disables the interface. Configuring Shut To configure Shut: enable configure terminal controller sdh 0/0/16 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 128: Alarm Reporting

    To restore the system to its default condition, use the no form of the alarm report command. 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 129: Clock Source

    Alarm reporting enabled for: SLOS SLOF LAIS SF SD LRDI B1-TCA B2-TCA 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 130: Configuring Sdh Path Parameters

    Mediatype 0/0/16 mode sdh controller sdh 0/0/16 au-4 1 overhead c2 10 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 131: Path Threshold

    0/0/16 au-4 1 threshold b3-ber_sd 7 threshold b3-ber_sf 7 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 132: Path Loopback

    STRING overhead j1 expected message STRING threshold b3-tca 5 au-4 2 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 133: Configuring Bert In Sdh For Satop

    • 2^23 - O.151 - Error and Jitter measurement of 34368 kbps and 139264 kbps 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 134: Configuring Bert In Modes Vc-4 And Vc Nc

    1 payload vc11 t1 1 bert pattern 2^11 interval 10 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 135: Configuring Bert In Mode T3/E3

    #show controller sdh 0/0/16 | sec BERT BERT test result (running)Test Pattern : 2^15, 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 136: Sdh T1/E1 Configuration Parameters

    0 aug mapping au-4 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 137: Sdh T3/E3 Configuration Parameters

    Use show running-configuration command to verify SDH T3/E3 parameters configurations: #show running-configuration controller sdh 0/0/16 rate stm1 au-4 2 mode tug-3 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 138: Sdh Vc Configuration Parameters For Satop

    Use show running-configuration command to verify VC configuration parameters configuration: #show running-configuration controller SDH 0/0/16 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 139: Configuring Acr

    1 mode e3 overhead c2 0 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 140: Verifying Acr Configuration

    3 payload vc11 tug-2 4 payload vc11 To configure E3 DCR: enable configure terminal 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

  • Page 141: Verifying Dcr Configuration

    Clock Type Mode Status Frequency Offset(ppb) Circuit-No STMx-E3 DIFFERENTIAL ACQUIRED 0/1/1 (Port/au-4/tug3) 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
  • Page 142 Configuring SDH Verifying DCR Configuration 1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)

Table of Contents