CHAPTER 4: SETPOINTS
IEC 61850
The IEC 61850 Configurator
850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
The optional communications processor supports both the IEC61850 GOOSE and IEC
61850 MMS Server service as per IEC 61850 standard Ed. 2. The GOOSE messaging service
provides the 850 unit the ability to Publish/Subscribe Digital Input Status and its Quality
and Timestamp to/from other IEDs with supporting GOOSE messaging service, while the
server support allows remote control center, RTU/Gateway, local HMI or other client role
devices access to the relay for monitoring and control. The configuration of IEC61850
services is accomplished using the 850 configuration software, EnerVista 8 Series
Setup software. A rebooting MUST be done before any changes made take affect.
The 850 supports the IEC 61850 protocol which is identified by order code option "2E".
The IEC 61850 configurator is found in both the online and offline section of the EnerVista
8 Series Setup software for configuring the online 850 and offline 850 settings file
respectively.
Online and Offline Setup
ONLINE SETTINGS FILE
Two options are available to configure the relay's online settings file.
1.
Configuration
–
Configure the 850 (having order code option: IEC 61850) through the Device Setup
or Quick connect screen.
–
The IEC 61850 Configurator "tree" item is displayed after Maintenance. See figure
below.
–
Launch the online IEC 61850 configurator screen, by double-clicking on the
IEC61850 Configurator "tree" item.
–
Select the required settings from the different tab displays (in the configurator
screen) to complete the IEC 61850 configuration.
2.
Online right-click option
–
Select any online relay and right click on the selected "tree" item. More options
become available for selection, as shown in the next examples.
Example of Additional Options
DEVICE
4–43