Table of Contents
Advertisement
Fig. 28
Place one of the three bolts into the hole of one
rubber plug (1), fit the others respectively (2) and
press the sanding plate onto the bearing as far as
it will go.
Fig. 29
Bring the machine back into vertical position.
Fig. 30
Release the clamping lever of the handle (1), adjust
the handle height to your convenience (2) and pull
the clamping lever back into its prior position (3).
28
5
WORKING WITH THE TRIO
5.2.2 MOUNTING THE SANDING PLATES
1
Mount the sanding plate of your choice by placing one of the
three locking bolts into the hole of one rubber plug (fig. 28, 1)
and then fitting the other two bolts into their respective
rubber plugs (fig. 28, 2). Then press the sanding plate onto
the bearing as far as it will go.
CAUTION!
RISK OF INJURY and RISK OF PROPERTY DAMAGE:
•
Make sure the sanding plates are in place correctly! They
must fit tightly on the bearing and slide into place with a
perceptible click!
•
Always use three sanding plates of the same type!
2
Bring the machine back into vertical position so that the
sanding plates are resting flat on floor surface (fig. 29).
3
Release the clamping lever of the handle (fig. 30, 1), adjust
the handle height to your convenience (fig. 30, 2) and pull
the clamping lever back into its prior position (fig. 30, 3).
TRIO 01.04.2015
English / Englisch
- Quick Links:
- Working with the Trio
Hide quick links:
Advertisement
Table of Contents
