Table of Contents
Advertisement
®
xStack
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID (1-8191)
MD
MA
MAC Address
LBMs Number (1-
65535)
LBM Payload Length
LBM Payload Pattern
LBMs Priority
Click the Apply button to accept the changes made.
CFM Linktrace Settings
On this page the user can configure the CFM Linktrace message.
To view the following window, click OAM > CFM > CFM Linktrace Settings, as shown below:
The fields that can be configured are described below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 11-13 CFM Loopback Settings window
Description
Here the user can enter the MEP name.
Here the user can enter the MEP ID.
Here the user can enter the maintenance domain name.
Here the user can enter the maintenance association name.
Here the user can enter the destination MAC address.
Number of LBMs to be sent. The default value is 4.
The payload length of LBM to be sent. The default is 0.
An arbitrary amount of data to be included in a Data TLV, along with an indication whether
the Data TLV is to be included.
The 802.1p priority to be set in the transmitted LBMs. If not specified, it uses the same
priority as CCMs and LTMs sent by the MA.
Figure 11-14 CFM Linktrace Settings window
388
Advertisement
Table of Contents
