SERVICE MANUAL DVD DIGITAL CINEMA SYSTEM MB570 2006 TH-C90A,TH-C90US,TH-C90UX, TH-C90UG,TH-C60US,TH-C60UP, TH-C60UW,TH-C60UX,TH-C60UY, TH-C60UG SP-THC90F SP-THC90F SP-THC60F SP-THC60F SP-THC60S SP-PWC90 SP-PWC60 SP-THC90S SP-THC90S SP-THC90C SP-THC60C XV-THC90 XV-THC60 Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) TABLE OF CONTENTS PRECAUTION.
Page 2
SPECIFICATION Center unit (XV-THC90/XV-THC60) Audio section Digital input*1 DIGITAL IN (DBS) (OPTICAL) -21 dBm to -15 dBm (660 nm ±30 nm) Analog input AUX IN (VCR) TAPE IN (Only for XV-THC90) Analog output TAPE OUT (Only for XV-THC90) Video section Video System PAL/NTSC Horizontal Resolution...
Page 3
Satellite Speakers (SP-XTHC90) Front speakers (SP-THC90F) Type 2-way 3-speaker Bass reflex type (Magnetically shielded Type) × × Speaker 13.5 cm cone 2, 6.0 cm cone Power Handling Capacity 140 W Ω Impedance Frequency Range 60 Hz to 20 000 Hz Sound Pressure Level 89 dB/W·m ×...
SECTION 1 PRECAUTION Safety Precautions (1) This design of this product contains special hardware and voltmeter. many circuits and components specially for safety purpos- Move the resistor connection to each exposed metal es. For continued protection, no changes should be made part, particularly any exposed metal part having a return to the original design unless authorized in writing by the path to the chassis, and measure the AC voltage across...
Page 5
Preventing static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs. 1.5.1 Grounding to prevent damage by static electricity Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as laser products.
Page 6
Important for laser products 1.CLASS 1 LASER PRODUCT 5.CAUTION : If safety switches malfunction, the laser is able to function. 2.CAUTION : (For U.S.A.) Visible and/or invisible class II laser radiation 6.CAUTION : Use of controls, adjustments or performance of when open.
SECTION 2 SPECIFIC SERVICE INSTRUCTIONS Extension cable for subwoofer Please use the extension cable described to Service Bulletin (No. MB-SB-00018-2) when you service. It is an extension cable for the subwoofer. Parts No. Parts name Amount used EXTPWC5-14P Extension cable EXTPWM505-09P Extension cable Amp.
SECTION 3 DISASSEMBLY Main body 3.1.1 Removing the Metal cover (See Fig. 1, 2) (1) Remove the three screws A attaching the Metal cove from back side. (See fig. 1) (2) Remove the four screws B attaching the Metal cover from both side.
Page 9
3.1.2 Removing the Front panel assembly (See Fig. 3 to 5) (1) Disconnect the card wires from Front panel assembly con- nected to connectors CN450, CN457, CN455 CN451 CN450 of the main board assembly. (See Fig. 3) (2) Remove the one screw C attaching the earth wire to Main board assembly.
Page 10
3.1.3 Removing the Audio & Digital input board assembly (See Fig. 6 to 8) (1) Disconnect the card wire from Main board connected to connector CN102 of the Audio & Digital input board assem- Audio&Digital input board bly. (See Fig. 6) CN102 (2) For TH-C90, remove the one screw E and two screws F at- taching the Audio &...
Page 11
3.1.4 Removing the Tuner pack (See Fig. 9, 10) (1) Disconnect the card wire from Tuner pack connected to connector CN410 of the Main board assembly. (See Fig. 9) Tuner (2) Remove the two screws J attaching the Tuner pack. (See Fig.
Page 12
3.1.5 Removing the Main board assembly (See Fig. 11, 12) (1) Disconnect the card wires from DVD servo board assembly connected to connector CN402, CN403 CN404 of the CN402 Main board Main board assembly. (See Fig. 11) (2) Remove the four screws K attaching the Main board as- sembly.
Page 13
3.1.6 Removing the USB jack board assembly (See Fig. 13) (1) Disconnect the connector wire from USB jack board as- sembly connected to connector CN811 of the DVD servo board assembly. (2) Remove the one screw M attaching the USB jack board as- CN811 sembly.
Page 14
3.1.8 Removing the Operation board assembly (See Fig. 15) (1) Remove the one screw P attaching the bracket board. (2) Remove the four screws Q attaching the Operation board. Operation board 3.1.9 Removing the Front board assembly (See Fig. 15, 16) (1) Remove the bracket board.
Page 15
DVD mechanism section 3.2.1 Removing the DVD module board (See Fig.1) (1) Disconnect the card wire connected to CN451, CN452, CN451 CN453, CN101 CN102 of DVD module board. (See Fig.1) (2) Remove the two screws A attaching the DVD module board.
3.2.3 Removing the tray assembly (See Fig.3 to 7) (1) Remove the two screws D from the top cover and release the two joints a on both sides of the body. (See Fig.3) (2) Remove the top cover with the two rods attached to the top Open detect lever cover and lifter assembly respectively.
3.2.4 Removing the motor board (See Fig.8) (1) Remove the two screws D attaching the motor board. Soldering point (2) Remove the spacer fixing the motor board and tray switch- board, and disconnect the connector on the motor board. (3) Disconnect the card wire from connector on the motor board.
Page 18
3.2.6 Removing the pickup (See Fig.10 and 11) (1) Remove the one screw F and G attaching the spring hold- er. (See Fig.10) (2) Lift up the shaft from the tramecha assembly. (See Fig.10) (3) Remove the two screws H attaching the lack. (See Fig.11) Pickup assembly Mecha base Spring holder...
Page 19
3.2.7 Removing the side (L) (See Fig.12 to 14) (1) Remove the two screws J attaching the side (L). (See Fig.12) (2) From the side of body, remove the spacer fixing the tray switch board and motor board. Disconnect connector on the tray switch board and detach the side (L) upward.
Page 20
3.2.8 Removing the side (R) assembly (See Fig.15 to 19) (1) Remove the three screws L attaching the side (R) assem- bly. (See Fig.15) (2) Remove the spring attached to part g of the hook on the right side of the body. (See Fig.16) (3) Push and release the two tabs h of the gear cover through the notches inside the side (R) assembly.
Page 21
1 gear Side (R) assembly Spring Sprihg Elevator cam Gear cover Fig.18 Elevator com Fig.16 Side (R) assembly Side (R) assembly Fig.19 Fig.17 (No.MB570)1-21...
Page 22
3.2.9 Removing the lifter assembly (See Fig.20 to 24) (1) From top of the body, turn the 1 gear clockwise to move the 1 gear 2 gear lifter assembly upward. (See Fig.20) (2) From top of the body, turn 2 gear clockwise to move the hook toward the front until it stops.
3.2.10 Removing the rack holder assembly / sensor assembly (See Fig.25 to 30) Attention: If the slide gear of the body places at joint u of the rack holder assembly, turn the 1 gear counterclockwise to move the slide gear toward the front. Remove the rack holder assembly. (1) Remove the three screws N attaching the rack holder as- sembly.
3.2.11 Removing the motor (See Fig.31 and 32) Attention: You need not to remove the tray assembly, and in such case, move it. (1) Remove the two belts on top of the body. (2) Remove the two screws S attaching the motor. (3) Remove the motor from the bottom of the body.
3.2.12 Taking out the disc in play mode (See Fig.33 to 36) Attention: Tray stopper Refer to "Removing the tray assembly". Main tray (1) Remove the top cover upward. (2) Unlock the tray assembly and draw out the tray assembly toward the front.
Page 28
Subwoofwer (SP-PWC90) 3.3.1 Removing the amplifier assembly (See Figs.1 to 3) (1) From the back side of the speaker main body, remove three screws A attaching the amplifier assembly. (See Fig.1.) (2) From the bottom side of the speaker main body, remove the eight screws B attaching amplifier assembly.
Page 29
3.3.2 Removing the rear panel (See Figs.4 and 5) • Prior to performing the following procedure, remove the ampli- fier assembly. (1) From the back side of the amplifier assembly, remove the six screws C and screw D attaching the rear panel. (See Fig.4.) (2) Take out the rear panel with fan motor backward from the amplifier assembly.
Page 30
3.3.4 Removing the power board (See Figs.7 to 9) • Prior to performing the following procedures, remove the am- plifier assembly and rear panel. CN101 Power cord CN151 Power board (1) From the top side of the amplifier assembly, disconnect the CN103 wires from the connectors (CN103, CN151) on the power board.
Page 31
3.3.5 Removing the relay board (See Fig.10) • Prior to performing the following procedure, remove the ampli- fier assembly. Parallel wire CN352 (1) From the top side of the amplifier assembly, disconnect the Wire clamp parallel wire from the connector CN352 on the relay board.
Page 32
3.3.6 Removing the heat sink (See Figs.11 and 13) • Prior to performing the following procedures, remove the am- plifier assembly, rear panel, power board and relay board. IC bracket Heat sink (1) From left side of the amplifier assembly, remove the three screws K attaching the IC bracket to the heat sink.
Page 33
3.3.7 Removing the amplifier board (See Fig.14) • Prior to performing the following procedures, remove the am- plifier assembly, rear panel, power board, relay board and heat Main board sink. (1) From the top side of the amplifier assembly, disconnect the amplifier board from the connectors (CN311, CN312) on the main board.
Page 34
3.3.9 Removing the power transformer (See Fig.16) • Prior to performing the following procedure, remove the ampli- fier assembly. CN102 Trans board (1) From the top side of the amplifier assembly, disconnect the wire from the connector CN102 on the trans board. (2) Remove the parallel wire from the wire clamp.
Page 35
Subwoofer (SP-PWC60) 3.4.1 Removing the amplifier assembly (See Figs.1 to 3) (1) From the back side of the speaker main body, remove two screws A attaching the amplifier assembly. (See Fig.1.) (2) From the bottom side of the speaker main body, remove the eight screws B attaching amplifier assembly.
Page 36
3.4.2 Removing the rear panel (See Figs.4 and 5) • Prior to performing the following procedure, remove the ampli- fier assembly. (1) From the back side of the amplifier assembly, remove the six screws C and screw D attaching the rear panel. (See Fig.4.) (2) Take out the rear panel with fan motor backward from the amplifier assembly.
Page 37
3.4.3 Removing the fan motor (See Fig.6) • Prior to performing the following procedures, remove the am- plifier assembly and rear panel. (1) From the front side of the rear panel, remove the two screws E attaching the fan motor. (2) Take out the fan motor.
Page 38
3.4.5 Removing the amplifier board (See Fig.9) (1) Remove the three screws H attaching the amp board. (2) Remove the six screws J attaching the amp board with heat sink. Heat sink amp board Fig.9 3.4.6 Removing the power transformer (See Fig.10) (1) Remove the four screws K attaching the power transform- Fig.10...
SECTION 4 ADJUSTMENT ATTENTION IN SERVICE OF DVD SECTION (1) When pickup, Flash ROM ,DVD module board were changed, initialize EEPROM by all means. (2) When full initialization was excuted, excute learning with a DVD test disc by all means. Test disc : VT-501, VT-502 Learning method : It is adjusted automatically by normal playback of a DVD disc.
Page 40
4.2.3 PROCESS Below, FL (LCD) display to operation and communication with a DVD back end micon are shown. * Since the number of beams changes with sets about FL (LCD) display, also set differing from the contents of specification to O.K. * Since there are arrangement and a relation of existence with a set also about a key, also set differing from the contents of specifica- tion to O.K.
Page 41
FL (LCD) indication STEP OPERATION MOVEMENT REMARKS 1 2 3 4 5 6 7 8 9 Press 10 at 10 key of remocon. DVD-DL (parallel, opposite), Upper:0x00-0x06 (Measured position with VT-501) Serch & jitter measurement of the Lower:Jitter value specified position of DVD-SL. Press STOP key of main unit/ Disc stop, LD-OFF.
Page 42
4.3.4 ROM correction (Mecha micon) Processing FL indication Display (OSD) indication Remarks TOC READ "READING_" NOW READING TOC reading DATA READ "READING_" VERSION UP DISC Disc data reading "READING_" SYSCON UPG MODE Indicate firm current versin. CURRENT VERSION Only [POWER] [OPEN/CLOSE] key of a main unit is validated. READING..
SECTION 5 TROUBLESHOOTING This service manual does not describe TROUBLESHOOTING. (No.MB570)1-43...
Page 44
Victor Company of Japan, Limited Audio/Video Systems Category 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan (No.MB570) Printed in Japan...
Page 45
SCHEMATIC DIAGRAMS DVD DIGITAL CINEMA SYSTEM TH-C90A,TH-C90US,TH-C90UX,TH-C90UG TH-C60US,TH-C60UP,TH-C60UW TH-C60UX,TH-C60UY,TH-C60UG CD-ROM No.SML200609 SP-THC90F SP-THC90F SP-THC60F SP-THC60F SP-THC60S SP-PWC90 SP-PWC60 SP-THC90S SP-THC90S SP-THC90C SP-THC60C XV-THC90 XV-THC60 Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) Contents...
Page 46
In regard with component parts appearing on the silk-screen printed side (parts side) of the PWB diagrams, the parts that are printed over with black such as the resistor ( ), diode ( ) and ICP ( ) or identified by the " " mark nearby are critical for safety.
Page 54
Mic input section TO MAIN PWB CN455 OF LVS10488-002A (SHEET 2/6) LVA10635-A1 FOR U Seri.With MIC. CN701 QGF1205F1-07 LVA1706-A3 D7501 MIC JACK PWB R7501 1SS355-X MIC AMP MIC IN 1 J7001 11.0V QNS0266-001 C7101 R7103 IC701 C7401 RC4580ID-X R7401 5.4V C7604 R7602 0.47/10...
Page 58
Speaker primary section for TH-C60 TO CN272 TO CN271 FAN MOTOR QAR0377-001 CN372 QGB2510K2-09 CN274 QGA3901C1-02 CN371 QGA2501C1-02 CN501 NOTES:UNLESS OTHERWISE SPECIFIED QGB2510K2-14 R3720 Q3704 ALL RESISTANCE VALUES ARE IN OHMS. KTC2026/Y/ FAN MOTOR STOP DETECTOR 19.7V ALL INDUCTANCE VALUES ARE IN H. 19.7V 1/4W ALL CAPACITANCE VALUES ARE IN...
Page 59
Speaker amplifier section for TH-C60 *1 MARK R2101 R2401 R2501 R2212 R2312 R2612 VERSION (SW) (SR) (SL) OTHER 6.2k 4.3k C20/C30/C40 J/C IC202 IC201 *2 MARK C2701 C2705 VERSION C2703 C2706 C50/C60 J/C 100/63 OTHER 100/50 *3 MARK R2723 VERSION B2021 R2702 C2708...
Page 64
Printed circuit boards Main board Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) (Main board) (Operation board) C4962 R4882 CN401 EP401 CN404 R4893 CN403 CN402 C4091 C4002 C4006 R4091 C4032 B4001 C4019 R4191 C4021 C4031 D4092...
Page 65
Audio board Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) (Audio & Digital input board) (Mic jack board) C7902 R7602 C7603 C7402 B7071 C7202 CN102 R7402 C7201 R2558 R2551 C2551 R7202 C1101 R1101 R7903 C7602 TPR1...
Page 66
DVD board Loader board Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) K454 K455 IC301 CN201 forward side CN452 CN453 IC201...
Page 67
Speaker board for TH-C90 Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) C736 C738 C717 D722 C741 C735 C733 R102 R753 FC101 FC102 R754 R742 R734 C154 C162 R751 C727 R741 C714 R733 D713 CN151 R731...
Page 68
Speaker board for TH-C60 Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) C2503 C3203 Q3202 Q3201 C3202 C3403 R3206 Q3401 Q3402 C2603 C3402 R3210 R3209 R3212 R3205 R3202 R3406 C3201 R3413 R3412 R3405 R3402 R3204 D3202...
Page 70
Victor Company of Japan, Limited Audio/Video Systems Category 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan Printed in Japan (No.MB570SCH)
PARTS LIST TH-C90A,TH-C90US,TH-C90UX,TH-C90UG TH-C60US,TH-C60UP,TH-C60UW TH-C60UX,TH-C60UY,TH-C60UG * All printed circuit boards and its assemblies are not available as service parts. - Contents - 3- 2 Exploded view of general assembly and parts list (Block No.M1) 3- 6 Speaker assembly and parts list(Subwoofer) (Block No.M2) (TH-C90) 3- 8 Speaker assembly and parts list(Subwoofer) (Block No.M3) ( TH-C60)
Exploded view of general assembly and parts list Block No. USB jack board Operation board Bracket board...
Page 73
Main board Connection board Audio & Digital input board Bracket board Bracket board Front board...
Page 74
General Assembly Block No. [M][1][M][M] Symbol No. Part No. Part Name Description Local LV11209-005A FRONT PANEL C90A,C60UP,C60UW,C60UY LV11209-004A FRONT PANEL C90US,C90UX,C90UG,C60US,C60UX,C60UG LV22243-001A FRONT LENS LV34588-001A VOL RING QYSDSF2608ZA TAP SCREW M2.6 x 8mm LV22242-001A BUTTON(DISC) LV42851-006A FL SCREEN LV36581-001A POWER BTN ASSY LV30227-045A SPACER...
Page 75
Symbol No. Part No. Part Name Description Local QUQV10-0507CJ-E FFC WIRE 5pin 7cm QUQV10-2807CJ-E FFC WIRE 28pin 7cm QUQV10-1807CJ-E FFC WIRE 18pin 7cm QUQV10-1715CJ-E FFC WIRE 17pin 15cm QUQV10-2507CJ-E FFC WIRE 25pin 7cm VYSH101-009 SPACER (x2) QWTJA09-030 GLASS TUBE WHITE(x2) ...
Speaker assembly and parts list Block No. TH-C90 (Subwoofer) Amp. board Trans board Main board Power board Relay board LED board The parts without symbol number are not service.
Page 77
Speaker(Subwoofer) (TH-C90) Block No. [M][2][M][M] Symbol No. Part No. Part Name Description Local LV11059-001A CHASSIS BASE LV30225-0T9A SPACER (x2) QYSBSG3008EA TAP SCREW M3 x 8mm(x6) LV30225-0U9A SPACER (x3) LV21942-002A HIAT SINK LV35739-002A IC BRACKET LV36234-001A H/S BRACKET LV44170-001A COOLING RUBBER LV44170-002A COOLING RUBBER LV30227-004A...
Speaker assembly and parts list Block No. TH-C60 (Subwoofer) Amp. board Mother board LED board The parts without symbol number are not service.
Page 79
Speaker(Subwoofer) (TH-C60) Block No. [M][3][M][M] Symbol No. Part No. Part Name Description Local LV10875-002A CHASSIS BASE LV30225-0T5A SPACER LV30225-0T6A SPACER LV10951-201A HEAT SINK QYSBSG3010EA TAP SCREW M3 x 10mm(x3) QYSBSG3016EA TAP SCREW M3 x 16mm(x4) QYSBSG3010EA TAP SCREW M3 x 10mm(x9) QQT0482-003 POWER TRANSF C60US,C60UW,C60UX,C60UY,C60UG...
DVD mechanism assembly and parts list Block No. Grease FXL-D20-1C =JVG-31N =JVS-1003 =1401C < Back side > 7.0mm 0.2mm The parts without symbol number are not service. 3-10...
Page 81
DVD mechanism Block No. [M][J][M][M] Symbol No. Part No. Part Name Description Local LV22234-001A TM.CHASSIS LV22294-001A C.SPINDLE BASE QYSDST2005ZA TAP SCREW M2 x 5mm(x2) LV36791-001A C.G.S.HOLDER QYSDST2005ZA TAP SCREW M2 x 5mm LV44041-002A GUIDE SHAFT LV44479-001A BAR SPRING LV22236-001A FEED HOLDER QAR0165-001 FEED MOTOR...
DVD changer mechanism assembly and parts list Block No. FMU-SB1-1C Grease =JVG-31N =JVS-1003 CH6-BASE-1M The parts without symbol number are not service. 3-12...
Page 83
DVD changer mechanism Block No. [M][K][M][M] Symbol No. Part No. Part Name Description Local LV10913-007A LOADER ASSY QVY0027-B14 S V RESISTOR QYSDST2004ZA TAP SCREW M2 x 4mm QAR0164-001 MOTOR (x2) LV42340-001A MOTOR PULLEY (x2) LV41431-002A BELT (x2) QYSPSPU1725NA SCREW M1.7 x 2.5mm(x2) QYSDST2605ZA TAP SCREW...
4700pF 1kV K IC901 MIP4170MDSLJ SW-IC C909 QCZ0131-331 C CAPACITOR 330pF 2kV K C910 NDC31HJ-120X C CAPACITOR 12pF 50V J Q951 2SC3576-JVC-T TRANSISTOR C913 QCZ0403-221 C CAPACITOR 220pF 2kV K Q953 KTA1267/YG/-T TRANSISTOR C914 QEZ0658-476Z E CAPACITOR 47uF 50V M...
Page 85
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C4171 NCB30JK-105X C CAPACITOR 1uF 6.3V K R983 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J C4172 NCB30JK-105X C CAPACITOR 1uF 6.3V K R984 NRSA63J-243X MG RESISTOR 24kΩ...
Page 86
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C60US, CN450 QGF1036C2-17 CONNECTOR FFC/FPC (1-17) C60UP, CN451 QGF1205C2-07 CONNECTOR FFC/FPC (1-7) C60UW, C90US, R4763 NRSA63J-273X MG RESISTOR 27kΩ 1/16W J C60UX, C90UX, C60UY, C90UG,...
Page 87
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C2514 NCB21CK-224X C CAPACITOR 0.22uF 16V K D511 SLR-343VC/NPQ-T LED C2515 NCB31CK-393X C CAPACITOR 0.039uF 16V K D551 SELU2E10C-P C2516 NCB31CK-393X C CAPACITOR 0.039uF 16V K D2921 MTZJ11C-T2...
Page 88
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C90US,C90UX, R1145 NRSA63J-104X MG RESISTOR 100kΩ 1/16W J C7402 QER61AM-336Z E CAPACITOR 33uF 10V M C90UG,C60US, R1146 NRSA63J-104X MG RESISTOR 100kΩ 1/16W J C60UX,C60UG R1149 NRSA63J-102X...
Page 89
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R2503 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J C90US,C90UX, R7401 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J C90UG,C60US, R2504 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J C60UX,C60UG R2505 NRSA63J-102X...
Page 90
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C90US,C90UX, Q705 KTA1504/YG/-X TRANSISTOR J7002 QNS0266-001 JACK C90UG,C60US, Q706 KTC2028/Y/ TRANSISTOR C60UX,C60UG Q708 KTC2028/Y/ TRANSISTOR JS541 QSW1059-001 JOG VOLUME Q710 KRC102S-X DIGI TRANSISTOR K6001 NQR0007-002X FERRITE BEADS...
Page 91
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local D702 1SS133-T2 SI DIODE C503 QETN1HM-106Z E CAPACITOR 10uF 50V M D704 1SS133-T2 SI DIODE C504 NCB31HK-102X C CAPACITOR 1000pF 50V K D705 1SS133-T2 SI DIODE...
Page 92
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C3263 NCB31HK-102X C CAPACITOR 1000pF 50V K C3687 NCB31HK-223X C CAPACITOR 0.022uF 50V K C3266 QFZ0212-105Z MM CAPACITOR 1uF 100V J C3688 NCB31HK-223X C CAPACITOR 0.022uF 50V K...
Page 93
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R536 NRSA63J-103X MG RESISTOR 10kΩ 1/16W J R730 NRSA63J-223X MG RESISTOR 22kΩ 1/16W J R541 NRSA63J-103X MG RESISTOR 10kΩ 1/16W J R731 NRS125J-4R7X MG RESISTOR 4.7Ω...
Page 94
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R3355 NRSA63J-132X MG RESISTOR 1.3kΩ 1/16W J R3892 NRSA63J-150X MG RESISTOR 15Ω 1/16W J R3362 QRE141J-390Y C RESISTOR 39Ω 1/4W J R3893 NRSA63J-150X MG RESISTOR 15Ω...
Page 95
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local WC310 QZW0112-001 WIRE CLAMP C1211 NCB31HK-152X C CAPACITOR 1500pF 50V K WC351 QZW0112-001 WIRE CLAMP C1212 QETN1HM-105Z E CAPACITOR 1uF 50V M X601 QAX0246-001Z C RESONATOR...
Page 96
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C1822 QETN1CM-107Z E CAPACITOR 100uF 16V M R1309 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W J C1823 NCB31CK-105X C CAPACITOR 1uF 16V K R1311 NRSA63J-101X MG RESISTOR 100Ω...
Page 97
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R1621 NRSA63J-333X MG RESISTOR 33kΩ 1/16W J Q3702 RT1P141C-X DIGI TRANSISTOR R1624 NRSA63J-224X MG RESISTOR 220kΩ 1/16W J Q3703 RT1N241C-X DIGI TRANSISTOR R1626 NRSA63J-332X MG RESISTOR...
Page 98
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C522 QETN1HM-106Z E CAPACITOR 10uF 50V M C3401 NCB31HK-152X C CAPACITOR 1500pF 50V K C523 QETN1EM-476Z E CAPACITOR 47uF 25V M C3404 QETN1HM-225Z E CAPACITOR 2.2uF 50V M...
Page 99
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local R2205 NRSA63J-563X MG RESISTOR 56kΩ 1/16W J R2712 NRSA63J-562X MG RESISTOR 5.6kΩ 1/16W J R2206 QRZ0224-R22 EMIT RESISTOR 0.22Ω R2713 NRSA63J-562X MG RESISTOR 5.6kΩ...
Page 100
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local CN272 QGB2510J1-09 CONNECTOR B-B (1-9) C101 NCF31EZ-104X C CAPACITOR 0.1uF 25V Z CN273 QGB2510J1-14 CONNECTOR B-B (1-14) C102 NCF31EZ-104X C CAPACITOR 0.1uF 25V Z CN274 QGA3901C1-02 CONNECTOR...
Page 101
Symbol No. Part No. Part Name Description Local Symbol No. Part No. Part Name Description Local C374 NCF31EZ-104X C CAPACITOR 0.1uF 25V Z R251 NRS125J-R39X MG RESISTOR 0.39Ω 1/2W J C375 NCF31EZ-104X C CAPACITOR 0.1uF 25V Z R259 NRSA63J-103X MG RESISTOR 10kΩ...
Page 102
DVD loading board Symbol No. Part No. Part Name Description Local Block No. [0][7] R726 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J R727 NRSA63J-471X MG RESISTOR 470Ω 1/16W J Symbol No. Part No. Part Name Description Local R728 NRSA63J-471X MG RESISTOR 470Ω...
Packing materials and accessories parts list Block No. (TH-C90) No additional / supplemental order of WARRANTY CARDs are available. A1, A2, A3, A5, A6, A11,A12 A19, A20, A21, A22, 3-34...
Page 105
Packing and Accessories (TH-C90) Block No. [M][4][M][M] Symbol No. Part No. Part Name Description Local LVT1504-010A INST BOOK C90A LVT1504-005B INST BOOK C90US,C90UX,C90UG LVT1504-006A INST BOOK CHI(PEKIN) C90US LVT1504-007B INST BOOK ARA PER C90UX,C90UG QAM0216-001 VIDEO CABLE QMPH010-183-JD POWER CORD(EU) 1.83m BLACK C90A ...
Packing materials and accessories parts list Block No. (TH-C60 (Except TH-C60UP)) A1, A2, A3, A5, A6 A18, A19, A20, A21, P28 A26 P21 A16 3-36...
Page 107
Packing and Accessories (TH-C60 (Except TH-C60UP)) Block No. [M][5][M][M] Symbol No. Part No. Part Name Description Local LVT1504-005B INST BOOK C60US,C60UX,C60UG LVT1504-008A INST BOOK ENG POR C60UW LVT1504-009A INST BOOK C60UY LVT1504-006A INST BOOK CHI(PEKIN) C60US LVT1504-009A INST BOOK C60UW LVT1504-007B INST BOOK...
Packing materials and accessories parts list Block No. (TH-C60UP) No additional / supplemental order of WARRANTY CARDs are available. A1, A3, A4, A6, A7,A11 A18, A19, A20, A21, P28 A26 P21 A16 3-38...
Page 109
Packing and Accessories (TH-C60UP) Block No. [M][6][M][M] Symbol No. Part No. Part Name Description Local LVT1504-012A INST BOOK QAM0216-001 VIDEO CABLE QMPS200-190-JC POWER CORD(EU) 1.9m BLACK QAL0457-001 ANT.WIRE QAL0014-003 AM LOOP ANT RM-STHC60J REMOTE CONTROL UNIT --------------- BATTERY (x2) A 10 LE40796-001A...