Table of Contents
Advertisement
SERVICE MANUAL
System
Laser: Semiconductor laser
Channel coverage:
PAL/SECAM (B/G, D/K, I, L)
VHF: E2 to E12, R1 to R12, F2 to F10, Italian
A to H, Ireland A to J, South Africa 4 to 13/
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69/CATV: S01 to S05, S1 to S20,
France B to Q/HYPER: S21 to S41
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances.
Video reception: Frequency synthesizer system
Audio reception: Split carrier system
Aerial out: 75-ohm asymmetrical aerial socket
Timer: Clock: Quartz locked/Timer indication:
24-hour cycle (digital)/Power back-up
duration: 1 hour
Video recording format: MPEG Video
Audio recording format/applicable bit
rate: Dolby Digital 2 ch/256 kbps
RDR-HX510
SPECIFICATIONS
Inputs and outputs
LINE 2 OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 2 IN/LINE 4 IN
(AUDIO): Phono jack/2 Vrms/more than
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 1 - TV : 21-pin
CVBS IN/OUT
S-Video/RGB OUT (upstream)
LINE 3/DECODER: 21-pin
CVBS IN/OUT
S-Video/RGB IN
S-Video OUT (downstream)
Decoder
DIGITAL OUT (OPTICAL): Optical output jack/
–18 dBm (wave length: 660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, P
/C
, P
/C
):
B
B
R
R
Phono jack/Y: 1.0 Vp-p, P
/C
: 0.7 Vp-p,
B
B
P
/C
: 0.7 Vp-p
R
R
RMT-D217P
AEP Model
UK Model
General
Power requirements: 220-240 V AC,
50/60 Hz
Power consumption: 52 W
Dimensions (approx.): 430 × 65 × 328 mm
(width/height/depth) incl. projecting parts
Hard disk drive capacity: 80 GB
Mass (approx.): 4.8 kg
Operating temperature: 5°C to 35°C
Operating humidity: 25% to 80%
Supplied accessories:
Audio/video cord (1) (UK model only)
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to change
without notice.
Compatible colour systems
This recorder is designed to record using the PAL
colour system and play back using the PAL or
NTSC colour systems.
The signals of the SECAM colour system can be
received or recorded but played back in the PAL
colour system only. Recording of video sources
based on other colour systems cannot be
guaranteed.
DVD RECORDER
Advertisement
Table of Contents
Related Manuals for Sony RMT-D217P
Summary of Contents for Sony RMT-D217P
- Page 1 RDR-HX510 RMT-D217P SERVICE MANUAL AEP Model UK Model SPECIFICATIONS System Inputs and outputs General Laser: Semiconductor laser LINE 2 OUT Power requirements: 220-240 V AC, Channel coverage: (AUDIO): Phono jack/2 Vrms/10 kilohms 50/60 Hz (VIDEO): Phono jack/1.0 Vp-p Power consumption: 52 W PAL/SECAM (B/G, D/K, I, L) Dimensions (approx.): 430 ×...
- Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
-
Page 3: Table Of Contents
TABLE OF CONTENTS SERVICE NOTE 2-9. HDD ················································································ 2-6 2-10. RD-053 BOARD ····························································· 2-6 DISK REMOVAL PROCEDURE IF THE TRAY 2-11. D. C. FAN ········································································ 2-7 CANNOT BE EJECTED (FORCED EJECTION) ············ 5 2-12. ER-038 BOARD ······························································ 2-7 2-13. AV-089 BOARD ······························································ 2-8 GENERAL 2-14. - Page 4 • SWITCHING REGULATOR (SRV1614EK) SCHEMATIC DIAGRAM ···························· 4-51 4-3. PRONTED WIRING BOARDS • RD-053 (HOST GLUE, DV I/F CONTROL) PRINTED WIRING BOARD ······················· 4-53 IC PIN FUNCTION DESCRIPTION 5-1. IT CONTROL IC (IC604: M306H3MC-058FPUO (AV-089 BOARD)) ········································································ 5-1 SERVICE MODE 6-1.
-
Page 5: Service Note
SERVICE NOTE 1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) Remove the upper case. Remove the RD-053 board, RD bracket. IInsert the stiff wire in the hole and eject the tray. Tray The hole Fig. 1 The stiff wire Fig. - Page 6 MEMO — 6 —...
-
Page 7: General
Copyrights done at the discretion of Sony. All Should any solid object or liquid fall permanent damage to your contents of the hard disk drive will •... -
Page 8: Quick Guide To Disc Types
Quick Guide to Disc Types Recordable and playable discs Recording Features Editing Features Icon used in Formatting Compatibility with other DVD Type Disc Logo Auto Manual Record Change Delete this manual (new discs) players (finalizing) Rewrite A-B Erase Playlist Chapter Chapter 16:9 sizes title name... -
Page 9: Hookups And Settings
Step 2: Connecting the Aerial Cable Hookups and Settings Connect the aerial cable by following the steps below. Do not connect the mains lead until you reach Hooking Up the Recorder “Step 5: Connecting the Mains Lead” on page 18. Follow steps 1 to 7 to hook up and adjust the settings of the recorder. - Page 10 -/-- Digital Theater Systems, Inc. t TV/VIDEO Notes • If the supplied remote interferes your other Sony DVD recorder or player, change the command mode number to mains for this recorder (page 21). • Use the batteries correctly to avoid possible leakage and corrosion.
-
Page 11: Connecting A Vcr Or Similar Device
The t TV/VIDEO button switches between the SETUP remote to one that differs from the other Sony Number buttons recorder and the last input source selected on the DVD recorder or player. -
Page 12: Connecting To A Satellite Or Digital Tuner
Connecting to the LINE 2 IN or LINE 4 IN jacks Connecting to a Satellite or Digital Tuner Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If the Connect a satellite or digital tuner to this recorder using the LINE 3/DECODER jack. -
Page 13: Seven Basic Operations - Getting To Know Your Dvd
Select “System,” and press ENTER. To return to the previous step Formatting a DVD disc (Disc Info) Press O RETURN. Seven Basic Operations Settings - Channel Setting Prog. 6 — Getting to Know Your DVD Recorder System : Notes - RW - RW Video Normal / CATV :... -
Page 14: Playing The Recorded Programme (Title List)
About the Teletext function Select a title, and press ENTER. Title List with Thumbnail Images (Example: 3. Playing the Recorded DVD-RW in VR mode) Some broadcasts systems ensure a Teletext The sub-menu appears. service* in which the complete programmes and The sub-menu displays options applicable Programme (Title List) their data (title, date, channel, recording start time... -
Page 15: Changing The Name Of A Recorded Programme
Press </M/m/, to select the character To use the number buttons Example: When playing a VIDEO CD 5. Changing the Name of a you want to enter, and press ENTER. You can also use the number buttons to enter Playing time and number of the current characters. -
Page 16: Timer Recording
Recording mode Recording time (hours) Unfinalizing a disc Timer Recording DVD* - RW - RW Video HQ (High quality) Before Recording For DVD-RWs (Video mode) R 25 1 hr. 30 min. DVD-RW (Video mode) that have been finalized SP (Standard mode) 33 to prohibit additional recording or editing can be Before you start recording…... -
Page 17: Checking/Changing/Cancelling Timer Settings
To use the PDC/VPS function To extend the recording duration time while Select “OK,” and press ENTER. Recording TV programmes using Set “PDC/VPS” to “On” in step 2 above. recording The date, start and stop times, programme When you turn on this function, the recorder starts the VIDEO Plus+ system position, recording mode, etc. -
Page 18: Recording From Connected Equipment
: Indicates the setting that the Update When the timer settings overlap Automatically erasing old titles Recording From Connected function is set for. The programme that starts first has priority and the second programme starts recording only after the (Auto Title Erase) Equipment When all of the timer settings do not fit on the first programme has finished. -
Page 19: Playback
“PCM” in “Audio” setup. possible damage to the audio system, the consumer * TVS was developed by Sony to produce home surround sound with just a stereo • The volume may be reduced when surround effects are should take proper precautions when the analogue set. -
Page 20: Searching For A Title/Chapter/Track, Etc
Press </, to adjust the setting, and “Audio Filter”: Selects the digital filter to Notes Adjusting the picture quality • Paused titles are not saved to the HDD. press ENTER. reduce noise above 22.05 kHz (Fs* is 44.1 • This function is cancelled when: kHz), 24 kHz (Fs is 48 kHz), or 48 kHz (Fs is The default settings are underlined. -
Page 21: Playing Mp3 Audio Tracks Or Jpeg Image Files
To change the slideshow speed Selecting an MP3 album or track Selecting a JPEG album or image Playing MP3 Audio Tracks Press TOOLS while the album list or image list is displayed to select “Slideshow Speed,” and press or JPEG Image Files Press TITLE LIST. -
Page 22: Erasing And Editing
To create and edit Playlist titles Notes • The Playlist title calls up data from the original titles for Erasing and Editing a Title A Playlist is a group of Playlist titles created from playback. When an original title is used for a Playlist Erasing and Editing the original title for editing purposes. -
Page 23: Creating And Editing A Playlist
Select a title by pressing </,, and Select the IN point by pressing m/M, Erasing all titles on the disc Creating and Editing a press ENTER. and press ENTER. The display for selecting titles to be erased The display for setting the end point (OUT) Playlist - RW - RW... -
Page 24: Dubbing
Rec Mode Conversion Dubbing Move Required times for High-speed Dubbing from Dubbing HDD to DVD (for 60-minute programme) - RW - RW - RW Video Titles containing “Copy-Once” copy protection Speed 2.4x signals can be moved only from HDD to DVD- Allows you to dub from the HDD to a DVD or vice - RW - RW... -
Page 25: Settings And Adjustments
Press M/m repeatedly until the channel you Press PROG +/– to select the programme Receivable channels position. want is displayed, then press ENTER. TV system Channel coverage Settings and Adjustments The channels are scanned in the order shown Selected programme position in the table below. -
Page 26: Video Settings (Video)
Press M/m repeatedly until the programme 16:9 Language Video Settings (Video) position of the station that carries a time signal appears, and press ENTER. OSD (On-Screen Display) Settings - Clock Video settings will adjust items related to the Switches the display language on the screen. Auto Adjust : image, such as size and colour. -
Page 27: Recording And Parental Control Settings (Features)
Audio Connection • DTS (DVD VIDEO only) Note Recording and Parental The actual chapter mark interval may vary depending on Selects whether or not to output DTS signals. The following setup items switch the method of the amount of information contained in the video to be outputting audio signals when you connect a Control Settings (Features) recorded. -
Page 28: Easy Setup (Resetting The Recorder)
Mode switch on the remote to the setting made , Noises may appear in the pictures recorded on Power here. For details, see “If you have a Sony DVD the HDD, which is due to the characteristics of SETUP player or more than one Sony DVD recorder” on HDD, and is not a malfunction. -
Page 29: Self-Diagnosis Function
“WELCOME” appears in the front panel display. remove the disc and leave the recorder turned on , Contact your Sony dealer or local authorized combination of a letter and four numbers appears for about half an hour until the moisture in the front panel display. -
Page 30: Guide To Parts And Controls
• Do not expose the disc to direct sunlight or heat Specifications sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. System • After playing, store the disc in its case. Laser: Semiconductor laser •... -
Page 31: Glossary
Front panel Front panel display DVD RW NICAM PROGRESSIVE SMARTLINK A HDD/DVD indicators F Displays the following (35): Displays the selected media and the • Playing time/remaining time A [/1 (on/standby) button (22) I z REC button (31) • Current title/chapter/track/index number playing/recording/dubbing status. -
Page 32: Language Code List
Language Code List For details, see page 80. The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona 1032 Afrikaans... -
Page 33: Disassembly
RDR-HX510 SECTION 2 DISASSEMBLY NOTE: The following flow chart shows the disassembly procedure. Upper case (Page 2-2) ER-038 board RD-053 board Tray cover assembly D.C. Fan (Page 2-7) (Page 2-2) (Page 2-6) (Page 2-7) Front panel section DVD section HDD section (Page 2-3) (Page 2-4) (Page 2-5) -
Page 34: Upper Case
NOTE: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE 3 Three tapping screws (+BV 3 × 10) 4 Upper case 1 Tapping screw 2 Tapping screw 2-2. TRAY COVER ASSEMBLY 4 Tray cover assembly The hole 3 Two dowels 2 Open the tray 1 The stiff wire... -
Page 35: Front Panel Section
2-3. FRONT PANEL SECTION 1 Seven dowels 2 Front panel section 2-4. SLIDE DOOR 2 Slide door 1 Four dowels... -
Page 36: Board, Fl-144 Board
2-5. FR-226 BOARD, FL-144 BOARD 7 Connector (CN302) 9 FL-144 board 6 Two tapping screws (+BV 3 × 8) 3 Dowel 4 Flexible flat cable 8 FL cover (FAF-001) (CN101) 5 FR-226 board 1 Flexible flat cable 2 Three tapping screws (FFL-002) (+BV 3 ×... -
Page 37: Dvd Drive
2-7. DVD DRIVE 4 Flexible cover 5 Harnesses (PD-133) 8 Two foots 6 Two tapping screws (+BV 3 × 3) 9 DVD drive 7 MD bracket ( L) 3 MD bracket (R) 2 Two tapping screws (+BV 3 × 3) 1 Flexible flat cable (FRD-001) 2-8. - Page 38 2-9. HDD 1 Two tapes 3 Flexible flat cable (FRH-001) 2 CN243 board 7 HDD base 4 Harnesses (PH-068) 6 Harnesses (HE-001) 5 Four screws 2-10.RD-053 BOARD 1 Flexible flat cable (FRD-001) (CN602) 3 Connector (CN901) 4 Tapping screw (+BV 3 × 8) 2 Flexible flat cable (FRH-001) (CN603) 5 TU shield bracket...
-
Page 39: Board
2-11.D. C. FAN 3 D.C. Fan 2 Two tapping screws (+BV 3 × 10) 1 Connector (CN1201) 2-12.ER-038 BOARD 4 ER-038 board 3 Flexible flat cable (FAE-007) (CN105) 1 Four tapping screws (+P 3 × 10) 2 Flexible flat cable (FAE-007) (CN106) - Page 40 2-13.AV-089 BOARD 1 Two tapping screws (+BV 3 × 8) 2 RD bracket 3 Connector (CN120) 5 Harnesses (AL-071) (CN701) 4 Connector (CN3) 7 Tree tapping screws (+BV 3 × 8) 0 AV-89 board 9 Six tapping screws (+BV 3 × 10) 8 Screw (+B 3 ×...
-
Page 41: Circuit Boards Location
2-14.CIRCUIT BOARDS LOCATION Power block CN-243 board ER-036 board FL-144 board AV-089 board RD-053 board FR-226 board... - Page 42 MEMO 2-10E...
- Page 79 RDR-HX510 SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. IT CONTROL IC (IC604: M306H3MC-058FPUO (AV-089 BOARD)) Pin No. Pin Name Function GRADE Fixed at “L” SIRCS Remote control signal input AV_LINK_IN AV LINK signal input FLD_DATA Output of FLD data signal FLD_IN Fixed at “L”...
- Page 80 Pin No. Pin Name Function FLD_CS Output of FLD driver chip select signal LED_STB Output of FLD driver storove signal AREA0 Fixed at “H” AREA1 Fixed at “H” IMUTE Not used FL_PCONT Output of FLD DC/DC converter power control signal TU_BST_C2 Not used EEP_WP...
- Page 81 Pin No. Pin Name Function IT_CON_TEMP Terminal control signal input BS_C/N_DET Fixed at “L” AVSS – Analog GND TU_G_MAX Tuner gain detect signal input VREF – Power supply input (Analog 5V) AVCC – Power supply input (Analog 6V) XL3MUTE Not used START Oscillation selection input SYNCIN...
- Page 82 MEMO 5-4E...
-
Page 83: Service Mode
RDR-HX510 SECTION 6 SERVICE MODE This is the diagnostics to define the faulty position. The diagnostics can be executed using the remote commander (Remote Control Mode 3) and monitor. To execute the service mode, connect the VIDEO OUT (L2 OUT) connector to the monitor. Connect the AC power cord to the power outlet. -
Page 84: Screen Transition In The Service Mode
6-2. Screen Transition in the Service Mode Main menu DEVICE TEST menu DEVICE TEST menu << MAIN MENU >> << DEVICE TEST MENU 1/2 >> << DEVICE TEST MENU 2/2 >> 1) DEVICE TEST 1) MS-IF 1) GRIPS2 2) PATH TEST 2) NAZCA 2) GR t>... -
Page 85: Service Mode Menu Items And Description
When the key “9” is pressed down, the monitor display moves MODEL to the hard disk check screen. SYSCON Version [ When the key “8” is pressed down, the monitor display moves SONY ID to the TV guide check screen. HDD Serial ID 6-4. Device Check Menu (1/2) <<... -
Page 86: Hard Disk Check Menu
6-7. Hard Disk Check Menu << HDD MODE >> 1) When the key “1” is pressed down, the ID check will be 1) Indicate ID executed. 2) When the key “2” is pressed down, performance check will be 2) Performance Check executed. -
Page 87: Adjustment
RDR-HX510 SECTION 7 ADJUSTMENT 7-1. Video System Adjustment 7-2. S-Video Output S-Y Check <Purpose> This check confirms that the S-video output. If it adjusted incorrectly, Preparing for Adjustment color will be to dark or too thin. 1. Equipments • Oscilloscope Mode Video level adjustment in test mode •... -
Page 88: S-Video Output S-C Level Check
7-3. S-Video Output S-C Level Check 7-5. Component Video Output B-Y Chec <Purpose> <Purpose> This check confirms that the S-video output S-C conforms to the This check confirms that the B-Y signal of the component video PAL standard. If it is adjusted incorrectly, color will be too dark or output is correct. -
Page 89: Repair Parts List
X-2055-182-1 COVER ASSY, TRAY A-1109-676-A CASE, UPPER (SERVICE) 2-515-217-21 DOOR,SLIDE (G35) 3-077-331-31 +BV3 (3-CR) X-2055-185-1 PANEL ASSY, FRONT(AEP) 1-479-289-11 REMOTE COMMANDER (RMT-D217P) X-2055-186-1 PANEL ASSY, FRONT(UK) 3-071-119-91 LID, BATTERY (FOR RMT-D217P) 3-070-883-41 SCREW, TAPPING 7-685-533-14 SCREW +BTP 2.6X6 TYPE2 N-S... -
Page 90: Dvd Drivr And Hdd
8-1-2. DVD DRIVE AND HDD supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-087-675-01 6-32UNCX5 2-159-921-11 COVER, FLEXIBLE 3-089-380-01 DAMPER 1-797-247-11 DRIVE, DVD DRW-V35P 2-159-920-01 SCREW, HDD DAMPER 1-830-665-11 CABLE, FLEXIBLE FLAT (FRD-002) 1-829-812-11 CABLE, FLEXIBLE FLAT (FRH-001) -
Page 91: Chassis Section
8-1-3. CHASSIS SECTION supplied supplied supplied supplied supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 0 110 * 101 A-1109-483-A FR-226 (AS) COMPL 1-468-922-11 POWER BLOCK 3-077-331-01 +BV3 (3-CR) A-1122-595-A RD-053 (S) ECES COMPLE (AEP) 1-829-815-11 CABLE, FLEXIBLE FLAT (FAF-001) A-1122-593-A RD-053 (S) CEES COMPLE (UK) 1-829-814-11 CABLE, FLEXIBLE FLAT (FFL-002) -
Page 92: Electrical Parts List
AV-089 8-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH please include the board name. parts list may be different from the parts specified in the diagrams or the components •... - Page 93 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C458 1-115-416-11 CERAMIC CHIP 0.001uF C721 1-126-947-11 ELECT 47uF C459 1-100-927-21 CERAMIC CHIP 0.001uF 630V C722 1-125-837-91 CERAMIC CHIP 6.3V C502 1-162-970-11 CERAMIC CHIP 0.01uF C724 1-162-927-11 CERAMIC CHIP 100PF C605 1-107-826-11 CERAMIC CHIP...
- Page 94 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC > Q315 6-550-280-01 TRANSISTOR BC857CE6327 Q316 8-729-421-19 TRANSISTOR UN2213 IC101 6-703-758-01 IC PQ050DZ01ZPH Q401 6-550-286-01 TRANSISTOR BC847CE6327 IC102 6-706-740-01 IC BA00BC0WFP-E2 Q402 8-729-421-22 TRANSISTOR UN2211 IC105 6-706-725-01 IC PQ070XZ02ZPH Q403...
- Page 95 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R151 1-216-206-00 RES-CHIP 2.2K 1/8W R322 1-216-823-11 METAL CHIP 1.5K 1/10W R152 1-216-833-11 METAL CHIP 1/10W R323 1-218-871-11 METAL CHIP 0.5% 1/10W R156 1-216-295-91 SHORT CHIP R324 1-218-871-11 METAL CHIP 0.5% 1/10W...
- Page 96 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R614 1-216-833-11 METAL CHIP 1/10W R706 1-216-845-11 METAL CHIP 100K 1/10W R620 1-216-813-11 METAL CHIP 1/10W R707 1-216-864-11 SHORT CHIP R629 1-216-817-11 METAL CHIP 1/10W R711 1-216-851-11 METAL CHIP 330K 1/10W R630...
- Page 97 AV-089 CN-243 ER-036 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1621 1-216-839-11 METAL CHIP 1/10W C111 1-107-826-11 CERAMIC CHIP 0.1uF R1622 1-216-833-11 METAL CHIP 1/10W C112 1-107-826-11 CERAMIC CHIP 0.1uF R1634 1-216-809-11 METAL CHIP 1/10W C113 1-107-826-11 CERAMIC CHIP 0.1uF...
- Page 98 ER-036 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C307 1-162-924-11 CERAMIC CHIP 56PF FB116 1-469-796-21 FERRITE C308 1-165-908-11 CERAMIC CHIP FB117 1-469-796-21 FERRITE C309 1-107-826-11 CERAMIC CHIP 0.1uF FB118 1-469-796-21 FERRITE C310 1-124-779-00 ELECT CHIP 10uF FB119 1-469-796-21 FERRITE...
- Page 99 ER-036 FL-144 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R124 1-216-801-11 METAL CHIP 1/10W R225 1-216-864-11 SHORT CHIP R126 1-216-801-11 METAL CHIP 1/10W R226 1-216-864-11 SHORT CHIP R128 1-216-801-11 METAL CHIP 1/10W R228 1-216-864-11 SHORT CHIP R130 1-216-849-11 METAL CHIP 220K...
- Page 100 FL-144 FR-226 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < TORANSISTOR > < JAMPER > Q1303 8-729-901-88 TRANSISTOR 2SC2411K-CR JR101 1-216-296-11 SHORT CHIP Q1304 8-729-901-88 TRANSISTOR 2SC2411K-CR JR102 1-216-295-91 SHORT CHIP JR103 1-216-296-11 SHORT CHIP <...
- Page 101 FR-226 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < TRANSISTOR > C119 1-125-777-11 CERAMIC CHIP 0.1uF C120 1-125-777-11 CERAMIC CHIP 0.1uF Q101 8-729-027-43 TRANSISTOR DTC114EKA-T146 C121 1-125-777-11 CERAMIC CHIP 0.1uF Q102 6-550-280-01 TRANSISTOR BC857CE6327 C122 1-125-777-11 CERAMIC CHIP 0.1uF...
- Page 102 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C332 1-107-826-11 CERAMIC CHIP 0.1uF C643 1-125-777-11 CERAMIC CHIP 0.1uF C333 1-107-826-11 CERAMIC CHIP 0.1uF C644 1-125-777-11 CERAMIC CHIP 0.1uF C334 1-107-826-11 CERAMIC CHIP 0.1uF C645 1-125-777-11 CERAMIC CHIP 0.1uF C335 1-107-826-11 CERAMIC CHIP...
- Page 103 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C832 1-125-777-11 CERAMIC CHIP 0.1uF C1219 1-164-943-11 CERAMIC CHIP 0.01uF C833 1-125-777-11 CERAMIC CHIP 0.1uF C1220 1-126-208-21 ELECT CHIP 47uF C834 1-125-777-11 CERAMIC CHIP 0.1uF C1221 1-164-943-11 CERAMIC CHIP 0.01uF C835 1-125-777-11 CERAMIC CHIP...
- Page 104 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks IC109 6-706-007-01 IC HY57V561620CTP-HDR R158 1-218-990-11 SHORT CHIP IC110 6-703-875-01 IC CDCVF2505PWR R159 1-218-961-11 RES-CHIP 4.7K 1/16W IC201 6-705-297-01 IC MBM29Z0003PCN-KE1 R161 1-218-965-11 RES-CHIP 1/16W IC202 6-705-297-01 IC MBM29Z0003PCN-KE1 R162 1-218-957-11 RES-CHIP 2.2K...
- Page 105 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R348 1-218-938-11 RES-CHIP 1/16W R674 1-218-990-11 SHORT CHIP R353 1-218-937-11 RES-CHIP 1/16W R675 1-218-933-11 RES-CHIP 1/16W R354 1-218-938-11 RES-CHIP 1/16W R676 1-218-933-11 RES-CHIP 1/16W R355 1-218-938-11 RES-CHIP 1/16W R677 1-218-933-11 RES-CHIP...
- Page 106 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R850 1-218-958-11 METAL CHIP 2.7K 1/16W R1417 1-218-941-81 RES-CHIP 1/16W R851 1-218-990-11 SHORT CHIP R1419 1-218-941-81 RES-CHIP 1/16W R852 1-218-957-11 RES-CHIP 2.2K 1/16W R1424 1-216-864-11 SHORT CHIP R853 1-218-965-11 RES-CHIP 1/16W...
- Page 107 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R3080 1-218-937-11 RES-CHIP 1/16W R3631 1-218-933-11 RES-CHIP 1/16W R3081 1-218-961-11 RES-CHIP 4.7K 1/16W R3637 1-218-965-11 RES-CHIP 1/16W R3082 1-218-938-11 RES-CHIP 1/16W R3638 1-218-965-11 RES-CHIP 1/16W R3083 1-218-965-11 RES-CHIP 1/16W R3639 1-218-965-11 RES-CHIP...
- Page 108 RD-053 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R3849 1-218-965-11 RES-CHIP 1/16W RB332 1-234-378-21 RES, NETWORK 10K (1005X4) R3850 1-218-965-11 RES-CHIP 1/16W RB333 1-234-714-11 RES, NETWORK 56 (1005X4) R3851 1-218-977-11 RES-CHIP 100K 1/16W RB334 1-234-714-11 RES, NETWORK 56 (1005X4) RB335 1-242-963-21 RES, NETWORK 33...
-
Page 109: Power Supply Block
1-234-369-21 RES, NETWORK 10 (1005X4) ******************************** RB902 1-234-369-21 RES, NETWORK 10 (1005X4) RB903 1-234-370-21 RES, NETWORK 22 (1005X4) 1-479-289-11 REMOTE COMMANDER (RMT-D217P) RB904 1-234-370-21 RES, NETWORK 22 (1005X4) 1-575-131-82 CORD, POWER(AEP) RB905 1-234-370-21 RES, NETWORK 22 (1005X4) 1-827-269-11 CORD, POWER(UK) - Page 110 2-589-942-91 MANUAL, INSTRUCTION (FINNISH)(AEP) 3-071-119-91 LID,BATTERY (for RMT-D217P) * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *...
- Page 111 RDR-HX510 Sony Corporation 2005D1600-1 Home Electronics Network Company 9-874-868-11 ©2005.4 — 150 — Published by Quality Assurance Dept.