Color Balance Adjustment - Toshiba e-STUDIO6520C Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO6520C:

Table of Contents

Color balance adjustment

The color balance is adjusted by adjusting the density of each color. The adjustment is performed by

selecting its density area from the following: low density, medium density and high density.

Be sure that this adjustment be made after performing

adjustment".

Changing the adjustment setting influences the adjacent density area slightly.

E.g.: When the value of the medium density is larger, the adjacent areas in the low density

and high density range will become slightly darker.

The procedure is the same as that of

The color from the 1st to the 7th stage (low density), from the 8th to the 11th stage (medium density)

and from the 12th to the 13th stage (high density) in "Patch chart for gamma adjustment ([71] [FAX])"

output in "3.3.1Automatic gamma adjustment" can be used as a guide for the range of the density area

influenced by the adjustment with the printer driver and the change of the adjustment value (low

density, medium density, high density (Refer to P.3-50 "Fig. 3-24").

P.3-49 "3.3.2 Gamma balance adjustment (Black Mode)".

The larger the

value is, the darker

the color to be

adjusted becomes.

values: 0 to 255

(Default: 128)

The larger the

value is, the darker

the color to be

adjusted becomes.

values: 0 to 255

(Default: 128)

P.3-47 "3.3.1 Automatic gamma

e-STUDIO5520C/6520C/6530C

Show Quick Links

Table of Contents

E-studio5520c E-studio6530c