Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Canon imagePRESS C7000 Series
Summary of Contents for Canon imagePRESS C7000 Series
-
Page 1: Service Manual
Service Manual imagePRESS C7000 Series Operator Maintenance Sep 26 2008... - Page 3 Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.
- Page 4 Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems.
- Page 5 Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer- ence to the timing of operation. In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the direction of the electric signal.
-
Page 7: Table Of Contents
Contents Contents Chapter 1 Operator Maintenance 1.1 Outline ................................1- 1 1.1.1 Operator Maintenance ..........................1- 1 1.2 Operator Maintenance Mode ........................1- 1 1.2.1 Overview ..............................1- 1 1.2.2 Type of Mode............................1- 1 1.2.3 Function..............................1- 3 1.3 Installation................................ 1- 3 1.3.1 Installation Procedure (Operator maintenance mode for Main machine UI)........ -
Page 9: Operator Maintenance
Chapter 1 Operator Maintenance... - Page 11 Contents Contents 1.1 Outline ................................... 1-1 1.1.1 Operator Maintenance .................................. 1-1 1.2 Operator Maintenance Mode ............................1-1 1.2.1 Overview ...................................... 1-1 1.2.2 Type of Mode ....................................1-1 1.2.3 Function......................................1-3 1.3 Installation ..................................1-3 1.3.1 Installation Procedure (Operator maintenance mode for Main machine UI)................1-3 1.3.2 Installation Procedure (Operator maintenance mode for imagePRESS Server) ................
-
Page 13: Operator Maintenance Mode
Chapter 1 1.1 Outline 1.1.1 Operator Maintenance 0018-5820 imagePRESS C7000VP / imagePRESS C6000VP The operator maintenance means some parts of replacement of the periodically replaced parts/durables and consumables, maintenance such as cleaning, and image adjustment performed by the user that have been conventionally performed by the service technician at the user's site. The operator maintenance allows the user to perform maintenance and image adjustment without the need for the visit of the service technician to the user's site, resulting in the reduced downtime of the machine. - Page 14 Operator maintenance mode (for imagePRESS Server) To start the operator maintenance mode for the imagePRESS Server, select [Program] > [Canon OM App] > [Start OM App] in the Windows [Start] menu to start the boot screen, and hold down [Display].
-
Page 15: Function
Chapter 1 Operator Maintenance Operator Maintenance Mode 1.0.0 Copyright CANON INC. 2007 All Rights Reserved English F-1-4 1.2.3 Function 0018-5823 imagePRESS C7000VP / imagePRESS C6000VP The operator maintenance mode contains the following functions, some of which are only for the operator maintenance for the external controller. (See the following table. - Page 16 Chapter 1 1: Enabled -Operator Maintenance Mode > Log display setting Service mode > COPIER > OPTION > BODY > OPLOG-SW (level 2) 0: Hidden (default) 1: Displayed -Switching the display of Operator Maintenance Mode > Parts to be replaced, cleaned (See the list of replacement/cleaning items.) :Parts to be replaced/cleaned for which the operator performs maintenance can be customized depending on the level of operator's technique.
-
Page 17: Installation Procedure (Operator Maintenance Mode For Imagepress Server)
Chapter 1 Additional Functions Common Settings Copy Settings Timer Settings Communications Settings Adjustment/Cleaning Mail Box Settings Report settings Voice Navigation Address Book Settings Settings Operator Maintenance System Settings Mode Done System Monitor F-1-6 2) Enter a password and hold down [OK]. T-1-6 MEMO: A password is necessary to log in to the operator maintenance mode. - Page 18 Chapter 1 T-1-7 Installing the Flash Player To display the installation procedure, Flash Player needs to be installed in an external controller (imagePRESS Server). Depending on the version of external controller, it may not be installed at shipment so that engineers are expected to install the Flash Player in an external controller at installing the operator maintenance as below.
- Page 19 3) Turn on the power of the imagePRESS Server. 4) Select [Program] > [Canon OM App] > [Start OM App] in the Windows [Start] menu to start the boot screen. 5) Select a language on the list box at the lower left of the boot screen and hold down [Diplay].
- Page 20 Chapter 1 Operator Maintenance Operator Maintenance Mode 1.0.0 Copyright CANON INC. 2007 All Rights Reserved English F-1-10 6) Hold down [Login] at the upper right of the login screen. Operator Maintenance<Top page> - Microsoft Internet Explorer Welcome to the Operator Maintenance Mode.
- Page 21 This mode should only be used by those operators who have completed a specific Canon training course on these functions and obtained a training completion certificate. In order to reduce the risk of accidents, injuries and/or damage to the machine, only such trained operators should perform maintenance functions and/or use this mode with respect to this machine.
-
Page 22: Maintenance
Chapter 1 1.4 Maintenance 1.4.1 Overview 0018-5824 imagePRESS C7000VP / imagePRESS C6000VP Maintenances performed by the operator are mainly the replacement *1 and cleaning of the parts. The parts to be replaced and cleaned and its relevant information are listed below. The service technician should perform adjustment (service mode, adjustment after replacement) according to the following list when needed. - Page 23 Chapter 1 Drum patch sensor (Y) FK2-3168 DB1-SW DV-P-S-A Drum patch sensor (M) FK2-3168 DB1-SW DV-P-S-A Drum patch sensor (C) FK2-3168 DB1-SW DV-P-S-A Drum patch sensor (K) FK2-3168 DB1-SW DV-P-S-A Cleaning Drum patch sensor (Y) CLN-SW DV-P-S-A Cleaning Drum patch sensor (M) CLN-SW DV-P-S-A Cleaning Drum patch sensor (C)
- Page 24 Chapter 1 T-1-13 COUNTER Average counter*1 Test (COUNTER) (COUNTER) Parts to be replaced/cleaned Adjustme Remarks ID*3 nt*2 Intermediate Intermediate Sub-item Sub-item item item Drum(Y) DRBL-1 PT-DR-Y AVE-DRB1 PT-DR-Y Drum(M) DRBL-1 PT-DR-M AVE-DRB1 PT-DR-M Drum(C) DRBL-1 PT-DR-C AVE-DRB1 PT-DR-C Drum(K) DRBL-1 PT-DRM AVE-DRB1 PT-DRM...
-
Page 25: Items For Replacement/Cleaning_Transfer
Chapter 1 *2 Adjustment after replacement/cleaning. *3 Test print pattern to output after replacement/cleaning. For the details of the pattern, see the test print ID table. Perform image check with this test print. *4 Perform the adjustment of the height of the primary charging assembly. The service technician performs this operation *5 This pert is assigned to allow operators to replace it on a unit basis depending on operator’s technique level. - Page 26 Chapter 1 T-1-15 COUNTER Average counter*1 Test Adjus (COUNTER) (COUNTER) Parts to be replaced/cleaned Remarks tment Intermediat Intermediate Sub-item Sub-item e item item Intermediate Transfer Belt DRBL-1 TR-BLT AVE-DRB1 TR-BLT ITB Cleaning Brush(x2) DRBL-1 ITB-CLN1 AVE-DRB1 ITB-CLN1 ITB Bias Roller Cleaning Blade(X2) DRBL-1 ITB-BLD1 AVE-DRB1 ITB-BLD1...
-
Page 27: Item For Replacement/Cleaning_Fixing
Chapter 1 1.4.4 Item for Replacement/Cleaning_Fixing 0018-5827 imagePRESS C7000VP / imagePRESS C6000VP T-1-16 Display switching SW (COUNTER) Parts Default (ON, display; OFF, hide) Parts to be replaced/cleaned number200V Intermediate (240V) Sub-item item ASIA ASIA (CCN) (CSPL) Primary Fixing Roller FL2-6945 DB1-SW FX12UP-A Secondary Fixing Roller... - Page 28 Chapter 1 Cleaning Primary fixing thermistor / thermal CLEANING FX1-THTS AVE-CLN FX1-THTS Replace with the Fixing switch Roller Cleaning Secondary fixing thermistor / thermal CLEANING FX2-THTS AVE-CLN FX2-THTS Replace with the Fixing switch Roller Cleaning Primary Fixing Refresh Roller CLEANING FX1-RFRL AVE-CLN FX1-RFRL Cleaning Secondary Fixing Refresh Roller...
-
Page 29: Items For Replacement/Cleaning_Filter
Chapter 1 1.4.5 Items for Replacement/Cleaning_Filter 0018-5828 imagePRESS C7000VP / imagePRESS C6000VP T-1-18 Display switching SW (COUNTER) Parts Default (ON, display; OFF, hide) Parts to be replaced/cleaned number200V Intermediate (240V) Sub-item item ASIA ASIA (CCN) (CSPL) Sub Rear Left Ozone Filter(x2) FC6-8133 PD1-SW FILTER... -
Page 30: Item For Replacement/Cleaning_Others (Separation Pad, Etc.)
Chapter 1 1.4.6 Item for Replacement/Cleaning_Others (Separation pad, etc.) 0018-5829 imagePRESS C7000VP / imagePRESS C6000VP T-1-20 Display switching SW (COUNTER) Parts Default (ON, display; OFF, hide) Parts to be replaced/cleaned number200V Intermediate (240V) Sub-item item ASIA ASIA (CCN) (CSPL) Left deck separation pad (x2) FL2-7257 DB1-SW DECK-PD... -
Page 31: Item For Replacement/Cleaning_Test Print Id Table
Chapter 1 1.4.7 Item for Replacement/Cleaning_Test Print ID Table 0018-5830 imagePRESS C7000VP / imagePRESS C6000VP The following table shows the combination of the test print ID in the list of replacement/cleaning items and the test print in the operator maintenance mode. Follow this table to output a test print and check the image at the time of replacing or cleaning the parts. -
Page 32: Operation Flow For Operator (Normal Operation)
Chapter 1 1.4.8 Operation Flow for Operator (Normal Operation) 0018-5831 imagePRESS C7000VP / imagePRESS C6000VP The following is the flow of maintenance for the operator. Enter the operator maintenance mode and check the parts to be replaced/cleaned on the alarm list F-1-15 1-20... -
Page 33: Operation Flow For Operator (Troubleshooting)
Chapter 1 1.4.9 Operation Flow for Operator (Troubleshooting) 0018-5832 imagePRESS C7000VP / imagePRESS C6000VP The following is the flow of maintenance for the operator in the case of troubleshooting. (Troubleshooting 3) F-1-16 1-21... - Page 35 Sep 26 2008...