Table of Contents
Advertisement
Connecting with wireless LAN
Connecting through the access point
You can make the setting for infrastructure mode
administrator on network settings before changing any settings.
※"Glossary" (See pages 44 - 45)
Projector settings
1
Turn on the projector and press the [NETWORK] button on the remote control.
Select [USER 1]- [USER 3] from [WIRELESS LAN] at the network menu and press
2
the [ENTER] button.
Set the details of network and select [OK].
3
As for network setting items, see pages 29 - 31.
Confirm to your system administrator on network settings before changing any settings.
The projector's MAC address
("Verifying settings"
Computer settings
4
Turn on the computer.
5
Make the network setting according to your system administrator.
When the user does not have the [Admin (administrator)] authority, the [Admin (administrator)]'s name and password are
required to make network settings.
6
Connect to your access point.
Start Wireless Manager ME 4.5, click [Wireless LAN] on the <Network Adapter
7
Selection> window and select the network adapter connected to the access port.
A confirmation message appears asking whether to switch the projector to the network or not. Select [No].
Select the desired projector on the <Select Access Port> window and click [OK].
8
[
] appears in the menu bar and a connection is established with the projector.
("Menu description"
If the projector is not displayed, click [Designate] followed by [ADD], then enter the IP address set in the projector using
the <Access Port Registration> window, and click [REGISTER]. (See page 18)
If you are unable to connect to the wireless LAN through the access point even after performing the steps in "
settings," contact the manufacturer of the access point.
※
(connection through the access point
※
can be checked with [STATUS] in the network menu of the projector unit.
see page 34) ※"Glossary" (See page 44)
See page 21)
(cont.)
15
※
); however, confirm to your system
Projector
Advertisement
Table of Contents
