Table of Contents
Advertisement
RQT8685-2B.fm Page 16 Tuesday, April 25, 2006 9:05 AM
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, consult
your dealer for instructions. (Reference pages are shown in parentheses.)
Power
≥ Insert the AC mains lead securely into the household mains
No power.
socket. (6)
≥ When "AUTO POWER OFF" is set to "ON", the unit
The unit is
automatically
automatically switches to standby after approximately 30
switched to the
minutes in the stop mode. (15)
standby mode.
No operation
≥ This unit cannot play discs other than the ones listed in
No response
these operating instructions. (4)
when any buttons
≥ The unit may not be operating properly due to lightning,
pressed.
static electricity or some other external factor. Turn the unit
off and then back to ON. Alternatively, turn the unit off,
disconnect the AC mains lead, and then reconnect it.
≥ Condensation has formed: Wait 1 to 2 hours for it to
evaporate.
≥ Check that the batteries are installed correctly. (6)
No response
≥ The batteries are depleted: Replace them with new ones. (6)
when remote
≥ Point the remote control at the remote control sensor and
control buttons
operate. (8)
pressed.
≥ When operating the On-Screen Menus, even if the items are
lined up vertically, select the item with [2 1] and then set
the item using [3 4].
≥ Check the video or audio connection. (5, 6)
No picture or
≥ Check the power or input setting of the connected equipment.
sound.
≥ Check that the disc has something recorded on it.
≥ While stopped, remove the disc, and then press and hold
You have forgotten
your ratings
[1] (PLAY) and [<OPEN/CLOSE] on the unit and then also
password.
press and hold [Í/I] on the unit until "INITIALIZED"
Reset all the settings
disappears from the television. Turn the unit off and on
to Factory Preset.
again. All settings will return to the default values.
Specific operation impossible or incorrect
≥ Play may take time to begin when an MP3 track has still
It takes time
picture data. Even after the track starts, the correct play time
before play starts.
will not be displayed, however this is normal.
≥ These functions do not work with some DVD-Videos.
The program play
function do not
work.
≥ Press [∫] twice and then press [1] (PLAY).
Menu doesn't
appear. [VCD] with
playback control
≥ If a disc contains CD-DA and other formats, proper playback
Play doesn't start.
16
may not be possible.
≥ Display the subtitles. (12)
No subtitles.
≥ Clear the subtitles. (12)
The subtitles
overlap closed
captions recorded
§1
on discs.
≥ The end of an item becomes point B when it is reached.
In A-B Repeat,
point B is
automatically set.
≥ A-B Repeat is canceled when you press [QUICK REPLAY].
Repeat play is
≥ Repeat play may be canceled when you press [M.SKIP] or
automatically
canceled.
[CM SKIP].
Picture incorrect
≥ Ensure that the unit is not connected through a video
Picture distorted.
cassette recorder. (5)
≥ Make sure that progressive output has not been selected
when the connected television is not progressive compatible.
Press and hold [RETURN] until the picture displays correctly.
The settings will return to "INTERLACE".
≥ Change "TV ASPECT" in "VIDEO" tab. (14)
Picture size
≥ Use the television to change the aspect. If your television
doesn't fit the
does not have that function, change "TV ASPECT". (14)
screen.
≥ Change the Zoom setting. (10)
≥ Set "Transfer Mode" to "AUTO". (13)
When playing PAL
disc, picture
distorted.
[Unit\with\PX\printed\on\the\outer\packaging]
The television
≥ PAL discs cannot be played.
may display
[The\United\Kingdom,\Asia,\Australia\and]N.Z.]
incorrectly or
≥ The unit and television are using different video systems.
colours appear
[Asia] Use a multi-system or NTSC television.
faded.
[The\United\Kingdom,\\Australia\and]N.Z.]
Use a multi-system or PAL television.
[The\United\Kingdom,\Asia,\Australia\and]N.Z.]
≥ The system used on the disc doesn't match your television.
–PAL discs cannot be correctly viewed on an NTSC
television.
–This unit can convert NTSC signals to PAL60 for viewing on
a PAL television ("NTSC DISC OUT" in "VIDEO" tab). (14)
≥ Restore the zoom ratio to "NORMAL". (10)
Menu not
displayed
≥ Change "TV ASPECT" in "VIDEO" tab. (14)
correctly.
- Quick Links:
- Step 1 Connection to a Television
Hide quick links:
Advertisement
Table of Contents
