Page 1: User Manual
Please read this manual carefully before using this product and save this manual for future use. In particular, be sure to read "1.1.1 For Your Safety (Page 14)" before using this product. KX-NS1000: PCMPR Software File Version 003.00000 or later...
Page 2: Features
IP Communication Easy Operation This PBX supports IP communication using If you are using a certain Panasonic telephone a variety of IP telephones, such as the KX-NT300/ that is equipped with a Navigator Key/Jog Dial KX-NT500 series with Self Labelling and/or...
Page 3 Feature Highlights Wireless System Built-in Unified Messaging This PBX optionally supports a Portable Station You can set incoming calls to be redirected (PS) system. PSs can be used in the PBX to your mailbox to let callers leave voice with other wired telephones. messages when you are unable to answer the phone.
Page 4 Feature Highlights CA Call Accounting This application can calculate call cost estimates and track call activity for calls that are made through the PBX. Installing the CA Call Accounting web server software allows you to access CA Call Accounting from any PC by using a web client.
Page 5 • Some optional hardware, software, and features are not available in some countries/areas, or for some PBX models. Please consult your certified Panasonic dealer for more information. • This manual provides basic information on how you can access commonly used PBX functions with proprietary telephones (PTs), single line telephones (SLTs), portable stations (PSs), SIP phones, SIP-CS compatible Portable Stations (S-PSs), and DSS Consoles.
Page 6 Feature Highlights To execute certain operations, you may be required to press the ENTER button on a KX-UT series SIP phone or the CALL button (soft button) on an S-PS during the operation. The following 5 operations are examples. [Examples] To select an idle outside line automatically PT/SLT/PS /SIP Extn./S-PS For KX-UT series:...
Page 7 Feature Highlights To establish a conference call For KX-UT series: Press ENTER. KX-UT series/S-PS During a conversation For S-PS: Press CALL. desired phone no. C.Tone C.Tone Press CONFERENCE. Dial desired phone Talk to the Press CONFERENCE. Talk with multiple new party. parties.
Page 8: Open Source Software
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ® Panasonic Corporation is under licence. • All other trademarks identified herein are the property of their respective owners. •...
Page 9: Table Of Contents
Table of Contents Table of Contents 1 Operation ....................13 Before Operating the Telephones .................14 1.1.1 For Your Safety ......................14 1.1.2 Important Safety Instructions ..................19 1.1.3 Precautions ........................20 1.1.4 Data Security ........................22 1.1.5 Before Operating the Telephones ..................23 Making Calls ........................33 1.2.1 Basic Calling ........................33 1.2.2...
Page 10 Table of Contents 1.8.5 Transferring Calls ......................161 1.8.6 Other Features ......................169 1.8.7 Quick Reference ......................186 Setting the Telephone According to Your Needs ............189 1.9.1 Setting the Alarm (Timed Reminder) ................189 1.9.2 Refusing Incoming Calls (Do Not Disturb [DND]) ............191 1.9.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA) ..........................195 1.9.4...
Page 11 Table of Contents 2.1.3 Restriction Level Control (Dial Tone Transfer) .............263 2.1.4 Turning on the External Background Music (BGM) ............264 2.1.5 Recording Outgoing Messages (OGM) ................265 2.1.6 Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out) .....267 2.1.7 Releasing Network Direct Station Selection (NDSS) Monitor ........268 Configuring Unified Messaging Features ..............269 2.2.1...
Page 12 Table of Contents User Manual...
Page 13: Operation
Section 1 Operation This section shows you step by step how to use each feature. Read this chapter to become familiar with the many useful features of this PBX. User Manual...
Page 14: Before Operating The Telephones
1.1.1 For Your Safety 1.1 Before Operating the Telephones 1.1.1 For Your Safety To prevent personal injury and/or damage to property, be sure to observe the following safety precautions. The following symbols classify and describe the level of hazard and injury caused when this unit is operated or handled improperly.
Page 15 1.1.1 For Your Safety WARNING For All Telephone Equipment • Do not allow rain to fall on the product or expose the product to moisture. Do not let water, oils, or other liquids to splash onto the product. Such conditions can lead to fire or electric shock, and may impair the performance of the product.
Page 16 • Do not attempt to repair the power cord or plug. If the power cord or plug is damaged or frayed, contact an authorised Panasonic Factory Service Centre for a replacement. • When mounting the PBX on a 19-inch rack, only use the 19-inch rack mounting equipment (attachment bracket, screws) included with the PBX.
Page 17 1.1.1 For Your Safety CAUTION For All Telephone Equipment • The product should be kept free of dust, moisture, high temperature (more than 40 °C), and vibration, and should not be exposed to direct sunlight. • Unplug the product from the wall outlet before cleaning. Wipe the product with a soft cloth. Do not clean with abrasive powders or with chemical agents such as benzine or thinner.
Page 18 Contact your telephone company. If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the outside lines until it has been serviced by an authorised Panasonic Factory Service Centre. Note For All Telephone Equipment •...
Page 19: Important Safety Instructions
1.1.2 Important Safety Instructions 1.1.2 Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Do not use the product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
Page 20: Precautions
1.1.3 Precautions 1.1.3 Precautions For users in the European Union only Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
Page 21 1.1.3 Precautions • The SLT ports are not specifically designed for 3-wire-connected equipment. 3-wire-connected equipment might not respond to incoming ringing when attached to these ports. User Manual...
Page 22: Data Security
1.1.4 Data Security 1.1.4 Data Security In order to use the PBX safely and correctly, the Security Requirements below must be observed. Failure to do so may result in: • Loss, leakage, falsification or theft of user information. • Illegal use of the PBX by a third party. •...
Page 23: Before Operating The Telephones
Single Line Telephone (SLT) (e.g., rotary pulse telephone) Which features are available depend on the type of telephone being used. If you are using a Panasonic telephone with a special feature button such as or a display or both, you can follow the operations using the buttons or displayed messages for easy programming.
Page 24: Your Extension Number
Tone?" (Appendix). Display In this manual, "the display …" refers to the display of a Panasonic telephone. If your telephone is not a Panasonic display telephone, the message will not be displayed. If you use a Panasonic display telephone, the display helps you confirm the settings. Some telephones also give you easy access to features. Messages are displayed according to the feature used.
Page 25 (Level decreases) (Level decreases) Examples The displays and the illustrations shown as examples are from a telephone connected to the KX-NS1000. Restrictions Some features may be restricted at your extension depending on system programming and the type of telephone being used.
Page 26 When You Use a Panasonic Proprietary Telephone or KX-UT Series SIP Phone Panasonic proprietary telephones and KX-UT series SIP phones have useful feature buttons that simplify some operations. For details, refer to the "Location of Controls" or equivalent section in the documentation for your phone.
Page 27 1.1.5 Before Operating the Telephones – – Single-CO (S-CO) Headset – – Wrap-up – – One-touch Dialling Call Park – – Log-in/Log-out Call Park (Automatic Park Zone) – For S-PS users: • The following buttons can be customised: – – Single-CO (S-CO) –...
Page 28 1.1.5 Before Operating the Telephones Button Feature Conference Used to establish a multiple party conversation. Used to disconnect the current call and make another call without hanging Terminate External Feature Access Used to access special features offered by a host PBX or a telephone (EFA) company.
Page 29 1.1.5 Before Operating the Telephones Button Feature Two-way Transfer Used to record a conversation into the mailbox of a specific extension. Used to record a conversation into the mailbox of a specific extension with One-touch Two-way Transfer one touch. Used to monitor your own voice mailbox while an incoming caller is leaving Live Call Screening (LCS) a message and, if desired, intercept the call.
Page 30: How To Follow The Steps
1.1.5 Before Operating the Telephones How to Follow the Steps An example of system operation is shown below. Calling Another Extension Feature title To call an extension (Intercom Call) Telephone types The abbreviations of PT/SLT/PS/SIP Extn./S-PS telephone types are explained in extension no.
Page 31 1.1.5 Before Operating the Telephones Abbreviation Telephone Type S-PS SIP-CS compatible Portable Station (e.g., KX-UDT series) Single Line Telephone (e.g., KX-T7710) User Manual...
Page 32: Connection Example
1.1.5 Before Operating the Telephones Connection Example This diagram shows you a connection example. Telephone Company Pure IP-PBX Built-in Router Private ITSP IP Network Network Fax Machine Router (e.g., ADSL Modem) Printer Remote PC APT DSS Console IP-PT External Sensor IP Softphone, Client PC Doorphone &...
Page 33: Making Calls
1.2.1 Basic Calling 1.2 Making Calls 1.2.1 Basic Calling – Calling Another Extension – Calling an Outside Party – Making a Call to a Private Network (TIE Line Access) – Using an Account Code (Account Code Entry) Calling Another Extension To call an extension (Intercom Call) PT/SLT/PS/SIP Extn./S-PS extension no.
Page 34: Calling An Outside Party
1.2.1 Basic Calling To call an operator (Operator Call) You can call an extension or a group assigned as the operator. PT/SLT/PS/SIP Extn./S-PS Off-hook. Enter 9 or 0. • The operator call number (default) varies depending on country/area. Calling an Outside Party You have to seize an outside line before dialling an outside phone number because external calls are made via your PBX.
Page 35 1.2.1 Basic Calling To select the specified outside line PT/PS/KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS outside (S-CO) phone no. Off-hook. Press S-CO. Talk. Dial outside phone number. • Each of the S-CO button or G-CO button light shows the current status as follows: Off: The line is idle. Red on: The line is in use.
Page 36 1.2.1 Basic Calling • * Which type of telephone number must be entered depends on the settings of your PBX. To call with one touch PT/PS (NDSS) Talk. Off-hook. Press NDSS. • To start monitoring another PBX extension after customising an NDSS button, go off-hook, press the NDSS button, and go on-hook.
Page 37 1.2.1 Basic Calling • A Panasonic proprietary telephone extension user can enter an account code during a conversation and when hearing reorder tone after the other party hangs up. • Account codes may use the digits "0" through "9". •...
Page 38: Easy Dialling
1.2.2 Easy Dialling 1.2.2 Easy Dialling This is convenient for frequently dialled phone numbers. – With a One-touch Button (One-touch Dialling) – Using Numbers Stored at Your Extension (Personal Speed Dialling) – Using Numbers Stored in the PBX (System Speed Dialling) –...
Page 39 1.2.2 Easy Dialling To dial PT/SLT/SIP Extn./S-PS personal speed dialling no. Off-hook. Press AUTO DIAL Enter Dial personal speed or enter dialling number (2 digits). • To call using a directory, refer to "1.14.2 Using the Directories". • For SIP phone and S-PS users: Telephones display only personal speed dialling numbers. Using Numbers Stored in the PBX (System Speed Dialling) You can make calls using speed dialling numbers stored in the PBX.
Page 40 1.2.2 Easy Dialling To set/cancel PT/SLT/PS Cancel C.Tone On-hook. Off-hook. Enter 740. Enter 1 to set or 0 to cancel. To dial PT/SLT/PS Off-hook. • To call another party, dial the desired party’s phone number before the preprogrammed number is dialled. •...
Page 41: Redial
1.2.3 Redial 1.2.3 Redial This is convenient when calling the same outside party again. – Redialling the Last Number You Dialled (Last Number Redial) Redialling the Last Number You Dialled (Last Number Redial) PT/SLT/PS Off-hook. Press REDIAL or enter #. SIP Extn./S-PS REDIAL Press REDIAL.
Page 42: When The Dialled Line Is Busy Or There Is No Answer
1.2.4 When the Dialled Line is Busy or There is No Answer 1.2.4 When the Dialled Line is Busy or There is No Answer – Reserving a Busy Line (Automatic Callback Busy) – Setting Callback on an ISDN Line (Completion of Calls to Busy Subscriber [CCBS]) –...
Page 43 1.2.4 When the Dialled Line is Busy or There is No Answer To answer the callback ringing from an idle outside line PT/SLT/PS While hearing a callback ringing outside phone no. Off-hook. Talk. Dial outside phone number. • If you do not answer the callback ringing within 10 seconds, this feature will be cancelled. To cancel callback ringing (Automatic Callback Busy Cancel) PT/SLT/PS C.Tone...
Page 44 1.2.4 When the Dialled Line is Busy or There is No Answer To answer while hearing a callback ringing PT/SLT/PS Off-hook. To cancel (CCBS Cancel) PT/SLT/PS C.Tone Off-hook. Enter On-hook. • If you do not answer within a specified time period, this feature will be cancelled. •...
Page 45 1.2.4 When the Dialled Line is Busy or There is No Answer Leaving a Message Waiting Indication/Calling Back the Caller Who Left an Indication (Message Waiting) For an extension leaving a message waiting indication When the called extension is busy or does not answer your call, you can leave a notification so that the called party may call you back.
Page 46 1.2.4 When the Dialled Line is Busy or There is No Answer For an extension receiving a message waiting indication To check the left message and call back PT/PS While on-hook Press MESSAGE Off-hook. Talk. until the desired extension appears. To call back PT/SLT/PS Press MESSAGE or enter...
Page 47 1.2.4 When the Dialled Line is Busy or There is No Answer To clear message waiting indications left on your extension PT/SLT/PS/S-PS/SIP Extn. your extension no. C.Tone Enter Enter 0. Dial your Off-hook. On-hook. extension number. • The Message button light or Message/Ringer Lamp shows the current status as follows: Off: No message Red on: You have a message.
Page 48 1.2.4 When the Dialled Line is Busy or There is No Answer To join an intercom call PT/SLT/PS Party joining the call A busy tone is heard and the caller information of the call to another (DSS) extension is displayed. (PDN) C.Tone B.
Page 49 1.2.4 When the Dialled Line is Busy or There is No Answer To talk to each party alternately PT/PS During a conversation To continue Talk to the Press TRANSFER. other party. • You can also deny others the possibility of joining your conversation (Default: Allow). Refer to "1.9.7 Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)".
Page 50 1.2.4 When the Dialled Line is Busy or There is No Answer Monitoring Another Extension (Call Monitor) The preprogrammed extension can monitor another extension. After pressing a DSS button, you can check the caller information of the call to another extension on the display. Then, you can choose to monitor the call, if necessary.
Page 51: Accessing The Isdn Service (Isdn Service Access)
1.2.5 Accessing the ISDN Service (ISDN Service Access) 1.2.5 Accessing the ISDN Service (ISDN Service Access) You can access services provided by the ISDN. To access PT/PS (If all required digits are stored.) (ISDN Service) outside line (Requires to dial service code (ISDN Service) (ISDN Service)
Page 52: Alternating The Calling Method (Alternate Calling-Ring/Voice)
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/Voice) 1.2.6 Alternating the Calling Method (Alternate Calling—Ring/ Voice) The caller can alternate the alerting method, either ring or Ring voice, when making an intercom call. Ring Hello On the other hand, any extension can set the alerting method, either ring or voice, when receiving an intercom call.
Page 53: Calling Without Restrictions
1.2.7 Calling without Restrictions 1.2.7 Calling without Restrictions – Using Your Calling Privileges at Another Extension (Remote COS Access) Using Your Calling Privileges at Another Extension (Remote COS Access) You can use your calling privileges (Class of Service) at another extension. You may override restrictions which have been set.
Page 54: To Access Another Party Directly From Outside (Direct Inward System Access [Disa])
1.2.8 To Access Another Party Directly from Outside (Direct Inward System Access [DISA]) 1.2.8 To Access Another Party Directly from Outside (Direct Inward System Access [DISA]) – Calling through DISA Calling through DISA When outside callers access extensions in the PBX, a prerecorded message greets the caller and gives information about how to access an extension.
Page 55 1.2.8 To Access Another Party Directly from Outside (Direct Inward System Access [DISA]) To call an outside party PIN: Personal Identification Number From Outside Telephone In No Security Mode DISA outside phone no. phone no. R.B.Tone & DISA message Off-hook. Dial DISA Dial outside phone phone number.
Page 56 1.2.8 To Access Another Party Directly from Outside (Direct Inward System Access [DISA]) CAUTION There is a risk that fraudulent telephone calls will be made using the Outside-to-Outside Call feature of DISA. The cost of such calls will be billed to the owner/renter of the PBX. To protect the PBX from this kind of fraudulent use, we strongly recommend: Enabling DISA security (Trunk Security or All Security).
Page 57: Setting Your Telephone From Another Extension Or Through Disa (Remote Setting)
1.2.9 Setting Your Telephone from Another Extension or through DISA (Remote Setting) 1.2.9 Setting Your Telephone from Another Extension or through DISA (Remote Setting) You can set the following features on your telephone from another extension or through DISA. • Call Forwarding (FWD)/Do Not Disturb (DND) •...
Page 58: Receiving Calls
1.3.1 Answering Calls 1.3 Receiving Calls 1.3.1 Answering Calls PT/SLT/PS/SIP Extn./S-PS Off-hook. Talk. Select one of the following methods: · Lift the handset to receive the preferred line. (Default: Ringing line is selected.) · Press the SP-PHONE button. · Press the flashing CO, INTERCOM, ICD Group, PDN, SDN, or DN button directly. ·...
Page 59: Answering Hands-Free (Hands-Free Answerback)
1.3.2 Answering Hands-free (Hands-free Answerback) 1.3.2 Answering Hands-free (Hands-free Answerback) You can answer an incoming call without going off-hook as soon as the line is connected. When an intercom call arrives, you will hear the caller talking without the phone ringing. When an outside call arrives, you will hear the caller talking after a preprogrammed number of rings.
Page 60: Answering A Call Ringing At Another Telephone (Call Pickup)
1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup) 1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup) – Answering a Call from Another Telephone (Call Pickup) – Denying Other People the Possibility of Picking Up Your Calls (Call Pickup Deny) Answering a Call from Another Telephone (Call Pickup) You can answer an incoming call that is ringing at another extension or group from your phone without leaving your desk.
Page 61 1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup) Denying Other People the Possibility of Picking Up Your Calls (Call Pickup Deny) You can deny or allow other people to pick up your calls. PT/SLT/PS/SIP Extn./S-PS Deny C.Tone Allow 720.
Page 62: Answering A Call Via An External Speaker (Trunk Answer From Any Station [Tafas])
1.3.4 Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS]) 1.3.4 Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS]) You can be notified of incoming outside calls through an external speaker. These calls can be answered from any extension.
Page 63: Using The Answer/Release Button
1.3.5 Using the ANSWER/RELEASE Button 1.3.5 Using the ANSWER/RELEASE Button The ANSWER and RELEASE buttons are convenient for operators using headsets. With the ANSWER button, you can answer all incoming calls. With the RELEASE button, you can disconnect the line during or after a conversation, or complete transferring a call.
Page 64: To End A Conversation
1.3.5 Using the ANSWER/RELEASE Button To transfer an outside call to an extension with a one-touch operation During a conversation The called RELEASE (DSS) party answers. Press DSS. Press RELEASE. The other party is placed on hold and the destination extension is called immediately. To end a conversation During a conversation RELEASE...
Page 65: Identifying Malicious Calling Parties (Malicious Call Identification [Mcid])
1.3.6 Identifying Malicious Calling Parties (Malicious Call Identification [MCID]) 1.3.6 Identifying Malicious Calling Parties (Malicious Call Identification [MCID]) You can ask your telephone company to trace a malicious calling party during a conversation or after the calling party hangs up. You will receive the information on the malicious call later on.
Page 66: During A Conversation
1.4.1 Transferring a Call (Call Transfer) 1.4 During a Conversation 1.4.1 Transferring a Call (Call Transfer) – Transferring to an Extension in the PBX – Transferring to an Outside Party Using the PBX Service – Transferring a Call Using the ISDN Service (Call Transfer [CT]—by ISDN) –...
Page 67 1.4.1 Transferring a Call (Call Transfer) During a conversation extension no. C.Tone Press Recall/ Dial Talk. On-hook. hookswitch. extension number. This step can be omitted. SIP Extn./S-PS During a conversation XFER extension no. C.Tone HOLD KX-UT series and S-PS only. Dial extension number.
Page 68: Transferring To An Outside Party Using The Pbx Service
1.4.1 Transferring a Call (Call Transfer) To transfer with one touch (One-touch Transfer) PT/PS/KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS During a conversation with an outside party (DSS) Press DSS. On-hook. Talk. This step can be omitted. • System programming is required to use the One-touch Transfer feature during a conversation with an extension.
Page 69 1.4.1 Transferring a Call (Call Transfer) SIP Extn./S-PS During a conversation XFER outside outside line phone no. C.Tone KX-UT series HOLD and S-PS only. KX-UT series and S-PS: Dial outside phone Talk. On-hook. Seize outside line. Press TRANSFER. number. This step can be omitted Other than KX-UT series and S-PS: (KX-UT series and S-PS only).
Page 70 1.4.1 Transferring a Call (Call Transfer) PT/PS During a conversation phone no. C.Tone Dial phone number. Press Enter Talk. On-hook. TRANSFER. This step can be omitted. During a conversation phone no. C.Tone Press Recall/ Dial phone number. Enter Talk. On-hook. hookswitch.
Page 71: Transferring To An Outside Party Using The Sip Service
1.4.1 Transferring a Call (Call Transfer) Transferring to an Outside Party Using the SIP Service To transfer a call with announcement (Attended Transfer) PT/PS During a conversation outside TRANSFER outside line phone no. C.Tone Press TRANSFER. Seize outside line. Dial outside phone Talk.
Page 72 1.4.1 Transferring a Call (Call Transfer) During a conversation outside phone no. C.Tone Enter #. On-hook. Enter Dial outside phone Press Recall/ hookswitch. number. • The availability of this feature depends on your SIP service provider. • You cannot return to the held call after dialling the destination’s number. Customising Your Phone •...
Page 73: Holding A Call
1.4.2 Holding a Call 1.4.2 Holding a Call – Holding – Holding in a System Parking Zone (Call Park) • For users of non-KX-UT series SIP phones: The holding operation for SIP extension users may differ from the steps in this section, and may vary depending on the type of telephone being used.
Page 74 1.4.2 Holding a Call To retrieve a call (Call Hold Retrieve) PT/SLT/PS At the holding extension (Call Hold Retrieve) (CO) A confirmation tone is heard. Off-hook. Talk. Press flashing CO or INTERCOM, or enter To retrieve an outside call from another extension—only Regular Hold (Call Hold Retrieve–Specified with a held line number) (CO) A confirmation...
Page 75 1.4.2 Holding a Call SIP Extn./S-PS At the holding extension (Call Hold Retrieve) (S-CO) (DN) Off-hook. Talk. HOLD KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS: Press flashing S-CO or DN. Other than KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS: Press HOLD. To retrieve an outside call from another extension—only Regular Hold (Call Hold Retrieve–Specified with a held line number) A confirmation held line no.
Page 76 1.4.2 Holding a Call • For PT users: The CO or INTERCOM button light shows the current status as follows: – Regular Hold mode Flashing green slowly: Your held call Flashing red: Another extension’s held call – Exclusive Call Hold mode Flashing green moderately: Your held call Red on: Another extension’s held call •...
Page 77 1.4.2 Holding a Call PT/PS During a conversation parking zone no. Specified C.Tone Auto On-hook. Press TRANSFER. Enter a specified parking Enter zone number (2 digits) or press to park at an idle parking zone automatically. If you hear a busy tone, enter another parking zone number or press again.
Page 78 1.4.2 Holding a Call • If a call is parked automatically, confirm the parking zone number on the display. • If a call is not retrieved within a specified time, you will hear an alarm as a reminder (Call Park Recall). If an outside call is not answered within a specified time, it is automatically disconnected.
Page 79: Talking To Two Parties Alternately (Call Splitting)
1.4.3 Talking to Two Parties Alternately (Call Splitting) 1.4.3 Talking to Two Parties Alternately (Call Splitting) When talking to one party while the other party is on hold, you can swap the calls back and forth (alternately). • KX-UT series SIP phone and S-PS users: You cannot leave the conversation and let the two remaining parties talk.
Page 80 1.4.3 Talking to Two Parties Alternately (Call Splitting) KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS During a conversation extension no. C.Tone Press HOLD. Dial the other Press HOLD. Talk to the party's extension other party. number. This step can be omitted if Automatic Call Hold is enabled on your telephone. (DN) (S-CO) Press the flashing DN...
Page 81: Answering Call Waiting
1.4.4 Answering Call Waiting 1.4.4 Answering Call Waiting – Answering Call Waiting in the PBX – Answering Call Waiting from the Telephone Company Answering Call Waiting in the PBX During a conversation, a call waiting tone or voice announcement through the speaker or the handset occurs when an outside call has been received or another extension is letting you know a call is waiting.
Page 82 1.4.4 Answering Call Waiting While hearing a tone C.Tone Press Recall/hookswitch. Talk to the Enter new party. KX-UT113/KX-UT123 While hearing a tone C.Tone Press HOLD. Talk to the new party. KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS While hearing a tone (DN) C.Tone (S-CO) Press HOLD. Talk to the new party.
Page 83 1.4.4 Answering Call Waiting 2.1 To disconnect the second call and then talk to the original party PT/PS During a conversation (CO) (ICD Group) (PDN) (SDN) On-hook. Off-hook. Talk to the original party. Press CO, ICD Group, PDN, SDN, or INTERCOM. KX-UT113/KX-UT123 During a conversation On-hook.
Page 84 1.4.4 Answering Call Waiting 2.2 To hold the second call and then talk to the original party After holding it, you can talk to the original party. Then, you can disconnect it and then talk to the new party again. PT/PS During a conversation (CO)
Page 85 1.4.4 Answering Call Waiting KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS During a conversation (DN) (S-CO) Press the flashing DN or S-CO. Press HOLD. Talk to the original party. (DN) (S-CO) On-hook. Off-hook. Press the flashing DN or S-CO. Talk to the new party. During a conversation C.Tone Talk to the Press Recall/...
Page 86: Answering Call Waiting From The Telephone Company
1.4.4 Answering Call Waiting Customising Your Phone • 3.1.2 Settings on the Programming Mode—Call Waiting Tone Type Selection If you select "Tone 1", you will hear the same tone for Call Waiting from an outside party and an extension. If you select "Tone 2", you will hear different tones for Call Waiting from an outside party and an extension.
Page 87: Multiple Party Conversation
1.4.5 Multiple Party Conversation 1.4.5 Multiple Party Conversation – Adding Other Parties during a Conversation (Conference) – Leaving a Conference (Unattended Conference) – Leaving a Conference (Leaving Three-party Conference) – Letting a Third Party Join Your Call (Privacy Release) – Adding a Third Party during a Conversation Using the ISDN Service (Three-party Conference [3PTY]—by ISDN) Adding Other Parties during a Conversation (Conference)
Page 88 1.4.5 Multiple Party Conversation PT/PS During a conversation desired phone no. C.Tone Talk to the Press TRANSFER. Dial desired Press TRANSFER. Enter 3. phone number. new party. Seize an outside line before dialling an outside phone number. Talk with multiple parties. During a conversation desired phone no.
Page 89 1.4.5 Multiple Party Conversation To establish a conference call when receiving a call from an outside party during a two-party conversation PT/PS During a conversation (CO) (PDN) (SDN) Press HOLD. Press CONF Press the flashing Talk to the CO, PDN, or SDN. or TRANSFER.
Page 90 1.4.5 Multiple Party Conversation To add another party on hold to a conference PT/PS During a 3- to 7-party conference (CO) (ICD Group) C.Tone (PDN) Press CONF. Press CONF. Talk with (SDN) multiple parties. Press the flashing CO, ICD Group, PDN, or SDN corresponding to the party on hold.
Page 91 1.4.5 Multiple Party Conversation To disconnect one party and then talk to the other in a three-party conversation PT/PS During a conversation (CO) (ICD Group) (PDN) Press TRANSFER once Press FLASH/RECALL.* Talk. (SDN) or twice to establish a conversation with the party to be disconnected.
Page 92 1.4.5 Multiple Party Conversation Leaving a Conference (Unattended Conference) The person who originated a conference can leave the conference, and allow the other parties to continue the conversation. • KX-UT series SIP phone and S-PS users: If you originated a conference, you cannot leave the conference and allow the other parties to continue the conversation.
Page 93 1.4.5 Multiple Party Conversation Customising Your Phone • 3.1.3 Customising the Buttons Create or edit a Conference button. User Manual...
Page 94 1.4.5 Multiple Party Conversation Leaving a Conference (Leaving Three-party Conference) The person who originated a conference with two other parties can leave the conference, and allow the other parties to continue the conversation. To leave a conference involving at least one other extension PT/SLT/PS/KX-UT series/S-PS During a three-party conference On-hook.
Page 95 1.4.5 Multiple Party Conversation Letting a Third Party Join Your Call (Privacy Release) You can let a third party join your current outside call and establish a three-party conversation. You can also leave the conversation and then let the two other parties talk.
Page 96 1.4.5 Multiple Party Conversation PT/PS During a conversation desired phone no. C.Tone Enter Talk to the Press TRANSFER. Dial desired Press TRANSFER. phone number. new party. Seize an outside line before dialling an outside phone number. C.Tone Enter 3. Talk with multiple parties. During a conversation desired phone no.
Page 97 1.4.5 Multiple Party Conversation To complete a conversation PT/SLT/PS During a conversation On-hook. Customising Your Phone • 3.1.3 Customising the Buttons Create or edit an ISDN-Hold button. User Manual...
Page 98: Mute
1.4.6 Mute 1.4.6 Mute You can disable the microphone or the handset to consult privately with others in the room while listening to the other party on the phone through the speaker or the handset. To set/cancel PT/KX-UT series During a conversation VOICE CALL MUTE Press MUTE.
Page 99: Letting Other People Listen To The Conversation (Off-Hook Monitor)
1.4.7 Letting Other People Listen to the Conversation (Off-hook Monitor) 1.4.7 Letting Other People Listen to the Conversation (Off-hook Monitor) You can let other people in the room listen to the conversation through the speaker while continuing the conversation using the handset. To set/cancel PT/KX-UT series During a conversation using the handset...
Page 100: Using The Headset (Headset Operation)
1.4.8 Using the Headset (Headset Operation) 1.4.8 Using the Headset (Headset Operation) You can have a conversation using a headset. In this case, you must select "Headset on" in programming mode or set the Headset button on (red) in advance. However, for the KX-UT113/KX-UT123 and S-PS, Headset mode is enabled automatically when a headset is connected to the headset jack of the telephone.
Page 101 1.4.8 Using the Headset (Headset Operation) • For KX-NT300 series (except KX-NT321)/KX-NT560/KX-DT343/KX-DT346/KX-UT248 telephone users: – With KX-NT300 series (except KX-NT321)/KX-NT560/KX-DT343/KX-DT346/KX-UT248 telephones, you can use a Bluetooth wireless headset registered on your extension as a headset. – Operating Distance Please keep the telephones with connected Bluetooth Modules, 3 m or more apart from each other.
Page 102: Using A Pdn/Sdn Button
1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension 1.5 Using a PDN/SDN Button 1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension Primary Directory Number (PDN) buttons and Secondary Directory Number (SDN) buttons are useful when extension users will handle calls for other extensions. For example, a secretary or multiple secretaries can handle calls and check the call status of a boss or multiple bosses.
Page 103 1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension Light Pattern PDN Button Status SDN Button Status Flashing red The PDN extension is receiving an incoming The corresponding PDN extension is rapidly call to an incoming call distribution (ICD) receiving an incoming call. group.
Page 104 1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension Call Hold and Call Hold Retrieve You can put calls answered with a PDN or SDN button on hold normally (®1.4.2 Holding a Call). You can also retrieve a call held at your extension/another extension with a simple operation, regardless of the call type.
Page 105 1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension Call Transfer Using SDN Button You can transfer a call to a PDN extension with a simple operation using a corresponding SDN button. To transfer a call to a PDN extension PT/PS During a conversation (SDN)
Page 106: Before Leaving Your Desk
1.6.1 Forwarding Calls 1.6 Before Leaving Your Desk 1.6.1 Forwarding Calls – Forwarding Your Calls (Call Forwarding [FWD]) – FWD/DND Settings Using Fixed FWD/DND Button – Forwarding Your Calls Using ISDN Service (Call Forwarding [CF]—by ISDN) Forwarding Your Calls (Call Forwarding [FWD]) You can have your incoming calls forwarded to a specified destination.
Page 107 1.6.1 Forwarding Calls To set/cancel PT/SLT/PS/SIP Extn./S-PS Cancel Both Calls All Calls Outside Calls Busy No Answer Intercom Calls Busy/No Answer Off-hook. Enter Enter 0 to 2 as Enter required you desire. number. For "Cancel", go on-hook directly after entering 0. destination extension no.
Page 108 1.6.1 Forwarding Calls • When using a proprietary telephone, you can set or cancel Call Forwarding by pressing the FWD/DND button (fixed button) instead of " 710". When using a KX-UT series SIP phone (except KX-UT670), you can also press the FWD/ DND button and then press up or down with the Navigator Key to set or cancel Call Forwarding for all calls.
Page 109 1.6.1 Forwarding Calls • The Group FWD button light shows the current status as follows: Off: No set Red on: FWD mode • The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting Mode. Ask your manager what mode your system is in if you are not sure. For KX-UT series SIP phones, only FWD/DND Setting Mode is supported.
Page 110 1.6.1 Forwarding Calls FWD/DND Settings Using Fixed FWD/DND Button Using a proprietary telephone (PT) or KX-UT series SIP phone (except KX-UT670), you can easily switch the FWD/DND status, and set the forward destination for outside/ intercom calls with the FWD/DND button (fixed button). For PT users, it is also possible to set outside telephone numbers (e.g., your cellular phone) as forward destinations for up to 4 Virtual PSs* in an Incoming Call Distribution (ICD) Group, to ring together with other ICD Group members for calls to the group.
Page 111 1.6.1 Forwarding Calls To switch FWD/DND status for intercom calls While on-hook (when in FWD/DND Setting Mode) The current FWD/DND status for intercom calls is displayed. Press the fixed FWD/DND Enter 2. Press the fixed FWD/DND button. button again to switch the status.
Page 112 1.6.1 Forwarding Calls To set and clear FWD/DND for all calls KX-UT113/KX-UT123/KX-UT133/KX-UT136/KX-UT248 While on-hook : FWD/DND off FWD/DND Off : DND on Do Not Disturb destination extension no. FWD(All) : FWD–All Calls FWD(BSY) : FWD–Busy FWD(NA) : FWD–No Answer outside Press the fixed outside line phone no.
Page 113 1.6.1 Forwarding Calls To set forwarding status and outside destinations to ring in parallel for outside calls to an ICD Group While on-hook (when in FWD/DND Setting Mode) Virtual PS 1 Virtual PS 2 Virtual PS 3 Virtual PS 4 Press the fixed Enter 4 to 7.
Page 114 1.6.1 Forwarding Calls Forwarding Your Calls Using ISDN Service (Call Forwarding [CF]—by ISDN) All calls are forwarded to an outside party using ISDN. The following types of call forwarding are provided by the ISDN service. – Unconditional (Call Forwarding Unconditional [CFU]) –...
Page 115: Showing A Message On The Caller's Telephone Display (Absent Message)
1.6.2 Showing a Message on the Caller’s Telephone Display (Absent Message) You can show the reason you do not answer, if the caller uses a Panasonic display proprietary telephone. There are eight preprogrammed messages and one for your personal message (16 characters). The selected message is shown on the display of your telephone.
Page 116 1.6.2 Showing a Message on the Caller’s Telephone Display (Absent Message) • Enter the desired value in the "%" positions. You must enter the correct number of characters as represented by the "%" using 0 to 9 or • The preprogrammed messages can be changed through system programming. •...
Page 117: Preventing Other People From Using Your Telephone (Extension Dial Lock)
1.6.3 Preventing Other People from Using Your Telephone (Extension Dial Lock) 1.6.3 Preventing Other People from Using Your Telephone (Extension Dial Lock) You can lock your extension so that other users cannot make unauthorised outside calls. This feature is also known as Electronic Station Lockout. To lock PT/SLT/PS/SIP Extn./S-PS C.Tone...
Page 118 1.6.3 Preventing Other People from Using Your Telephone (Extension Dial Lock) • After you make an outside call, Extension Dial Lock is automatically activated again. User Manual...
Page 119: Making/Answering An Announcement
1.7.1 Paging 1.7 Making/Answering an Announcement 1.7.1 Paging – Group Paging – Paging and then Transferring a Call Group Paging You can make a voice announcement to proprietary telephones or external speakers or both in the preset group simultaneously. To page PT/SLT/PS/SIP Extn./S-PS paging group Wait for an...
Page 120 1.7.1 Paging Paging and then Transferring a Call PT/SLT/PS During a conversation paging group Dial paging group Enter number (2 digits). Press TRANSFER or Recall/hookswitch. The other party is placed on hold. Wait for an answer. C.Tone On-hook. Talk. Announce. The held party and the paged extension are connected and start a conversation.
Page 121: Answering/Denying A Paging Announcement
1.7.2 Answering/Denying a Paging Announcement 1.7.2 Answering/Denying a Paging Announcement To answer PT/SLT/PS/SIP Extn./S-PS C.Tone Talk. Off-hook. Enter KX-UT series dial key Press any dial key (0–9, , #). Talk. To allow/deny a paging announcement (Paging Deny) PT/KX-UT series Deny C.Tone Allow Off-hook.
Page 122: Making A Conference Group Call
1.7.3 Making a Conference Group Call 1.7.3 Making a Conference Group Call You can call multiple parties, assigned as members of a group (conference group), and establish a multiple party conversation with the called parties. You can make a conference group call to both extensions and outside lines (including analogue lines).
Page 123: Broadcast Mode
1.7.3 Making a Conference Group Call • * If you do not enter an entry code when making the conference group call, extensions/outside telephones can join the conversation without needing to enter an entry code. • Entry codes can consist of the digits "0" through "9". When " " is used for an entry code, no one can join a conversation that is already in progress.
Page 124 1.7.3 Making a Conference Group Call To make/answer a conference group call (for both extension and outside line) PT/SLT/PS/SIP Extn./S-PS Caller conference entry code group no. Off-hook. Enter Dial conference Enter entry code group number (max. 8 digits). (1 digit). Wait for an answer.
Page 125 1.7.3 Making a Conference Group Call To make a conversation with a party in the group’s preassigned order PT/PS During an announcement Press CONF. To end a conversation with a specific party PT/PS During a conversation To end a conversation with a specific party (DSS) Press DSS.
Page 126 1.7.3 Making a Conference Group Call For a called extension To send a notification tone to the caller and join a conversation PT/SLT/PS Called Party During an announcement (DSS) Press DSS corresponding to the caller. Wait for reply. Talk. Press Recall/ hookswitch.
Page 127 1.7.3 Making a Conference Group Call For security reasons, you can set a specific entry code for the conference group call. To join the conversation, extensions/outside telephones have to enter the same entry code. Therefore, you have to inform the parties to be added to the conversation of the entry code in advance.
Page 128 1.7.3 Making a Conference Group Call For an extension joining the conversation To join a conversation with an entry code PT/SLT/PS/SIP Extn./S-PS conference entry code group no. Enter Dial conference Off-hook. Enter entry code Enter #. group number (1 digit). (max.
Page 129: Using The Unified Messaging Features
1.8.1 What is the Unified Messaging system? 1.8 Using the Unified Messaging Features 1.8.1 What is the Unified Messaging system? Introduction to the Unified Messaging system Your PBX can provide you with Unified Messaging system service. You or an outside party can access the Unified Messaging system from a telephone.
Page 130 1.8.1 What is the Unified Messaging system? Prompts Prompts are recorded voice guidance messages that help you set and use Unified Messaging system features. Prompts also help callers when the system is handing their calls. Depending on how your Unified Messaging system is programmed, subscribers and callers can select the language they prefer for system prompts.
Page 131: Logging In To And Configuring Your Mailbox
1.8.2 Logging in to and Configuring Your Mailbox 1.8.2 Logging in to and Configuring Your Mailbox – Logging in to Your Mailbox – Subscriber Tutorial (Easy Mailbox Configuration) – Changing or Deleting Your Personal Greeting Messages – Personal Greetings for Caller ID –...
Page 132 1.8.2 Logging in to and Configuring Your Mailbox Manual log-in PT/SLT/PS/SIP Extn./S-PS (Voice Mail Transfer) Off-hook. Enter #6. UM group’s floating extension no. Press MESSAGE or Voice Mail Transfer, or enter UM group’s floating extension number. your mailbox no. your password Enter your mailbox.
Page 133: Personal Greetings
1.8.2 Logging in to and Configuring Your Mailbox • When following audible prompts only: if Autoplay New Messages is enabled for your mailbox, new messages will be played back automatically each time you log in to your mailbox. Whether or not new messages will be played back one after the other automatically depends on system programming.
Page 134 To start the Subscriber Tutorial PT/SLT/PS/SIP Extn./S-PS The Unified Messaging system will announce, Log in to your mailbox. "Welcome to the Panasonic Unified Messaging System. This is the Subscriber Tutorial service.". To set your password for the first time your password Enter your password and #.
Page 135 1.8.2 Logging in to and Configuring Your Mailbox Changing or Deleting Your Personal Greeting Messages After callers reach your mailbox, they will hear your personal greeting message. You can record 6 kinds of Personal Greetings; the appropriate greeting will be played for callers. If you delete or do not record a greeting message, a prerecorded greeting message will be used.
Page 136 1.8.2 Logging in to and Configuring Your Mailbox To record or delete your Personal Greeting Messages PT/SLT/PS/SIP Extn./S-PS No Answer Greeting Busy Signal Greeting After Hours Greeting Log in to your mailbox. Caller ID Greeting Temporary Greeting Enter 41. Absent Message absent message no.
Page 137 1.8.2 Logging in to and Configuring Your Mailbox • * We recommend stating your name in your greeting messages, so that callers will know they have reached the correct mailbox. • A Temporary Personal Greeting is played instead of all your other greetings until it is deleted. Each time you log in to your mailbox, the Unified Messaging system will ask you if you want to turn off (delete) your Temporary Personal Greeting.
Page 138 1.8.2 Logging in to and Configuring Your Mailbox To assign Caller ID numbers for the first time PT/SLT/PS/SIP Extn./S-PS Log in to your mailbox. personalised greeting no. Enter the personalised Enter 414. Enter 2 greeting number (1–4). to accept. To continue STEP B Add another caller ID number.
Page 139 1.8.2 Logging in to and Configuring Your Mailbox To change your password PT/SLT/PS/SIP Extn./S-PS your desired password Log in to your mailbox. Enter 421. Enter the desired password and #. Enter 2 to accept. On-hook. CAUTION • It is strongly recommended that a password of 16 numbers be used for maximum protection against unauthorised access.
Page 140 1.8.2 Logging in to and Configuring Your Mailbox system features quickly. While guidance is being provided, you can also use service commands to, for example, switch to a different Unified Messaging system service mode. For KX-UT series SIP phone and S-PS users: When using the MESSAGE button, please press the MESSAGE button before going off-hook.
Page 141: Message Playback And Related Features
1.8.3 Message Playback and Related Features 1.8.3 Message Playback and Related Features – Playing Messages – Printing Fax Messages – Bookmarks (Voice Messages only) – Recovering Deleted Messages – Replying to Messages – Transferring Messages – Remote Access Playing Messages Callers and other subscribers can leave voice messages for you, and you can play them back later after you have logged in to your mailbox.
Page 142 1.8.3 Message Playback and Related Features Message Type Feature Deleted Repeat this message ü ü ü Replay the previous message ü ü ü Play the next message ü ü ü Delete this message • ü ü If a confirmation message is played, press 1 to delete the message.
Page 143 1.8.3 Message Playback and Related Features • For voice messages, Unified Messaging system programming determines if the message envelope is played before each message, after each message, or only when you press 6. For more information, consult your System Administrator. •...
Page 144 1.8.3 Message Playback and Related Features To set Automatic Delivery PT/SLT/PS/SIP Extn./S-PS Go to "To change Automatic Delivery status" Log in to your mailbox. or "To set default fax number". Enter 47. To change Automatic Delivery status Current status The new status is announced.
Page 145: Recovering Deleted Messages
1.8.3 Message Playback and Related Features To set the Bookmark PT/SLT/PS/SIP Extn./S-PS During message playback Enter 85. To start playback at the Bookmark PT/SLT/PS/SIP Extn./S-PS During or after message playback Enter 86. Recovering Deleted Messages You can delete voice/fax messages in your mailbox. Once a message has been deleted, it is retained until the end of the day, then it will be permanently deleted.
Page 146 1.8.3 Message Playback and Related Features • Auto Receipt: You will receive notification (receipt message) once the recipient has played back the message. Finally, you can send your reply immediately or set a message delivery time. However, please note that you cannot reply to receipt messages.
Page 147 1.8.3 Message Playback and Related Features To leave a message for the sender PT/SLT/PS/SIP Extn./S-PS During or after voice message/fax message envelope playback C.Tone Enter 4. Enter 2 Record your message. Enter 1 to begin recording. to end recording. You can pause and resume recording by pressing 2.
Page 148 1.8.3 Message Playback and Related Features • Specify several recipients by entering a Personal Group Distribution List number (refer to " Personal Group Distribution Lists") or a Mailbox Group number. • Record your own comments and send them along with the transferred message. •...
Page 149: Remote Access
1.8.3 Message Playback and Related Features Remote Access You can call the Unified Messaging system while outside and log in to your mailbox in order to listen to your messages. There are 2 ways to log in to your mailbox remotely: •...
Page 150 1.8.3 Message Playback and Related Features Remote manual log-in From Outside Telephone Call the Unified your mailbox no. your password Messaging system from an outside telephone. Enter #6. Enter and your Enter your password and #. mailbox number. This step can be omitted if your mailbox requires no password.
Page 151: Sending Messages
1.8.4 Sending Messages 1.8.4 Sending Messages – Message Delivery – Personal Group Distribution Lists – External Message Delivery – External Message Delivery Lists – Receiving External Delivery Messages You can record messages and send them to other subscribers, to extension users who do not have mailboxes, and even to outside parties.
Page 152: To Send A Message
1.8.4 Sending Messages To send a message PT/SLT/PS/SIP Extn./S-PS Go to "To specify recipients by number" Log in to your mailbox. or "To specify recipients by name (dialling by name)". Enter 2. To specify recipients by number mailbox no. personal group Go to "To record your message".
Page 153: Personal Group Distribution Lists
1.8.4 Sending Messages PT/SLT/PS/SIP Extn./S-PS Continued from previous page To record your message C.Tone Enter 1 to record Record your message. Enter 1 your message. to end recording. You can pause and resume recording by pressing 2. Press 2 to add another recipient, If you pause for more than then go to "To specify recipients by 20 seconds, recording will...
Page 154 1.8.4 Sending Messages To create and edit personal group distribution lists PT/SLT/PS/SIP Extn./S-PS desired personal group Log in to your mailbox. distribution list no. Enter 44. Enter the desired personal group distribution list number (1–4). C.Tone State the group name. Enter 1 to record Enter 2 to add Enter 2...
Page 155 1.8.4 Sending Messages To change personal group distribution list names PT/SLT/PS/SIP Extn./S-PS desired personal group Log in to your mailbox. distribution list no. Enter 44. Enter the desired personal group Enter 1 to change distribution list number (1–4). the list name. Change (record) the list name Delete the list name,...
Page 156 1.8.4 Sending Messages To send an external delivery message PT/SLT/PS/SIP Extn./S-PS Go to "To specify a single recipient" Log in to your mailbox. or "To specify multiple recipients (external message delivery list)". Enter 931. To specify a single recipient Outside party’s outside line access no.
Page 157 1.8.4 Sending Messages PT/SLT/PS/SIP Extn./S-PS Continued from previous page To specify multiple recipients (external message delivery list) desired list no. 4-digit password Enter 2. Enter the desired list number (1 or 2). Enter a 4-digit password required for listening to the message. Press # if you do not want to set a password.
Page 158 1.8.4 Sending Messages • *1 Example: To enter 5:00, press 5#. To enter 5:15, press 515#. • *2 This option may not be available if the system is programmed to use 24-hour time. • *3 Example: If today is February 16 and you enter 17#, the message will be delivered tomorrow.
Page 159 1.8.4 Sending Messages To create/add to an external message delivery list PT/SLT/PS/SIP Extn./S-PS List number 1 Log in to your mailbox. List number 2 Enter 932. Enter 1 or 2. Enter 1. outside outside line access no. telephone no. Enter the outside line access number Dial the outside telephone number Enter 2 to accept.
Page 160: Receiving External Delivery Messages
1.8.4 Sending Messages Receiving External Delivery Messages When you send an external delivery message, the Unified Messaging system will call each of the specified recipients. When a recipient answers the call, the system will guide him or her through the following procedure. After a recipient has listened to an external delivery message, he or she can send you a reply to your message, and even set urgent or private message status.
Page 161: Transferring Calls
1.8.5 Transferring Calls 1.8.5 Transferring Calls – Call Transfer – Incomplete Call Handling – Assigning Your Covering Extension – Remote Call Forwarding – Assigning and Cancelling Telephone Numbers for Call Transfer to Outside Line – Voice Mail Transfer Call Transfer When a call reaches your extension via the Automated Attendant service, normally your extension will ring and you can answer the call.
Page 162 1.8.5 Transferring Calls To set call transfer status PT/SLT/PS/SIP Extn./S-PS Call Blocking Call Screening Intercom Paging Log in to your mailbox. Transfer to Mailbox Transfer to Custom Service Disable Call Transfer Enter 51. Enter the desired Call Transfer status. Follow the prompts as necessary. On-hook.
Page 163 1.8.5 Transferring Calls Return to Top Menu: The caller is returned to the top menu of the Automated Attendant service and can then choose to call a different extension. To set Incomplete Call Handling status PT/SLT/PS/SIP Extn./S-PS Leaving a Message No answer calls Transfer to Covering Extension Log in to your mailbox.
Page 164: Remote Call Forwarding
1.8.5 Transferring Calls To assign your Covering Extension PT/SLT/PS/SIP Extn./S-PS desired extension no. Log in to your mailbox. Enter the desired extension number. Enter 52. If you have already assigned your Covering Extension and want to assign a different extension, press 1 before entering the desired extension number. On-hook.
Page 165 1.8.5 Transferring Calls To assign outside telephone numbers for Remote Call Forwarding PT/SLT/PS/SIP Extn./S-PS Change telephone number 1 Log in to your mailbox. Change telephone number 2 Enter 48. Enter 1 or 2. If you have already set a telephone number and wish to change it, press 1 after selecting telephone number 1 or 2.
Page 166: Outside Line
1.8.5 Transferring Calls • * This option is announced only if you are authorised to use it through system programming for PBX COS (Class of Service) settings and UM COS settings. For more information, consult your System Administrator. Assigning and Cancelling Telephone Numbers for Call Transfer to Outside Line When you assign a telephone number for Call Transfer to Outside Line, your calls will be transferred to the assigned telephone number when:...
Page 167 1.8.5 Transferring Calls You can also create a Voice Mail Transfer button on your phone to transfer received outside calls to a mailbox of another extension so that calling parties can leave messages. Using the Voice Mail Transfer button, you can also perform operations with one touch (for PT and PS only).
Page 168 1.8.5 Transferring Calls To transfer your own call to the called extension’s mailbox PT/PS extension no. R.B.Tone (Voice Mail Transfer) B.Tone (DSS) DND Tone Off-hook. Dial extension number Press Voice Mail or press DSS. Transfer. • *Indication tone after going off-hook •...
Page 169: Other Features
1.8.6 Other Features 1.8.6 Other Features – Interview Mailbox – Message Waiting Notification – Personal Caller Name Announcement – Live Call Screening (LCS) – Recording Your Conversation – Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver – Personal Custom Service –...
Page 170: Message Reception Mode
1.8.6 Other Features To change answer lengths PT/SLT/PS/SIP Extn./S-PS Change the answer length. Skip to the next question, then repeat this step. Log in to your mailbox. Skip to the previous question, then repeat this step. Select a specific question. Enter the question number and #, then repeat this step.
Page 171: Message Waiting Notification
1.8.6 Other Features • Not all subscribers have interview mailboxes. For more information, consult your System Administrator. Message Waiting Notification The Message Waiting Notification feature lets you know you have received new messages in your mailbox by: Message Waiting Lamp: The message lamp on your telephone (if it has one) will light when you receive a new message.
Page 172 1.8.6 Other Features To turn Device Notification On/Off PT/SLT/PS/SIP Extn./S-PS desired device no. Log in to your mailbox. Enter 62. Enter the desired device number (1–6). Send notification Use a preprogrammed schedule for all messages Receive notification always (continuously) Turn off notifications Send notification On-hook.
Page 173: Personal Caller Name Announcement
1.8.6 Other Features • * If you are using an ISDN or SIP line in en bloc dialling mode, to insert a pause or special command in the middle of the telephone number, pause momentarily while entering the telephone number. You will hear a list of available options, for example, "To add more digits, press 4.
Page 174 1.8.6 Other Features To change Caller ID numbers and recorded names PT/SLT/PS/SIP Extn./S-PS Log in to your mailbox. Enter 452. Change the Caller ID number, then go to STEP A in "To assign Caller ID numbers and recording names". Change the caller’s name, then go to STEP B in "To assign Caller ID numbers and recording names".
Page 175 1.8.6 Other Features Before operating • Create a Live Call Screening (LCS) button (Personal Programming). • Select the mode, either Hands-free or Private (Personal Programming). • Set the extension PIN (Personal Identification Number). • Set the Live Call Screening feature. To set Live Call Screening PT/PS PIN: Personal Identification Number...
Page 176 1.8.6 Other Features Operation Flowchart The operations in the shaded areas can be done hands-free. PT/PS Hands-free Mode Private Mode (Alarm Tone) Monitoring (Hands-free) Monitoring (Handset) Monitoring MONITOR (Live Call No operation Screening) Off-hook. Press SP-PHONE, MONITOR or Live Call Screening.
Page 177 1.8.6 Other Features Recording Your Conversation You can record a conversation into a mailbox while talking on the phone. You can select the mailbox each time you record a conversation. To record into your mailbox (Two-way Record) PT/PS During a conversation To stop recording, press this button again.
Page 178: Toll Saver
1.8.6 Other Features • The Two-way Record button light, Two-way Transfer button light or One-touch Two-way Transfer button light shows the current status as follows: Off: Not recording. On: Recording the conversation. Note When you record your Two-way telephone conversations, you should inform the other party that the conversation is being recorded.
Page 179 1.8.6 Other Features Personal Custom Service A Personal Custom Service is a set of options you can present to your callers, allowing them to press buttons on their telephones in order to access certain features. You should explain the options available to your callers in each of your personal greeting messages, for example, "This is (name).
Page 180 1.8.6 Other Features Exit To create your personal custom service PT/SLT/PS/SIP Extn./S-PS desired dialling key Log in to your mailbox. Enter 1. Enter the desired dialling key (0, 3–9) Enter 461. that you want to assign an option to. Skip this step if you are creating your Personal Custom Service for the first time.
Page 181 1.8.6 Other Features To select the No DTMF Input operation PT/SLT/PS/SIP Extn./S-PS Log in to your mailbox. Enter 1 to select Enter 1. the No DTMF Input Operation. Enter 461. Message recording. Disconnect the caller. Disconnect the caller when call was received after hours (message recording for all other times).
Page 182 1.8.6 Other Features To set/cancel PT/SLT/SIP Extn. Change the setting Accept the current setting, Log in to your mailbox. then go on-hook to finish. Cancel (turn off) the Timed Reminder, Enter 95. then go on-hook to finish. Enter the desired option. Once desired time Daily...
Page 183 This feature must be enabled for your mailbox by the System Administrator. Sending a Fax from your PC You can send a document from your PC as a fax by selecting KX-NS1000 FAX Driver as the printer. To download KX-NS1000 FAX Driver Log in to Web Maintenance Console.
Page 184 The software changes the selected account in the Outlook user interface from the Unified Messaging IMAP account to the default Outlook inbox after a specified time period. Doing so enables multiple users efficiently interact with the KX-NS1000 through Microsoft Outlook. To download IMAP Session Controller You can download the IMAP Session Controller software from Web Maintenance Console: Log in to Web Maintenance Console.
Page 185 1.8.6 Other Features Item Description Settings Language Select the language to use for the settings dialogue box and the notification area menu. No Operation Timer Enter the time period after which the selected account is changed from the Unified Messaging account to the default Outlook inbox if there has been no user activity. Timer value: 30 to 600 seconds (Recommended timer value: 30 to 60 seconds) E-Mail Account for UM...
Page 186: Quick Reference
1.8.7 Quick Reference 1.8.7 Quick Reference The flow below includes all top menu options and frequently used features. Only options 1–4 and 0 are announced in the top menu when accessed. If you press 0 (help menu), you can listen to the whole top menu (options 1–9).
Page 187 1.8.7 Quick Reference Continued from previous page Mailbox Management: Record Personal Greeting: 1 Record Personal Greetings 1 No Answer 2 Set Password 2 Busy Signal 3 Enter Owner's Name 3 After Hours 4 Set Group Distribution List 4 Caller ID 5 Record Caller Name/Number 5 Temporary 6 Set Personal Custom Service...
Page 188 1.8.7 Quick Reference Continued from previous page Set Other Features: 1 Listen to Deleted Message 2 Set Interview Mailbox 3 Set External Delivery Message 4 Set Remote Call Forwarding 5 Set Timed Reminder Listen to Deleted Messages: Receive Deleted Message (During or after playback): 1 Voice Message Repeat Message 2 Fax Message Envelope...
Page 189: Setting The Telephone According To Your Needs
1.9.1 Setting the Alarm (Timed Reminder) 1.9 Setting the Telephone According to Your Needs 1.9.1 Setting the Alarm (Timed Reminder) You can receive an alarm at your telephone to remind you of a meeting, appointment or as a wake-up call. The alarm can occur either once or daily (every day until cancelled) at a preset time.
Page 190 1.9.1 Setting the Alarm (Timed Reminder) To confirm Press TRANSFER several times. • You can also confirm the Timed Reminder by using the soft button. • The alarm keeps ringing for preprogrammed seconds. • If you receive an incoming call during ringback, the ringing starts after the ringback stops. •...
Page 191: Refusing Incoming Calls (Do Not Disturb [Dnd])
1.9.2 Refusing Incoming Calls (Do Not Disturb [DND]) 1.9.2 Refusing Incoming Calls (Do Not Disturb [DND]) – Do Not Disturb (DND) – Switching FWD/DND Status Using Fixed FWD/DND Button Do Not Disturb (DND) You can set this feature to prevent incoming calls from ringing at your extension. This can be useful, for example, when you are in a meeting or busy.
Page 192 1.9.2 Refusing Incoming Calls (Do Not Disturb [DND]) • The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting Mode. Ask your manager what mode your system is in if you are not sure. For KX-UT series SIP phones, only FWD/DND Setting Mode is supported. (1) When in FWD/DND Cycle Switch Mode: Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as shown below:...
Page 193 1.9.2 Refusing Incoming Calls (Do Not Disturb [DND]) • For KX-UT670 SIP phone users: There is no physical FWD/DND button on the phone. To set and clear the FWD/DND status, refer to the documentation for your phone. To switch the FWD/DND status for outside calls While on-hook (when in FWD/DND Setting Mode) The current FWD/DND status for outside calls is displayed.
Page 194 1.9.2 Refusing Incoming Calls (Do Not Disturb [DND]) • * This step can be omitted. To set and clear FWD/DND for all calls KX-UT113/KX-UT123/KX-UT133/KX-UT136/KX-UT248 While on-hook FWD/DND Off : FWD/DND off Do Not Disturb : DND on Press UP or DOWN with Press ENTER to set.
Page 195: Receiving Call Waiting (Call Waiting/Off-Hook Call Announcement [Ohca]/Whisper Ohca)
1.9.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA) 1.9.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA) During a conversation, you can be informed of a call waiting with a tone or voice announcement through your built-in speaker or handset. (Default: Disable—No call [Intercom calls]/No tone [Outside calls]) Call Waiting Tone: a waiting tone through the built-in speaker of PT/handset of SLT.
Page 196: Displaying Your Telephone Number On The Called Party And Caller's Telephone (Calling/Connected Line Identification Presentation [Clip/Colp])
1.9.4 Displaying Your Telephone Number on the Called Party and Caller’s Telephone (Calling/Connected Line Identification Presentation [CLIP/COLP]) 1.9.4 Displaying Your Telephone Number on the Called Party and Caller’s Telephone (Calling/Connected Line Identification Presentation [CLIP/COLP]) CLIP: When making an outside call, you can present your preprogrammed telephone number to the called party. COLP: When receiving an outside call, you can present your preprogrammed telephone number to the calling party.
Page 197: Preventing Your Telephone Number Being Displayed On The Caller's Telephone (Connected Line Identification Restriction [Colr])
1.9.5 Preventing Your Telephone Number Being Displayed on the Caller’s Telephone (Connected Line Identification Restriction [COLR]) 1.9.5 Preventing Your Telephone Number Being Displayed on the Caller’s Telephone (Connected Line Identification Restriction [COLR]) When receiving an outside call, you can select whether the caller can see your telephone number or not. To show/prevent PT/SLT/PS/SIP Extn./S-PS Show...
Page 198: Preventing Your Number Being Displayed On The Called Party's Telephone (Calling Line Identification Restriction [Clir])
1.9.6 Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling Line Identification Restriction [CLIR]) 1.9.6 Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling Line Identification Restriction [CLIR]) When making an outside call, you can select whether the called party can see your telephone number or not. To show/prevent PT/SLT/PS/SIP Extn./S-PS Show...
Page 199: Preventing Other People From Joining Your Conversation (Executive Busy Override Deny)
1.9.7 Preventing Other People from Joining Your Conversation (Executive Busy Override Deny) 1.9.7 Preventing Other People from Joining Your Conversation (Executive Busy Override Deny) PT/SLT/PS/SIP Extn./S-PS Prevent C.Tone Allow Off-hook. Enter 733. Enter 1 to prevent On-hook. or 0 to allow. •...
Page 200: Turning On The Background Music (Bgm)
1.9.8 Turning on the Background Music (BGM) 1.9.8 Turning on the Background Music (BGM) You can listen to the background music through your telephone speaker while on-hook. An external music source, such as a radio, can be connected. If your extension becomes busy (off-hook, making or receiving a call etc.), the music stops temporarily.
Page 201: Protecting Your Line Against Notification Tones (Data Line Security)
1.9.9 Protecting Your Line against Notification Tones (Data Line Security) 1.9.9 Protecting Your Line against Notification Tones (Data Line Security) You can protect the line against audible notification tones, such as a call waiting tone during a conversation. Set this feature if your extension has a data communication device, such as a PC or fax machine connected to ensure secure data transmission.
Page 202: Checking The Time Service Status
1.9.10 Checking the Time Service Status 1.9.10 Checking the Time Service Status You can check the current status of the Time Service on the display. While on-hook (Time Service (Day/Night/ Lunch/Break)) Press TRANSFER or Time Service (Day/Night/Lunch/Break). • The Time Service (Day/Night/Lunch/Break) button light shows the current status as follows: Off: Day mode Green on: Lunch mode Flashing green: Break mode...
Page 203: Setting The Parallelled Telephone To Ring (Parallelled Telephone)
1.9.11 Setting the Parallelled Telephone to Ring (Parallelled Telephone) 1.9.11 Setting the Parallelled Telephone to Ring (Parallelled Telephone) In the case where a single line telephone is connected in parallel to your digital proprietary telephone, you can choose whether the parallelled single line telephone will ring to an incoming call or not.
Page 204: Using Your Ps Or S-Ps In Parallel With A Wired Telephone (Wireless Xdp Parallel Mode)
1.9.12 Using Your PS or S-PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode) 1.9.12 Using Your PS or S-PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode) Your PS or S-PS can be used in parallel with a PT, SLT, or SIP phone. When in this mode, incoming calls to a wired telephone also ring the paired PS or S-PS.
Page 205: Using Your Phone In Parallel With A Wired Telephone (One-Numbered Extension)
1.9.13 Using Your phone in Parallel with a Wired Telephone (One-numbered extension) Two telephones connected to the KX-NS1000 can be set to share 1 extension number, and both telephones can be set to ring (One-numbered Extension feature). You can choose whether the sub extension associated with the main extension will ring when an incoming call is received.
Page 206: Clearing Features Set At Your Extension (Extension Feature Clear)
1.9.14 Clearing Features Set at Your Extension (Extension Feature Clear) 1.9.14 Clearing Features Set at Your Extension (Extension Feature Clear) You can reset the settings of the following features on your extension to the default settings with one operation. This feature is also known as Station Programme Clear. •...
Page 207 1.9.14 Clearing Features Set at Your Extension (Extension Feature Clear) PT/SLT/PS/SIP Extn. C.Tone On-hook. Off-hook. Enter 790. • For Users in Canada Only: After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable (Tone)". In this case, dial tone 2 will be heard when you go off-hook. User Manual...
Page 208: Utilising The Call Centre
1.10.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up) 1.10 Utilising the Call Centre 1.10.1 Leaving an Incoming Call Distribution Group (Log-in/ Log-out, Wrap-up) You can control your status in an incoming call distribution group. When in the Log-out mode, incoming calls to the group will not ring at your extension.
Page 209 1.10.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up) PT/PS ICD Group: Incoming Call Distribution Group While on-hook ICD Group Specified extension no. (Log-in/Log-out) Enter ICD Group extension number Press Log-in/Log-out. KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS While on-hook (Log-in/Log-out for all groups) (Log-in/Log-out of a specified group) Press Log-in/Log-out for all groups or Log-in/Log-out of a specified group.
Page 210 1.10.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up) To set/cancel Not Ready mode or to leave Wrap-up mode (To enter Ready mode) PT/PS/KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS While on-hook (Wrap-up) Press red or flashing red Wrap-up. • * The status will be as follows: Ready Not Ready Not Ready...
Page 211: Monitoring And Controlling The Call Status Of An Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
1.10.2 Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor) 1.10.2 Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor) – Monitoring the Status of Waiting Calls –...
Page 212 1.10.2 Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor) To monitor Display PT ICD Group: Incoming Call Distribution Group ICD Group extension no. C.Tone Off-hook. Enter 739. Enter ICD Group On-hook. extension number.
Page 213 1.10.2 Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor) To change the Log-in/Log-out mode Display PT (DSS) Press desired DSS. • The DSS button light shows the current status as follows: Off: The extension is not in the group.
Page 214: Forwarding A Waiting Call (Manual Queue Redirection)
1.10.3 Forwarding a Waiting Call (Manual Queue Redirection) 1.10.3 Forwarding a Waiting Call (Manual Queue Redirection) When your incoming call distribution group is busy and other outside calls arrive, the arriving calls are put in a waiting queue. Extensions can check the status of the queue with the Hurry-up button light, and forward the longest waiting call in the queue to a preset destination manually.
Page 215: Using User-Supplied Equipment
1.11.1 If a Doorphone/Door Opener is Connected 1.11 Using User-supplied Equipment 1.11.1 If a Doorphone/Door Opener is Connected You can talk to a person at the door through the doorphone. Preprogrammed extensions or an outside party can receive the calls from the doorphone. You can open the door. –...
Page 216 1.11.1 If a Doorphone/Door Opener is Connected To call the doorphone PT/SLT/PS/SIP Extn./S-PS doorphone no. C.Tone Enter Enter doorphone Talk. Off-hook. number (2 digits). • If no one answers a doorphone call within a specified time period, the call is cancelled. Opening a Door (Door Open) Some extensions may be prohibited from using this feature.
Page 217: If An External Relay Is Connected
1.11.2 If an External Relay is Connected 1.11.2 If an External Relay is Connected Preprogrammed extensions can switch on a relay (e.g., alarm) connected to the PBX. To switch on the relay PT/SLT/PS relay no. C.Tone Enter relay number Off-hook. Enter On-hook.
Page 218: If An External Sensor Is Connected
1.11.3 If an External Sensor is Connected 1.11.3 If an External Sensor is Connected Preprogrammed extensions can receive an alert call from an external sensor (e.g., security alarm) connected to the PBX. To answer a sensor call PT/SLT/PS/SIP Extn./S-PS D.Tone Off-hook.
Page 219: If A Host Pbx Is Connected
1.11.4 If a Host PBX is Connected 1.11.4 If a Host PBX is Connected – Accessing External Services (External Feature Access [EFA]) Accessing External Services (External Feature Access [EFA]) You can access special features (e.g., Call Waiting) offered by a host PBX or telephone company. This feature is only effective for an outside call.
Page 220: If A Voice Processing System Is Connected
You or an outside party can access the Voice Processing System from a telephone. – Call Forwarding to Voice Mail (Voice Mail Integration) If your PBX has a Panasonic Voice Processing System connected (e.g., KX-TVM series) using digital integration, the following features are also available: –...
Page 221 1.11.5 If a Voice Processing System is Connected To forward your calls to your mailbox PT/SLT/PS Both Calls Cancel All Calls Outside Calls Busy No Answer Intercom Calls Busy/No Answer Off-hook. Enter Enter 0 to 2 as you desire. Enter required number. For "Cancel", For "Cancel", go on-hook go on-hook directly.
Page 222 1.11.5 If a Voice Processing System is Connected To transfer your own call to the called extension’s mailbox PT/PS extension no. R.B.Tone (Voice Mail Transfer) B.Tone (DSS) DND Tone Off-hook. Dial extension number Press Voice Mail or press DSS. Transfer. To listen to messages PT/SLT/PS MESSAGE...
Page 223 1.11.5 If a Voice Processing System is Connected Before operating • Create a Live Call Screening (LCS) button (Personal Programming). • Select the mode, either Hands-free or Private (Personal Programming). • Set the extension PIN (Personal Identification Number). • Set the Live Call Screening feature. To set Live Call Screening PT/PS PIN: Personal Identification Number...
Page 224 1.11.5 If a Voice Processing System is Connected Operation Flowchart The operations in the shaded areas can be done hands-free. PT/PS Hands-free Mode Private Mode (Alarm Tone) Monitoring (Hands-free) Monitoring (Handset) Monitoring SP-PHONE MONITOR (Live Call No operation Screening) Press SP-PHONE, MONITOR or Live Call Off-hook.
Page 225: Recording A Conversation
1.11.5 If a Voice Processing System is Connected Recording a Conversation You can record a conversation into a mailbox while talking on the phone. You can select the mailbox each time you record a conversation. To record into your mailbox (Two-way Record) PT/PS During a conversation To stop recording,...
Page 226 1.11.5 If a Voice Processing System is Connected • Note: When you record your Two-way telephone conversations, you should inform the other party that the conversation is being recorded. Customising Your Phone • 3.1.3 Customising the Buttons Create or edit a Two-way Record button, a Two-way Transfer button and a One-touch Two-way Transfer button.
Page 227: Administrative Features
1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) 1.12 Administrative Features 1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) In a hotel-type environment, an extension assigned as a hotel operator can be used to view and set the check-in/check-out/cleaned-up (Ready or Not Ready) status of each guest room extension.
Page 228 1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) • After check-in, Remote Extension Dial Lock is deactivated, and the guest can make outside calls from the room extension. (Refer to "2.1.1 Extension Control".) • After check-in, all billing data previously charged to the extension will be cleared automatically.
Page 229 1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) To record/edit room charges and check out a room with/without printing an invoice Display PT While on-hook ENTER extension no. minibar charge (Check-out) (DSS) Press Check-out. Dial extension number and then press Enter minibar charge.
Page 230: Dial Number
1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) • After check-out, Remote Extension Dial Lock is activated, and outside calls from the room extension are restricted. (Refer to "2.1.1 Extension Control".) • After check-out, wake-up call and Call Log information for the room extension are cleared automatically.
Page 231 1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) Setting a Timed Reminder to a Room Extension (Remote Wake-up Call) The hotel operator can remotely set or cancel a Timed Reminder to a room extension. This allows guests to request wake-up calls without having to program the extension themselves.
Page 232 1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) To confirm Display PT extension no. (DSS) Enter 2. Dial extension number Off-hook. Enter or press desired DSS. The display shows Timed Reminder information. C.Tone On-hook. • Timed Reminder can also be set from the room extension. (For information about setting Timed Reminder, refer to "1.9.1 Setting the Alarm (Timed Reminder)".) The most recent setting will be valid no matter which extension made the setting.
Page 233 1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) Customising Your Phone • 3.1.3 Customising the Buttons Create or edit a Cleaned-up button. User Manual...
Page 234: Recording Information Using Preprogrammed Messages (Printing Message)
1.12.2 Recording Information Using Preprogrammed Messages (Printing Message) 1.12.2 Recording Information Using Preprogrammed Messages (Printing Message) You can record a variety of information from your extension using up to 8 preprogrammed messages. Message information from all extensions is recorded with the PBX. For example, it is possible to use this feature as a time card by selecting preprogrammed "sign in"...
Page 235: Exchanging The Settings Between Extensions
1.13.1 Walking Extension 1.13 Exchanging the Settings between Extensions 1.13.1 Walking Extension You can exchange the settings set at another extension with your own settings. This allows you to use your own settings, including your extension number, on another person’s extension. Settings such as extension number and One-touch Dialling memory are available at the new extension.
Page 236: Enhanced Walking Extension
1.13.2 Enhanced Walking Extension 1.13.2 Enhanced Walking Extension In addition to exchanging the settings between extensions (Walking Extension), you can change the status of your extension to "Service-in" or "Service-out" (Enhanced Walking Extension). Service-in: An extension is in use (normal status). Service-out: Extension Dial Lock (®...
Page 237 1.13.2 Enhanced Walking Extension <Example (b)> When two users share one telephone User A Extn. No. 101 Extn. No. 101 Extn. No. 101 Service-out Service-in Service-out Service-out Extension Service-in Service-out Service-in Status User B Extn. No. 102 Extn. No. 102 Extn.
Page 238: Using A Telephone With A Display
1.14.1 Using the Call Log 1.14 Using a Telephone with a Display 1.14.1 Using the Call Log This is available for display proprietary telephones, portable stations, KX-UT series SIP phones, and S-PSs. – Calling with the Incoming Call Log – Calling with the Outgoing Call Log •...
Page 239 1.14.1 Using the Call Log To confirm the log information with the Navigator Key KX-NT300/KX-NT500/KX-DT300/KX-T7600 While on-hook Press Up or Down until Press Left twice. desired party appears. To clear the log information Display PT While confirming the log information (Call Log) Press TRANSFER.
Page 240 1.14.1 Using the Call Log • The Call Log button light shows the current status as follows: Off: No incoming call. Or you have already viewed the call log. Red on: You have missed calls to view. • If your call is answered by another extension, the caller’s information is recorded on the displays of both your extension and the answering extension.
Page 241 1.14.1 Using the Call Log • * System programming is required for this operation. • This operation is available only for digital proprietary telephones with a display. To store the caller’s information in personal speed dialling Display PT When the desired party is displayed Press STORE.
Page 242: Using The Directories
1.14.2 Using the Directories 1.14.2 Using the Directories You can call using the directories (Personal Speed Dialling Directory, System Speed Dialling Directory and Extension Number Directory). Only personal directories can be stored, edited or deleted on your extension. If a call arrives while you are using a directory, the display will be replaced with the caller’s information. –...
Page 243: Storing Names And Numbers
1.14.2 Using the Directories Storing Names and Numbers To store a Personal Speed Dialling Directory item Display PT While on-hook PROG. name phone no. PAUSE Press PROGRAM Enter phone number Enter name Press ENTER Press ENTER or PAUSE. or STORE. or STORE.
Page 244: Entering Characters
1.14.2 Using the Directories Entering Characters You can enter the following characters. The tables show you the characters available for each button. Table 1 or Table 2 can be programmed. Table 1 (Standard mode) User Manual...
Page 245 1.14.2 Using the Directories Table 1 (Standard mode for RU model) User Manual...
Page 246 1.14.2 Using the Directories Table 2 (Option mode) User Manual...
Page 247 1.14.2 Using the Directories Table 2 (Option mode for CE model) User Manual...
Page 248 1.14.2 Using the Directories Table 2 (Option mode for GR model) User Manual...
Page 249 1.14.2 Using the Directories Table 2 (Option mode for RU model) User Manual...
Page 250: Accessing System Features (System Feature Access)
1.14.3 Accessing System Features (System Feature Access) 1.14.3 Accessing System Features (System Feature Access) You can access a feature with the "Feature Access" menu. To access "Feature Access" menu and select the feature KX-NT300/KX-NT500/KX-DT300/KX-T7600 While on-hook Press Right Press ENTER. Press Up or Down four times.
Page 251 1.14.3 Accessing System Features (System Feature Access) Features Refer to Directed Call Pickup 1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup) Directed Group Call Pickup 1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup) Data Line Security 1.9.9 Protecting Your Line against Notification Tones (Data Line Security) User Manual...
Page 252: Self Labelling (Kx-Nt366/Kx-Nt553/Kx-Nt556/Kx-Nt560/Kx-Ut248/Kx-Ut670 Only)
1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560/KX-UT248/KX-UT670 only) 1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560/ KX-UT248/KX-UT670 only) The KX-NT366/KX-NT553/KX-NT556/KX-NT560 IP-PT and KX-UT248/KX-UT670 SIP phone have flexible buttons with an LCD screen next to the buttons. For KX-NT366: The KX-NT366 IP-PT has 12 flexible buttons, and the telephone’s display shows which feature, telephone number, or extension number is assigned to each button.
Page 253 1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560/KX-UT248/KX-UT670 only) (pages) of 8 flexible button assignments. A different feature, telephone number, or extension number can be assigned to each button in each set. This means that 32 flexible buttons are available. Page 4 Page 3 Headset Company-A Wrap-up...
Page 254 1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560/KX-UT248/KX-UT670 only) • For KX-NT366/KX-NT553/KX-NT556/KX-NT560 users: – When you answer an incoming call or when you seize an outside line, the display automatically changes to the page that contains the green lit button. – After customising each button, you can set the displayed text for the button. For details about customising buttons, refer to "3.1.3 Customising the Buttons".
Page 255: Cellular Phone Features
1.15.1 Cellular Phone Features 1.15 Cellular Phone Features 1.15.1 Cellular Phone Features When you are not at your desk or not in the office and receive a forwarded outside call on your cellular phone, you can use the following features if enabled through system programming. –...
Page 256: Transferring To An Outside Phone Number
1.15.1 Cellular Phone Features To transfer Cellular Phone During a conversation extension no. private phone no. D.Tone Dial extension number or Enter #. enter 7 and the dial private phone number. Talk. On-hook. The party is placed on hold. This step can be omitted. •...
Page 257 1.15.1 Cellular Phone Features Adding Other Parties during a Conversation (Conference) To establish a conference call Cellular Phone During a conversation extension no. D.Tone C.Tone Enter #. Dial extension number. Talk to the Enter #. Enter 3. new party. Talk with multiple parties. Talking to Two Parties Alternately (Call Splitting) Cellular Phone During a conversation...
Page 258 1.15.1 Cellular Phone Features Paging and then Transferring a Call Cellular Phone During a conversation paging group C.Tone D.Tone Enter #. Dial paging group Announce. Enter number (2 digits). The party is placed on hold. Wait for an answer. On-hook. Talk.
Page 259: Manager Operation
Section 2 Manager Operation This section shows the manager how to control the other extensions or the PBX. User Manual...
Page 260: Control Features
2.1.1 Extension Control 2.1 Control Features 2.1.1 Extension Control The manager extension can control the settings of other extensions. – Changing the Settings of Other Extensions Changing the Settings of Other Extensions To lock/unlock other extensions (Remote Extension Dial Lock) This feature is also known as Remote Station Lock Control.
Page 261: Time Service Mode Control
2.1.2 Time Service Mode Control 2.1.2 Time Service Mode Control The manager extension or the preprogrammed extension can change the time mode (Day, Lunch, Break or Night). There are two methods (Automatic or Manual) of changing the time modes. Automatic: enables the time mode for each day of the week to change automatically. You may also change it manually.
Page 262 2.1.2 Time Service Mode Control Customising Your Phone • 3.1.3 Customising the Buttons Create or edit a Time Service (Day/Night/Lunch/Break) button or a Time Service Switching Mode (Automatic/Manual) button. User Manual...
Page 263: Restriction Level Control (Dial Tone Transfer)
2.1.3 Restriction Level Control (Dial Tone Transfer) 2.1.3 Restriction Level Control (Dial Tone Transfer) The manager extension can change the restriction level, permitting an extension to make a call. PT/PS During a conversation with an extension (Toll Restriction/ C.Tone Call Barring) Press Toll Restriction/ On-hook.
Page 264: Turning On The External Background Music (Bgm)
2.1.4 Turning on the External Background Music (BGM) 2.1.4 Turning on the External Background Music (BGM) The manager extension can select and broadcast background music in the office through external speakers. To select and start/stop the background music PT/SLT/PS/SIP Extn./S-PS BGM no.
Page 265: Recording Outgoing Messages (Ogm)
One is recorded using the handset, and the other is recorded from an external BGM (MOH) port. If your PBX is connected to other KX-NS1000 PBX(s) in a network, please specify the site ID for recording.
Page 266 2.1.5 Recording Outgoing Messages (OGM) To record from an external BGM (MOH) port To specify a site ID (if necessary) site ID Enter 9 and Enter 3. Off-hook. Enter Enter 1 as site ID (2 digits: 01–16). port number OGM floating You hear The message extension no.
Page 267: Allowing Users To Seize An Unavailable Outside Line (Trunk Busy Out)
2.1.6 Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out) 2.1.6 Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out) When a problem is found on a certain outside line, the PBX automatically makes it unavailable for use temporarily.
Page 268: Releasing Network Direct Station Selection (Ndss) Monitor
2.1.7 Releasing Network Direct Station Selection (NDSS) Monitor 2.1.7 Releasing Network Direct Station Selection (NDSS) Monitor NDSS buttons can be customised on any extension connected to your PBX. An NDSS button allows an extension user to monitor another extension connected to another PBX in a private network.
Page 269: Configuring Unified Messaging Features
2.2.1 System Manager Features 2.2 Configuring Unified Messaging Features 2.2.1 System Manager Features The System Manager can configure mailboxes, change class of service (COS) settings for subscribers, etc. – Logging in to the System Manager’s Mailbox – Setting Up Mailboxes –...
Page 270 2.2.1 System Manager Features • For KX-UT series SIP phone and S-PS users: When using the MESSAGE button, please press the MESSAGE button before going off-hook. Manual log-in PT/SLT/PS/SIP Extn./S-PS System Manager’s mailbox no. (Voice Mail Transfer) Off-hook. Enter #6. Enter and System Manager’s mailbox number (default: 999).
Page 271: Setting Up Mailboxes
2.2.1 System Manager Features Setting Up Mailboxes The System Manager’s primary function is to create mailboxes for new subscribers and to maintain system organisation by deleting unneeded passwords and mailboxes. • If the Unified Messaging system is being programmed via Web Maintenance Console, the System Manager cannot create or edit mailboxes.
Page 272 2.2.1 System Manager Features Parameters Steps Subscriber’s Name to change the current setting. Record the subscriber’s name. to accept. Extension Number to change the current setting. Enter the subscriber’s extension number. to accept. First 4 Letters of the to change the current setting. Subscriber’s Last Name Enter the first 4 letters of subscriber’s last name.
Page 273 2.2.1 System Manager Features Parameters Steps Auto Forwarding to change the current setting (enable or disable). • If set to "Disable": The Auto Forwarding parameter is the last parameter to be entered. To continue assigning or editing other mailboxes, go back to STEP To finish, enter to accept.
Page 274 2.2.1 System Manager Features Maintenance Console or by the System Manager using a telephone. COS No. 513 and No. 514 are assigned by default to the Message Manager and the System Manager respectively. • If the Unified Messaging system is being programmed via Web Maintenance Console, the System Manager cannot set COS parameters.
Page 275 2.2.1 System Manager Features Parameters Steps Message Retrieval Order to change the current setting (LIFO [Last In First Out] or FIFO [First In First Out]). to accept the current setting, then go to the next parameter. to accept. Prompt Mode for Primary.
Page 276 2.2.1 System Manager Features Parameters Steps Mailbox Capacity Warning to change the current setting. to accept the current setting, then go to the next parameter. Enter the warning threshold (1–60 min or 0: None). to accept. Personal Greeting for Caller to change the current setting (enable or disable).
Page 277 2.2.1 System Manager Features Remote Time Service Mode Setting You can set the time service mode from an outside telephone even when you are away from the office. To set the time service mode Log in to the System Manager’s mailbox. Enter the tenant number and to change.
Page 278 2.2.1 System Manager Features To change the service group setting Log in to the System Manager’s mailbox. to change the Service Group setting. Enter the Service Group Number (1–64). Select the desired Time Service period entry. for Day Time service. for Night Time service.
Page 279: Broadcasting Messages
2.2.1 System Manager Features Broadcasting Messages The System Manager can deliver a message to multiple subscribers with one operation. Messages can be sent to all subscribers (Broadcasting Message feature) or to specified subscribers only. When delivering a message to specified subscribers, the System Manager can receive verification when the recipients listen to the message.
Page 280 2.2.1 System Manager Features Log in to the System Manager’s mailbox. Enter the mailbox number of the intended recipient. • Enter by name by pressing first. Use a Mailbox Group by specifying its number. to accept. to record a message. •...
Page 281 2.2.1 System Manager Features To change the System Manager’s password Log in to the System Manager’s mailbox. to change the mailbox password. to accept the current setting. Enter the desired password, then to accept. User Manual...
Page 282: Message Manager Features
2.2.2 Message Manager Features 2.2.2 Message Manager Features The Message Manager can maintain the general delivery mailbox, change notification settings, record/delete prompts, etc. – Logging in to the Message Manager’s Mailbox – Managing the General Delivery Mailbox – Setting Up Message Waiting Notification –...
Page 283 2.2.2 Message Manager Features • For KX-UT series SIP phone and S-PS users: When using the MESSAGE button, please press the MESSAGE button before going off-hook. Manual log-in PT/SLT/PS/SIP Extn./S-PS Message Manager’s mailbox no. (Voice Mail Transfer) Off-hook. Enter #6. Enter and Message Manager’s UM group’s floating...
Page 284 2.2.2 Message Manager Features Remote automatic log-in From Outside Telephone Call the Unified Messaging system from the preprogrammed Enter Message Manager’s Message Manager password outside telephone number Mailbox (assigned as a Caller ID number). Enter Message Manager password and #. CAUTION •...
Page 285 2.2.2 Message Manager Features Log in to the Message Manager’s mailbox. to receive the message. Enter the desired number. to listen to new messages. to listen to old messages. to listen to deleted messages. Enter the desired number. to listen to voice messages. to listen to fax message envelopes.
Page 286 2.2.2 Message Manager Features Start with step 1–5 in "To listen to messages" above. while listening to the message to transfer. Enter the destination mailbox number. to accept. to record a comment. • Enter to transfer messages without comment. Enter to add a mailbox number.
Page 287 2.2.2 Message Manager Features Log in to the Message Manager’s mailbox. to assign a telephone number. Enter the desired number. to change the first telephone number. to change the second telephone number. to change the third telephone number. to accept. Dial the telephone number.
Page 288 2.2.2 Message Manager Features – Telephone numbers 1 and 2 used for call forwarding destinations when Remote Call Forwarding is set to an outside line – Automatic Delivery Status and Default Fax Number, used to immediately print faxes to a specified fax machine as soon as they are received in your mailbox.
Page 289: Recording Messages
2.2.2 Message Manager Features To customise the message manager’s mailbox Log in to the Message Manager’s mailbox. to change the password. to accept. Enter the password, then to accept. Enter the desired number. to change or assign the operator’s extension. to accept.
Page 290 2.2.2 Message Manager Features A maximum of 32 company greetings for business/non-business and lunch/break hours as well as holidays can be selected, recorded, or deleted as necessary. • Company Name • Custom Service Menus: A maximum of 200 custom service menus can be recorded. These menus guide callers to the services they require without the need for a human operator.
Page 291 2.2.2 Message Manager Features To record menus and voice labels Log in to the Message Manager’s mailbox. to record messages. Enter the desired number to record. for Company Greetings. for Company Name. for Custom Service Menus. for Voice Labels for Mailbox Groups. for System Prompts.
Page 292 2.2.2 Message Manager Features To record system prompts Log in to the Message Manager’s mailbox. to record messages. Enter the system prompt number you want to change. To change specific prompts, go to step 5. To change all prompts one after another without reviewing the current recording, go to step 6. To change specific prompts: Enter the prompt number you want to change (refer to "...
Page 293: Remote Call Forwarding Set
2.2.2 Message Manager Features Log in to the Message Manager’s mailbox. to modify system caller names. Enter the Caller ID List Number (1–200). • Guidance is "Caller Name Announcement number". • Enter to go to step 3. to change the name. •...
Page 294 2.2.2 Message Manager Features To assign Remote Call Forwarding set Log in to the Message Manager’s mailbox. Select the desired forwarding setting. for FWD All. for FWD Busy. for FWD No Answer. for FWD Busy or No Answer. for FWD to Outside, then go to step 6. for FWD Cancel, then go to step 9.
Page 295 2.2.2 Message Manager Features To set/cancel Log in to the Message Manager’s mailbox. Enter the desired number. to change the setting. to accept, then go on-hook to finish. to cancel (turn off), then go on-hook to finish. Enter the desired time, then Enter the desired number.* for AM.
Page 296 2.2.2 Message Manager Features Recording an Emergency Greeting An emergency greeting can be recorded as "Company Greeting 1" directly from the top menu. The emergency greeting can be used in times such as when the company must be closed due to bad weather. To record Log in to the Message Manager’s mailbox.
Page 297 2.2.2 Message Manager Features Prompt No. Modifiable Prompts Enter the first 3 or 4 letters of the person’s last name For ’Q’, press 7 For ’Z’, press 9 Sorry, there are no more matching names Sorry, this name cannot be found Incorrect entry To call the operator, press 0 Calling the operator...
Page 298 2.2.2 Message Manager Features Prompt No. Modifiable Prompts 1006 To leave a message, press 1 To enter another extension, press Sorry, this line is busy If you would like to hold, press 1 To cancel holding, press 2 now. Otherwise, I’ll try your party again. User Manual...
Page 299: Customising Your Phone & System
Section 3 Customising Your Phone & System This section shows you how to customise your individual telephone or PBX according to your needs. Find the desired setting and program as necessary. User Manual...
Page 300: Customising Your Phone (Personal Programming)
3.1.1 Customising Your Phone (Personal Programming) 3.1 Customising Your Phone (Personal Programming) 3.1.1 Customising Your Phone (Personal Programming) You can customise your telephone features. For example, you can change the initial settings or button features according to your needs. – Assigning an Extension PIN to Your Extension (Extension PIN [Personal Identification Number]) •...
Page 301 3.1.1 Customising Your Phone (Personal Programming) To cancel PT/SLT/PS/SIP Extn./S-PS PIN: Personal Identification Number stored extension PIN C.Tone Enter 0. Enter stored Off-hook. Enter 799. extension PIN. On-hook. CAUTION There is a risk that fraudulent telephone calls will be made if a third party discovers your password (extension PIN).
Page 302: Settings On The Programming Mode
3.1.2 Settings on the Programming Mode 3.1.2 Settings on the Programming Mode You can programme features using the programming mode for a PT or PS. – Setting Features – Clearing Features • To exit at any time, lift the handset. •...
Page 303 3.1.2 Settings on the Programming Mode Programming Item Selection & Parameter Input English 2nd Language Display Language Selection 3rd Language Which display language do you prefer? 4th Language 5th Language No—Manual (The display keeps showing all of the outside caller’s information unless you Display Switching Mode change it to the call duration Would you like the call...
Page 304 3.1.2 Settings on the Programming Mode Programming Item Selection & Parameter Input Calling/Connected Line Caller ID assigned to your Identification Presentation extension (CLIP/COLP) Which number should be Caller ID assigned on the displayed on the called and outside line being used calling party’s telephone? No line An idle outside line...
Page 305 3.1.2 Settings on the Programming Mode Programming Item Selection & Parameter Input No—The telephone will not Parallelled Telephone *1*3 ring. Should the single line Yes—The telephone will telephone in parallel ring? ring. Forced Answerback No—Disable Selection Do you prefer to answer a call without going off-hook Yes—Enable regardless of the AUTO ANS...
Page 306 3.1.2 Settings on the Programming Mode Programming Item Selection & Parameter Input No—Off Absent Message message no. (1– Yes—Shows the selected Would you like to show a message. message on the caller’s telephone display? Yes—Shows your personal message. Personal Absent Message Creating your personal message (max.
Page 307 3.1.2 Settings on the Programming Mode Programming Item Selection & Parameter Input No—Allow Paging Deny Would you like to prohibit paging announcements? Yes—Deny No—Off Key Pad Tone Set Do you prefer to hear the key pad tone? Yes—On Background Music (BGM) No—Off Do you want background music through your telephone...
Page 308 3.1.2 Settings on the Programming Mode Programming Item Selection & Parameter Input No—Normal (Any Flexible buttons can be modified.) One-touch Dialling Assignment Mode Yes—Only One-touch Selection dialling buttons can be modified. Do you prefer to set the However, to modify them, there One-touch dialling only? is no need to enter "2"...
Page 309 3.1.2 Settings on the Programming Mode To store the names and numbers in personal speed dialling PROG. personal speed dialling no. PAUSE Enter personal speed Enter 10 and then press ENTER. Press PROGRAM dialling number (2 digits). Or press STORE. or PAUSE.
Page 310: Clearing Features
3.1.2 Settings on the Programming Mode To edit the names and numbers of personal speed dialling PROG. personal speed dialling no. PAUSE Press PROGRAM Enter 10 and then press ENTER. Enter personal speed or PAUSE. Or press STORE. dialling number (2 digits). To erase a number or character CLEAR Press Left or Right...
Page 311 3.1.2 Settings on the Programming Mode Features Default Setting LCS Mode Set (After Answering) Stop recording Automatic Call Waiting Manual Call Waiting—Intercom Calls Off (No call/No tone) Call Waiting Tone Type Selection Tone 1 Absent Message Personal Absent Message Cleared Call Forwarding (FWD)/Do Not Disturb (DND)—Intercom/Outside Calls FWD N/A Timer...
Page 312: Customising The Buttons
3.1.3 Customising the Buttons 3.1.3 Customising the Buttons You can customise the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons. •...
Page 313 3.1.3 Customising the Buttons Button Programming Input FWD/DND—Outside calls FWD/DND—Intercom calls Group FWD—Both calls + Incoming call distribution group extension no. Group FWD—Outside calls + Incoming call distribution group extension no. Group FWD—Intercom + Incoming call distribution group extension no. calls Account Conference...
Page 314 3.1.3 Customising the Buttons Button Programming Input Calling Line Identification Restriction (CLIR) Connected Line Identification Restriction (COLR) ISDN-Hold Headset *4*7 Time Service Switching (+ Tenant no.) Mode (Automatic/Manual) Network Direct Station + Another PBX extension no. Selection (NDSS) Primary Directory Number (PDN) Secondary Directory + Extension no.
Page 315 3.1.3 Customising the Buttons • *1 " ", "#", FLASH/RECALL, PAUSE, Secret (INTERCOM) and TRANSFER can also be stored. If you do not want to display the stored number when making a call, press the Secret (INTERCOM) button before and after the numbers you wish to conceal. If you store an outside party’s number, you should first store a line access number.
Page 316 3.1.3 Customising the Buttons To specify the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button (Digital proprietary telephone only) To continue (CO) (CO) (ICD Group) (ICD Group) PROG. PROG. tone type no. (PDN) (PDN) R.Tone (SDN) (SDN) Press Enter tone type...
Page 317: System Programming Using Web Maintenance Console
Maintenance Console. (You can view menus and setting items, but you can edit only a limited number of items.) In addition, you can download the KX-NS1000 FAX Driver and the UM IMAP Session Controller for Microsoft Outlook. For details, refer to "...
Page 318: Editing Settings In Web Maintenance Console
3.2.1 User Programming • If you attempt to log in, but enter an incorrect password three times, you may not attempt to log in again for a 5 minute period. CAUTION • For security, change the password the first time that you programme the PBX. •...
Page 319: Changing Your Mailbox Password
3.2.1 User Programming In the Contact tab, edit Extension PIN (max. 10 digits), Fax, Phone (Home), Phone (Mobile), and Email 1–3. Note Entry for the extension PIN is hidden and displayed as dots "·". Click OK. Changing Your Mailbox Password You can change your mailbox password in the Unified Message tab of the Edit User screen.
Page 320 3.2.1 User Programming To record a prompt Select a Prompt No., and click Play/Record. When "Record from extension" is selected: Specify the extension number of the telephone used for recording, then click Connect. When the specified extension rings, go off-hook. Click Record, Stop, or Play to record or play a system prompt.
Page 321 3.2.1 User Programming Mailbox Parameters Item Description Mailbox Password Specifies the password needed to access the mailbox. If a default password is programmed by an administrator, that password will be assigned automatically when creating all mailboxes. To change a password for a mailbox: Click Edit.
Page 322 3.2.1 User Programming Item Description Call Transfer Status Determines how the Unified Messaging system handles a call when it reaches your extension. Click Edit. Select the setting from the following items. • None: Rings your extension. • Call blocking: Handles the call according to the Incomplete Call Handling for No Answer setting for your extension.
Page 323 3.2.1 User Programming Item Description Incomplete Call Handling Specifies how the Unified Messaging system handles a call when the for Busy extension is busy. Click Edit. Select the setting from the following items. More than one option can be selected. •...
Page 324 3.2.1 User Programming Item Description Selection Determines how the Unified Messaging system will handle a call in the selected scenario. Select the setting from the following items. • None: Rings your extension. • Call blocking: Handles the call according to the Incomplete Call Handling for No Answer setting for your extension.
Page 325 3.2.1 User Programming Item Description Transfer to specified telephone number 2, 3, 4, 5 (Selection/Other) If "None" or "Call screening" is selected for Selection, and the call could not be transferred to the number specified in Transfer to specified telephone number - 1, the call will be transferred according to these settings for this scenario, in numerical order of priority.
Page 326 3.2.1 User Programming Notification Parameters Item Description Message Waiting Lamp If set to "Enable", the Message Waiting Lamp of your telephone turns on when a new message is recorded. Telephone Specifies the Message Waiting Notification schedule for each device. Device—Device No. 1, 2, 3 The following parameters can be specified for devices 1, 2, and 3.
Page 327 3.2.1 User Programming Item Description Use Mode Specifies if and how each device is used for message notification. You can also specify the use mode from your telephone: • Not use: The selected device is not used for message notification. •...
Page 328 3.2.1 User Programming Item Description Title Order Specifies the format of the title of the notification. Title String Specifies the text string to be included as part of the title of the notification. Callback Number Specifies the callback number to be included in the notification (max. 32 digits).
Page 329 3.2.1 User Programming Auto Forwarding Item Description Auto Forwarding Active If set to "Yes", the Unified Messaging system automatically forwards messages that have not been played for a specified length of time to another mailbox. Auto Forwarding Mailbox Specifies the mailbox to which the messages will be forwarded. Number Note A Mailbox Group number cannot be specified as a destination.
Page 330 3.2.1 User Programming Personal Custom Service Item Description Personal Custom Service Specifies the Personal Custom Service. Note • Make sure to add an outside line access number when you store an outside telephone number. • If you are using a PRI line, you may need to enter # at the end of outside telephone numbers.
Page 331 3.2.1 User Programming Item Description No DTMF Input Operation Specifies the operation taken when no DTMF input (a caller does not dial anything) is received after the Personal Greeting: • Recording: The caller will be guided to leave a message. •...
Page 332 3.2.1 User Programming Automatic Login item Description Auto Login Extension When this item is set to "Enable", you are able to access your mailbox directly without entering the mailbox number. You can automatically log in from your extensions, by calling from an outside telephone whose number is stored as a Caller ID number, or by dialling a telephone number assigned to a specified DID number or trunk.
Page 333 3.2.1 User Programming Direct Service Item Description Direct Service UM Specifies which features can be directly accessed by dialling a Unified Extension Messaging extension number: • Record No Answer Greeting: You can record the greeting played when there is no answer. •...
Page 334 3.2.1 User Programming Item Description No Space for Receiving Specifies the action taken when there is not enough free space in the mailbox Coverage Mode to save a fax message in the mailbox: • Transfer to Fax Extension: Transfers the fax to a specified fax extension.
Page 335 3.2.1 User Programming Message Client Item Description Message Client Display Specifies the language of information generated by the UM system for the Language mail (IMAP) client. Changing E-mail Notification Settings You can set the e-mail notification settings for missed calls in the Email Notification tab of the Edit User screen.
Page 336 3.2.1 User Programming The available speed dialling numbers are shown in sets of 20. Select the desired set from Index. Enter the name of the Personal Speed Dialling number to call in Speed Dialling - Personal Name (max. 20 characters). Enter the number to be dialled by the Personal Speed Dialling number in Speed Dialling - Personal Number (max.
Page 337 3.2.1 User Programming Button Steps Select One-touch from Type. Then enter the desired number in Dial (max. 32 digits consisting of 0–9, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]). Note • If you store an outside party’s number, you should first store a line access number.
Page 338 3.2.1 User Programming Button Steps Conference Select Conference from Type. Terminate Select Terminate from Type. External Feature Access Select EFA from Type. (EFA) Call Charge Reference Select Charge from Type. Select Call Park from Type. Then select Specific from Parameter Selection. Call Park Specify the number of the parking zone a call is to be parked in Optional Parameter (Ringing Tone Type Number).
Page 339 3.2.1 User Programming Button Steps Select ISDN Service from Type. Then enter the desired number in Dial (max. 32 digits consisting of 0–9, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]). ISDN Service Note Availability of this button depends on the ISDN service of your telephone company.
Page 340 3.2.1 User Programming Button Steps Select Two-way Transfer from Type. Then enter the UM group’s floating extension number in Extension Number. (The UM group’s default floating extension number is 500. Specify the number of the extension whose mailbox will be used to record Two-way Transfer conversations using One-touch Two-way Transfer in Ext No.
Page 341 3.2.1 User Programming • Incoming ICD group calls only (i.e., when recording outside calls, limit recording to incoming ICD group calls only) • This screen is accessible only by users designated as Automatic Two-way Recording supervisors. • Forwarded calls and calls retrieved from being on hold will also be automatically recorded. However, conference calls will not be recorded.
Page 342 3.2.1 User Programming • Extension: Specify an extension to view all calls that were recorded using Automatic Two-way Recording for that extension, or select ALL. • Status: Specify the status for the recorded messages in the mailbox. • Internal/External: Specify whether the recorded conversations were intercom calls or external calls, or specify both.
Page 343: Customising Extensions And The System-For Managers
Section 4 Customising Extensions and the System–for Managers This section shows managers how to customise the PBX’s extension and system settings according to their needs. Find the desired setting and program as necessary. User Manual...
Page 344: Manager Programming
Available Extension The extension assigned as a manager Required Telephone A Panasonic Proprietary Telephone with display (2 lines or more) (e.g., KX-NT343, KX-NT546, KX-DT346, KX-T7636) Manager Password To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234) CAUTION •...
Page 345: Manager Programming
4.1.2 Manager Programming 4.1.2 Manager Programming Changing Call Charges and Extension Control To enter the programming mode To programme To exit PROG. PROG. To continue manager password programming input PAUSE PAUSE Follow Press Press PROGRAM Enter Enter manager Press PROGRAM or PAUSE.
Page 346 4.1.2 Manager Programming Item Programming Input + Verification code + PIN (max. 10 digits) Setting the verification code PIN. CAUTION There is a risk that fraudulent telephone calls will be made if a third party discovers your password (verification code PIN). The cost of such calls will be billed to the owner/renter of the PBX.
Page 347: Supervisory Monitor (Acd) Control
4.1.3 Supervisory Monitor (ACD) Control 4.1.3 Supervisory Monitor (ACD) Control – Monitor Control & Execute – ACD Report Analysis Monitor Control & Execute A user designated as an ACD Supervisor or Administrator can specify certain ICD groups to monitor and configure the monitoring settings.
Page 348 4.1.3 Supervisory Monitor (ACD) Control Click Load. To save an ACD report Click Report Profiles. Name the Profile Name (max. 32 characters). Click Save. To select ACD report options Click Option. In ACD Report - Export CSV File Format, select either Comma(,) or Semicolon(;) as the data separator.
Page 349 4.1.3 Supervisory Monitor (ACD) Control Click the agent name you want to analyse from the displayed agent names on Available Agent for ACD Report window. Click ==> to move the agent you selected in step b. to the Selected Agent for ACD Report window. (Maximum 128 agents) To delete an agent from the Selected Agent for ACD Report window, click the agent name, and then click <==.
Page 350 4.1.3 Supervisory Monitor (ACD) Control User Manual...
Page 351: Appendix
Section 5 Appendix This section provides the List of Operations by Telephone Type, the Troubleshooting, the Feature Number Table and Tone List. Check the Troubleshooting section before consulting your dealer. User Manual...
Page 352: List Of Operations By Telephone Type
5.1.1 List of Operations by Telephone Type 5.1 List of Operations by Telephone Type 5.1.1 List of Operations by Telephone Type The features that each type of telephone supports are marked with a ü. Features without a ü for a certain telephone type are not supported for that telephone type.
Page 353 5.1.1 List of Operations by Telephone Type Telephone Type SIP phone Features Non- S-PS KX-UT KX-UT series series Sending a Call Waiting Notification (Call ü ü ü Waiting) Leaving a Message Waiting Indication/ ü ü ü ü ü ü Calling Back the Caller Who Left an Indication (Message Waiting) Joining an Existing Call (Executive Busy ü...
Page 354 5.1.1 List of Operations by Telephone Type Telephone Type SIP phone Features Non- S-PS KX-UT KX-UT series series Transferring to an Outside Party Using the ü ü ü ü ü ü PBX Service Transferring a Call Using the ISDN Service ü...
Page 355 5.1.1 List of Operations by Telephone Type Telephone Type SIP phone Features Non- S-PS KX-UT KX-UT series series Forwarding Your Calls Using ISDN Service ü ü ü (Call Forwarding [CF]—by ISDN) 1.6.2 Showing a Message on the Caller’s Telephone ü ü...
Page 356 5.1.1 List of Operations by Telephone Type Telephone Type SIP phone Features Non- S-PS KX-UT KX-UT series series 1.9.4 Displaying Your Telephone Number on the Called Party and Caller’s Telephone (Calling/ ü ü ü ü ü ü Connected Line Identification Presentation [CLIP/ COLP]) 1.9.5 Preventing Your Telephone Number Being Displayed on the Caller’s Telephone (Connected...
Page 357 5.1.1 List of Operations by Telephone Type Telephone Type SIP phone Features Non- S-PS KX-UT KX-UT series series Opening a Door (Door Open) ü ü ü ü ü ü 1.11.2 If an External Relay is Connected To switch on the relay ü...
Page 358 5.1.1 List of Operations by Telephone Type Telephone Type SIP phone Features Non- S-PS KX-UT KX-UT series series 2.1.3 Restriction Level Control (Dial Tone Transfer) ü ü 2.1.4 Turning on the External Background Music ü ü ü ü ü ü (BGM) 2.1.5 Recording Outgoing Messages (OGM) ü...
Page 359: Troubleshooting
5.2.1 Troubleshooting 5.2 Troubleshooting 5.2.1 Troubleshooting Troubleshooting Problem Remedy The telephone does not work properly. • Confirm with your manager that your settings are correct. • If the problem persists, consult your dealer. The telephone does not respond when buttons •...
Page 360 5.2.1 Troubleshooting Problem Remedy A reorder tone is audible or "Restricted" is • The telephone is locked. displayed. Unlock your telephone. 1.6.3 Preventing Other People from Using Your Telephone (Extension Dial Lock), 2.1.1 Extension Control) • Toll restriction is activated. Consult your manager or dealer.
Page 361 5.2.1 Troubleshooting Problem Remedy I do not want to show my telephone number to the • 1.9.5 Preventing Your Telephone calling or called party’s telephone. Number Being Displayed on the Caller’s Telephone (Connected Line Identification Restriction [COLR]), 1.9.6 Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling Line Identification Restriction [CLIR]))
Page 362 5.2.1 Troubleshooting Problem Remedy The MESSAGE button light has lit up. • Another extension left you a message waiting indication or someone left a message in your mailbox while you were on the phone or away from your desk. An SDN button on my extension does not work. •...
Page 363: Feature Number Table
5.3.1 Feature Number Table 5.3 Feature Number Table 5.3.1 Feature Number Table Numbers listed below are the default settings. There are flexible feature numbers and fixed feature numbers. If you change the flexible feature numbers, fill in your assigned numbers (new) in the list for future reference. Default Feature (While dial tone is heard) Additional digits/buttons...
Page 364 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) 1.2.4 When the Dialled Line is Busy or There is No Answer To cancel callback ringing (Automatic Callback Busy Cancel)/To cancel (CCBS Cancel) Leaving a Message Waiting Indication/Calling Back the Caller Who Left an Indication (Message Waiting) For an extension leaving a message...
Page 365 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) – group no. (2 digits) Group – extension no. Directed Denying Other People the Possibility of Picking Up Your Calls (Call Pickup Deny) – To deny –...
Page 366 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) Answering Call Waiting from the Telephone Company 1.4.5 Multiple Party Conversation phone no. + TRANSFER button + 3 Adding a Third Party during a Conversation Using the ISDN Service (Three-party Conference [3PTY]—by ISDN) 1.6.1 Forwarding Calls...
Page 367 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) 1.6.2 Showing a Message on the Caller’s Telephone Display (Absent Message) – 1–9 (+ parameter) + # To set – To cancel 1.6.3 Preventing Other People from Using Your Telephone (Extension Dial Lock) –...
Page 368 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) – Both Calls 0 (Cancel)/ 2 (All calls)/ – 3 (Busy)/ Outside Calls 4 (No Answer)/ – 5 (Busy/No Answer) Intercom Calls + UM group’s floating extension no. 1.9.1 Setting the Alarm (Timed Reminder) –...
Page 369 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) – To prevent – To allow 1.9.8 Turning on the Background Music (BGM) – BGM no. (1 digit) To set – To cancel 1.9.9 Protecting Your Line against Notification Tones (Data Line Security) –...
Page 370 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) 1.10.2 Monitoring and Controlling the ICD Group extension no. Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor) 1.11.1 If a Doorphone/Door Opener is Connected doorphone no.
Page 371 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) 1.13.2 Enhanced Walking Extension – To set an extension status to Service-out – + your extension no. + extension PIN To set an extension status to Service-in 2.1.1 Extension Control To lock/unlock other extensions...
Page 372 5.3.1 Feature Number Table Default Feature (While dial tone is heard) Additional digits/buttons (New) 3.1.1 Customising Your Phone (Personal Programming) Assigning an Extension PIN to Your Extension (Extension PIN [Personal Identification Number]) – 1 + extension PIN + # + same extension To set PIN + # –...
Page 373 5.3.1 Feature Number Table Feature Default (While busy, DND or call tone is heard/after dialling) 1.2.4 When the Dialled Line is Busy or There is No Answer Sending a Call Waiting Notification (Call Waiting) To an Extension Refusing the Call (DND Override) Joining an Existing Call (Executive Busy Override) Leaving a Message Waiting Indication/Calling Back the Caller Who Left an Indication (Message Waiting)
Page 374: What Is This Tone
5.4.1 What is This Tone? 5.4 What is This Tone? 5.4.1 What is This Tone? While on-hook Ring Tones The following tones are programmable allowing recognition of call type (Outside, Intercom or Doorphone). Tone 1 Tone 2 Tone 3 Tone 4 When going off-hook Dial Tones Tone 1...
Page 375 5.4.1 What is This Tone? Tone 2 • When any of the following features are set: • Absent Message • Background Music • Call Forwarding • Call Pickup Deny • Call Waiting • Do Not Disturb • Extension Dial Lock •...
Page 376 5.4.1 What is This Tone? Reorder Tone The outside line you tried to seize is not assigned or denied. Ringback Tones Tone 1 Tone 2 (Not available for KX-UT series SIP phones and S-PSs) Do Not Disturb (DND) Tone (Not available for KX-UT series SIP phones and S-PSs) The dialled extension is refusing incoming calls.
Page 377 5.4.1 What is This Tone? Tone 1 • The feature setting was set successfully. • A call is received in Voice-calling mode. Tone 2 • Before receiving a page through an external speaker • You receive a call in Hands-free mode.
Page 378: Revision History
• 1.1.5 Before Operating the Telephones What Kind of Telephone Can Be Used? Using a Navigator Key/Jog Dial/Volume Key When You Use a Panasonic Proprietary Telephone or KX-UT Series SIP Phone Connection Example • 1.8.6 Other Features Sending a Fax from your PC IMAP •...
Page 379: Pcmpr Software File Version 002.1Xxxx
5.5.2 PCMPR Software File Version 002.1xxxx 5.5.2 PCMPR Software File Version 002.1xxxx Changed Contents • 1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560/KX-UT248/KX-UT670 only) • 1.8.2 Logging in to and Configuring Your Mailbox Logging in to Your Mailbox • 2.1.5 Recording Outgoing Messages (OGM) •...
Page 380: Pcmpr Software File Version 003.0Xxxx
5.5.3 PCMPR Software File Version 003.0xxxx 5.5.3 PCMPR Software File Version 003.0xxxx New Contents • 1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup) Caller Information Display before Call Pickup using DSS button • 1.9.13 Using Your phone in Parallel with a Wired Telephone (One-numbered extension) •...
Page 381 • Pan-European Integrated Services Digital Network (ISDN) using ISDN primary rate access Panasonic System Networks Co., Ltd. declares that the KX-NS1000UK and the KX-NS1000NE are in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.ptc.panasonic.eu...
Page 382 Web Site: http://www.panasonic.net/ Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd. , and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.

Panasonic KX-NS1000 User Manual

1 Operation

2 Manager Operation

3 Customising Your Phone & System

4 Customising Extensions and the System-For Managers

5 Appendix

Quick Links

User Manual

Related Manuals for Panasonic KX-NS1000

Summary of Contents for Panasonic KX-NS1000

Table of Contents