Page 1
(1) - (24) Instructions en français <1> - <24> Thank you for purchasing a Panasonic product. Charge the batteries for about 6 hours before initial use. Please read this guide before using the unit and save it for future reference.
Introduction About this guide This guide explains how to use the basic features of KX-TGP500/KX-TGP550. For further information on operations and customising your phone, please read the User Guide on the Panasonic Web site at: http://panasonic.net/pcc/support/sipphone/ Contact your administrator for further information.
Important Information L Do not allow the AC adaptor or Ethernet cable to be excessively pulled, bent or For your safety placed under heavy objects. To prevent severe injury and loss of Operating safeguards life/property, read this section carefully before L Unplug the product from power outlets using the product to ensure proper and safe before cleaning.
3. USE ONLY rechargeable Ni- Base unit location/avoiding noise MH batteries AAA (R03) size. The base unit and other compatible Panasonic L Do not mix old and new batteries. units use radio waves to communicate with L Do not open or mutilate the batteries.
Refer to the User Guide on the Panasonic Contact to Authorised Representative: Web site. See page 3 for Panasonic URL. Panasonic Testing Centre L You are responsible for the security...
Important Information mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
Controls L Charge contacts Handset ■ Control type A Soft keys The handset features 2 soft keys and a joystick. By pressing a soft key, or by pressing the centre of the joystick, you can select the feature shown directly above it on the display.
Controls Base unit KX-TGP500 A 4 (Status) indicator L Indicates the status of the unit and network. B {x} (Handset locator button) L Allows you to page all handsets.
Page 10
Controls KX-TGP550 Q R S T A Corded handset L Headset jack B Receiver M Microphone C Speaker N Dial keypad D Handset paging buttons ({j} – O {s} (Speakerphone) {W} (Headset) {k}) Handset status indicators Speakerphone indicator P {T} (Mute) L Allow you to page each handset.
Controls Navigator key/volume key {<} {>} ■ Scrolling through lists or items By pressing this key ({^}, {V}, {3}, or {4}) repeatedly, you can scroll through (up, down, left, or right) various lists or items. ■ Adjusting the volume By pressing this key ({^} or {V}) repeatedly, you can adjust the receiver or speaker volume (up or down) while talking.
Page 12
10 seconds. Flashing L The base unit is registering a handset. Flashing L The base unit is paging handsets. (KX-TGP500 only) rapidly Amber L The base unit’s IP address may conflict with the IP addresses of other devices on your local network.
L For further details, please read the times. While the handset is User Guide on the Panasonic Web waiting to redial, the ringer site. See page 3 for Panasonic URL. indicator flashes. To cancel, press {i}. Using the speakerphone Dial the phone number and press {s}.
L For further details, please read the times. While the base unit is User Guide on the Panasonic Web waiting to redial, the site. See page 3 for Panasonic URL. speakerphone indicator on the base unit flashes. To cancel, Using the speakerphone press {b}.
Basic Operations L If you are using the corded handset, you can place it on the Answering calls using cradle. the base unit (KX- To release hold, lift the corded handset, or press {a} or {s}. TGP550 only) Lift the corded handset or press r or {s} when the unit rings.
Page 16
Basic Operations Using the base unit Available for: KX-TGP550 Transferring calls to another unit During an outside call, press {j} – {k} or {x}. Wait for the paged party to answer. L If the paged party does not answer, press the same button as in step 1 to return to the outside call.
Connecting the base unit Important: L Use only the supplied Panasonic AC adaptor PQLV219CE. L KX-TGP550 only: Do not connect the Ethernet cable connected to the PoE hub to the PC port of the unit. Doing so may cause severe damage to the unit.
Page 18
Setting Up KX-TGP550 Press plug firmly. Correct “Click” Hook Base unit “Click” Wrong C C C C C Base unit “Click” (220-240 V AC, 50/60 Hz) AC adaptor To a hub/router Ethernet cable To a computer Ethernet cable...
Battery charge Setting up the handset Charge for about 6 hours. L When the batteries are fully charged, Connecting the charger the charge indicator goes off. L Use only the supplied Panasonic AC Charge indicator adaptor PQLV219CE. Confirm “Charging” is displayed.
& for further information. Medium Automatic setup (default) Needs charging. Turning the DHCP connection mode Empty Y Handset Panasonic Ni-MH battery performance (supplied batteries) 1 (centre of joystick) i {#}{5}{0}{0} Operation Operating time {V}/{^}: “On” i M In continuous 5 hours max.
Page 21
Setting Up {V}/{^}: “Off” i M i {i} Setting the static IP address and other settings 1 (centre of joystick) i {#}{5}{0}{1} Set the IP address, subnet mask, default gateway, DNS1, and DNS2. L Push the joystick down {V} or up {^} to move between the items.
Page 22
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.