Panasonic WV-TW310L Installation Manual
Hide thumbs
Also See for WV-TW310L:
- Specifications (2 pages) ,
- Operating instructions manual (52 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Panasonic WV-TW310L
Summary of Contents for Panasonic WV-TW310L
- Page 1 Installation Guide Wearable Camera WV-TW310L/WV-TW310S Model No. WV-TW310LE/WV-TW310SE Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
- Page 2 For U.S. and Canada: provisions of Directive 2004/108/EC. WV-TW310L, WV-TW310S For Europe and other countries: Wir erklären in alleiniger Verantwortung, daß das Produkt, WV-TW310LE, WV-TW310SE auf das sich diese Erklärung bezieht, mit der folgenden...
-
Page 3: Table Of Contents
Contents Important safety instructions ......................4 Limitation of liability ........................4 Disclaimer of warranty ........................5 Preface ............................5 Main functions ..........................6 About the user manuals ........................ 7 System requirements for a PC ...................... 8 Trademarks and registered trademarks..................9 Abbreviations .......................... -
Page 4: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not install near any heat sources such as radiators, heat registers, stoves, or other appara- tus (including amplifiers) that produce heat. 7) Only use attachments/accessories specified by the manufacturer. 8) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. -
Page 5: Disclaimer Of Warranty
(6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE; (7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE. Preface WV-TW310 series Wearable Cameras are battery-powered cameras that are used to record images by being worn on a human body. They have Fisheye lens, which enables shooting with super wide angles. It is also possible to record H.264 images on the SDHC memory card of the camera. WV-TW310 • Image capture size (1280 x 960 (Aspect ratio of 4:3)). • There are 2 models, WV-TW310L and WV-TW310S, depending on the length of the connecting cable. • WV-TW310 series includes 2 PC software applications, Wearable Camera Agent Software and Wearable Camera Viewer Software, which are in the provided CD-ROM. WV-TB311 (Optional) • The WV-TB311 is the battery container specified for the WV-TW310 series. WV-TC312 (Optional) • The WV-TC312 is the conversion box specified for the WV-TW310 series. • The WV-TC312 is used to connect the camera and PC. • The WV-TC312 has a 12 V DC input terminal and 10BASE-T/100BASE-TX (PoE) input terminal. -
Page 6: Main Functions
<System configuration> • Network Camera View 4S • Wearable Camera Agent Software • Wearable Camera Viewer Software PC installed with software Network (LAN) Wearable Camera Wearable Camera IMPORTANT: • Wearable Camera Agent Software uses directed broadcasts to search for the camera. The router that you use must be configured to allow directed broadcast packets. If directed broad- cast packets cannot be configured to be allowed, structure your system so that camera and the PC installed with software are on the same network segment. • Use UDP port 10668 and 10669 for transmissions between the Wearable Camera Agent Software and the camera. The router that you use must be configured to allow UDP port 10668 and 10669. Note: • It is necessary to configure the network settings of the PC and its network environment to moni- tor images from the camera on the PC. It is also necessary to install a web browser on the PC. Main functions H.264 Recording Images are encoded to H.264 and saved on the SDHC memory card. Wide angle The wide angle lens enables wide areas to be recorded. -
Page 7: About The User Manuals
CD-ROM), you can verify the video image data. Image correction W ith Wearable Camera Viewer Software (included in the CD-ROM), you can view the images with stabilization and distortion correction. Playback W ith Wearable Camera Viewer Software (included in the CD-ROM), you can play video images. Snapshot W ith Wearable Camera Viewer Software (included in the CD-ROM), you can take snapshots. About the user manuals There are 2 sets of operating instructions for the WV-TW310L, WV-TW310S (P model), WV-TW310LE and WV-TW310SE (E model). • Installation Guide: Explains how to install and connect devices. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. ® ® Adobe Reader is required to read these operating instructions on the provided CD-ROM. -
Page 8: System Requirements For A Pc
System requirements for a PC ® CPU: Intel Core 2 Duo 2.66 GHz or faster recommended Memory: 2 GB or more Network Interface: 10BASE-T/100BASE-TX 1 port Audio interface: Sound card (when using the audio function) Monitor: Image capture size: 1024x768 pixels or more Color: 24-bit True color or better ® ® OS: Microsoft Windows ® ® Microsoft Windows Vista ® ® Microsoft Windows XP SP3 ® ® Web Browser: Windows Internet Explorer 9.0 (32-bit) ® ®... -
Page 9: Trademarks And Registered Trademarks
Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either regis- tered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. • Intel and Intel Core are trademarks or registered trademarks of Intel Corporation in the United States and other countries. • Adobe, Acrobat Reader, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • All other trademarks identified herein are the property of their respective owners. Abbreviations The Wearable Camera is refer to as "the camera" in this manual. -
Page 10: Precautions
Precautions Follow the instructions of battery. Do not directly touch the product with Use only the WV-TB311 battery container your skin when it has been turned on for (optional) for the battery. In combination with an extended period. this product, refer to the WV-TB311 and Direct skin contact with high-temperature parts WV-TC312 Operating Instructions for care and of the product for extended periods may cause... - Page 11 Cleaning this product body About the MOS image sensor Be sure to turn off the power before cleaning. • When continuously shooting a bright light Do not use strong abrasive detergent when source such as a spotlight, the color filter cleaning this camera. Otherwise, it may cause of the MOS image sensor may have deteri- discoloration.
-
Page 12: Precautions For Installation
Precautions for Installation Panasonic assumes no responsibility for injuries or property damage resulting from fail- ures arising out of improper installation or operation inconsistent with this documenta- tion. Installation place PoE (Power over Ethernet) Do not place the unit in the following places: Use a PoE hub/device that is compliant with • Locations where a chemical agent is used... -
Page 13: Major Operating Controls
Major operating controls <Camera> WV-TW310 Connecting cable Connector Lens cover Clip Mic hole SDHC memory card slot Initial set button REC button (Recording start button) About the initial set button After turning off the power of the camera, while recharging the battery, turn on the power of the camera while holding down this button, and wait for about 5 seconds or more without releasing this button. Wait about 3 minutes after releasing the button. The camera will start up and the settings including the network settings will be initialized. Before initializing the settings, it is recommended to... -
Page 14: Rear View
<Battery container (Optional)> WV-TB311 (Optional) Indicator lamps <Rear view> Clip Connector Power button The connector cover of the battery container (optional) can be opened in the following way and fixed to the side of the battery container (optional). When storing the battery container (optional) in the stand, open the connector cover and fix it to the side of the battery container (optional). Connector cover Connector cover Network/charge connector About the battery container's indicators The battery container's indicators light as follows according to the status of the camera. Understanding how and when the indicators light can help you troubleshoot problems with the camera. Indicator Slow blinking Fast blinking Light off... - Page 15 <Conversion box (Optional)> WV-TC312 (Optional) Conversion box (optional) Network/charge cable Power indicator Network connector Terminals of the 12 V DC IN connector (Pinout) Pin No. 1 2 3 4 12 V DC IN connector...
- Page 16 The battery container (optional) and the camera can be stored in the stand mounted to the conver- sion box (optional). With the battery container (optional) and the camera stored in the stand, the conversion box (optional) can be connected to 12 V DC or a PoE hub, making recharging the bat- tery container (optional) possible, a LAN cable can also be connected to the conversion box (optional), making it possible to view saved images on a computer monitor. When removing the stand from the conversion box (optional), lift up the stand while pressing the 4 tabs on the stand at the same time. Stand Conversion box (optional)
-
Page 17: Insert/Remove An Sdhc Memory Card
Insert/remove an SDHC memory card IMPORTANT: • Contact an authorized service center for information on replacing SDHC memory cards. • Before inserting an SDHC memory card, turn off the power of the camera first. • When inserting an SDHC memory card, make sure the direction. • When the SDHC memory card is inserted or removed with the power on, data in the SDHC memory card may be damaged. • Do not use other screws to tighten the cover. Recommended tightening torque T8: 0.2 N·m {0.14 lbf·ft} Remove the memory cover after removing the tamperproof screw of the cover on the WV-TW310, and insert the SDHC memory card into the SDHC memory card slot. -
Page 18: Installation
Installation Connecting the battery container (optional) to the camera Align the direction of the mark on the connector on the end of the connecting cable to the direction of the mark on the battery container (optional). Insert the connector of the connecting cable straight into the connector of the battery container (optional), and then lock it by rotating the outer ring of the connecting cable clockwise. Battery container (optional) Connector Rotate clockwise. Outer ring Removing the battery container (optional) from the camera To remove the camera from the battery container (optional), unlock the connector by rotating the outer ring counterclockwise, and then pull the connecting cable straight. - Page 19 Connecting the conversion box (optional) to the battery container (optional) Connect the power to the conversion box (optional). Connect 12 V DC or PoE hub for the power source. Connecting cable Stand Camera Conversion box Network connector (optional) LAN cable 12 V DC IN connector Connect the network/charge cable of the conversion box (optional) to the network/charge con- nector of the battery container (optional). Insert the cable into the connector until a click is heard. Ensure that they are connected in the correct direction. Battery container (optional) Network/charge connector Network/charge cable...
- Page 20 Connect the connecting cable of the camera to the connector of the battery container (optional). Then charging starts. Connecting cable Battery container (optional) Camera LAN cable IMPORTANT: • Recharging will not begin if the temperature of the internal battery pack is outside of the allow- able temperature range (0 °C to +50 °C {32 °F to 122 °F}). • Charging begins automatically when the temperature enters the allowable range. • Recharging will stop after 6 hours from when the connection was made. (Under normal conditions, recharging finishes within 3.5 hours.) • Exposing the battery to high temperatures may cause battery deterioration (reduced battery capacity and recharging cycle). Note: • When the camera is connected to a PoE hub without the battery container (optional) connected, the power indicator of the conversion box (optional) may blink. This is not a malfunction.
- Page 21 Wearing the camera Attach the battery container (optional) to the belt you are wearing. Belt Battery container (optional) The camera clip can be attached in 4 directions to the camera depending on where you want to fix the camera. The camera clip can be fixed to clothing (belts, pockets, etc.) from different directions (top, bottom, left, or right) by changing the direction it is attached to the camera. To change the direction of the camera clip, loosen the camera clip screws, rotate the clip to the desired direction, and then retighten the camera clip screws. Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}. Fixing screw for clip...
- Page 22 Fix the camera to your clothing. <WV-TW310L> <Front view> <Rear view> Connecting cable Camera Battery container (optional) <Lens angular field of view> <WV-TW310S> Camera 140° 180° IMPORTANT: • Attach the camera so that it is securely fixed. • Attaching the camera to loose clothing reduces the effectiveness of distortion correction.
-
Page 23: Connection
Connection Caution: • ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or LIMITED POWER SOURCE. Before starting the connection, turn off the power for this camera and the devices to be connected, and then prepare the required devices and cables. Connection example when connecting to a network using a PoE hub PoE Hub Charge 5 V DC Data Communication LAN cable (category 5 or better, straight, STP*) PC <Required cable> LAN cable (category 5 or better, straight, STP*) * E models only IMPORTANT: • Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX. • Power supply is required for each camera. When using a PoE device (hub), 12 V DC power supply is unnecessary. -
Page 24: Configure The Network Settings
CD-ROM. When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on the "Network" page of the setup menu. Refer to the Operating Instructions (included in the CD-ROM) for further information. - Page 25 • The Wearable Camera Agent Software and Panasonic IP setting software cannot be used on the same PC at the same time. To use the Panasonic IP setting software on a PC with Wearable Camera Agent Software installed: right click "My Computer" and select "Manage" to open the "Computer Management"...
- Page 26 Installation of Wearable Camera Agent Software Insert the provided CD-ROM into the CD-ROM drive of your PC. Double-click "Agent_setup.exe" in the "PC_software" folder. The installer for Wearable Camera Agent Software will start. Follow the on-screen instructions. If the installation is performed with the standard settings, a "C:\Panasonic\Wearable" folder is created and executable files and other files are installed. Configure the exceptional settings of Windows Firewall. Procedures for Windows XP q Click the "Security Center" on the "Control Panel", and click "Windows Firewall"- "Exceptions" tab. w Click the "Add Program..." button, and click the "Browse..." button. e S elect "CamManageService.exe" in the folder "C:\Panasonic\Wearable\Agent", and click the "Open" button. r Select "CamManageService.exe", and click the "OK" button. t Perform steps w to r in the same manner to add "AgentGui.exe". Procedures for Windows Vista q O pen the "Security" on the "Control Panel", and click the "Windows Firewall"- "Allow A Program Through Windows Firewall"-"Exceptions" tab. w Click the "Add Program..." button, and click the "Browse..." button. e S elect "CamManageService.exe" in the folder "C:\Panasonic\Wearable\Agent", and click the "Open" button.
- Page 27 How to operate the Wearable Camera Agent Software Refer to the WV-TW310-Agent_en.chm file for the details. Installation of Wearable Camera Viewer Software Insert the provided CD-ROM into the CD-ROM drive of your PC. Double-click "Viewer_setup.exe" in the "PC_software" folder. The installer for Wearable Camera Viewer Software will start. Follow the on-screen instructions. If the installation is performed with the standard settings, a "C:\Panasonic\Wearable" folder is created and executable files and other files are installed. Uninstallation of Wearable Camera Viewer Software Procedures for Windows XP q Select "Wearable Camera Viewer" from [Control Panel]-[Add or Remove Programs]. w Click [Delete]. The uninstall program starts. Follow the on-screen instructions to uninstall the program.
-
Page 28: Troubleshooting
When using a PoE device for power supply Power is not turned on. • Are the PoE device and the network connector on the rear of the camera connected using a LAN cable (4-pair)? → C heck whether the connection is appropriately established. • Depending on the PoE device, the power supply will stop when the demanded power exceeds its total power limit for all PoE ports. → R efer to the operating instructions of the PoE device in use. Camera search cannot Click "Services and Applications", select be performed with "Wearable Camera Agent" under Panasonic "IP Setting "Services", and then right click and select Software". "Stop". After using Panasonic "IP Setting Software", follow the above procedure to select "Wearable Camera Agent", and then right click and the select "Start". -
Page 29: Specifications
12 V DC*: 650 mA, PoE: 11 W (Class 0 device) * ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or LIMITED POWER SOURCE. Ambient operating –10 °C to +50 °C {14 °F to 122 °F} temperature: In wearing: -10 °C to +45 °C {14 °F to 113 °F} Ambient operating humidity: Less than 90 % (no condensation) Continuous operating time: Approx. 5 hours (at normal temperature, at the time of purchase when charged fully) Battery: WV-TB311 (Lithium-ion battery) only Dimensions: 45 mm (W) x 75 mm (H) x 41 mm (D) {1-25/32 inches (W) x 2-15/16 inches (H) x 1-5/8 inches (D)} (Excluding the cable and projection.) Mass: WV-TW310L: Approx. 210 g {0.46 lbs.} WV-TW310S: Approx. 160 g {0.35 lbs.} WV-TW310L: 950 mm {37-3/8 inches} Cable Length: WV-TW310S: 600 mm {23-5/8 inches} Finish: Black Camera ● Image sensor: 1/4 type MOS image sensor Effective pixels: Approx. 1.3 megapixels Scanning area: 3.60 mm (H) x 2.70 mm (V) {5/32 inches (H) x 11/100 inches (V)} Scanning system: Progressive Minimum illumination: Color: 1.5 lx {1.5 footcandle} BW: 1.0 lx {1.0 footcandle}... - Page 30 IPv6: HTTP, FTP IPv4: HTTP, FTP, DHCP OS * Microsoft Windows 7 Microsoft Windows Vista Microsoft Windows XP SP3 Browser: Windows Internet Explorer 9.0 (32-bit) Windows Internet Explorer 8.0 (32-bit) Windows Internet Explorer 7.0 (32-bit) Microsoft Internet Explorer 6.0 SP3 Maximum concurrent access number: 10 at JPEG, 4 at H.264 Compatible SDHC memory Manufactured by Panasonic card (option): SDHC memory card: 32 GB, Class 10 ® ® *1 Refer to "Notes on Windows / Internet Explorer versions" (included in the CD-ROM) for fur- ther information about system requirements for a PC and precautions when using Microsoft Windows 7, Microsoft Windows Vista or Internet Explorer. *2 When using IPv6 for communication, use Microsoft Windows 7 or Microsoft Windows Vista.
-
Page 31: Standard Accessories
Standard accessories Installation Guide (this document) .................. 1 pc. Warranty card* ......................1 pc. CD-ROM* ........................1 pc. *1 P models only *2 T he CD-ROM contains the operating instructions and the software. Optional accessories Battery Container (Li-ion 3.7 V DC, 2450 mAh, 9.1 Wh) ..WV-TB311 Conversion Box ............... WV-TC312 User License Accessory (For H.264) ........BB-HCA8A (P model) BB-HCA8CE (E model, Korea) ... - Page 32 For U.S. and Canada: For Europe and other countries: Panasonic Corporation Panasonic System Communications Company of North America, http://panasonic.net Unit of Panasonic Corporation Importer's name and address to follow EU rules: of North America www.panasonic.com/business/ Panasonic Testing Centre For customer support, call 1.800.528.6747...