Makita SA7000 Instruction Manual
Angle sander
Hide thumbs
Also See for SA7000:
- Instruction manual (45 pages) ,
- Instruction manual (49 pages) ,
- Technical information (6 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita SA7000
Summary of Contents for Makita SA7000
- Page 1 INSTRUCTION MANUAL Angle Sander SA7000 008323 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model SA7000 Disc diameter 180 mm (7") Spindle thread 15.87mm (5/8") No load speed (RPM) 5500/min Overall length 453 mm (17-27/32") Net weight 3.5 kg (7.7 lbs) Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. - Page 3 Do not expose power tools to rain or wet Power tool use and care conditions. Water entering a power tool will 18. Do not force the power tool. Use the correct increase the risk of electric shock. power tool for your application. The correct Do not abuse the cord.
- Page 4 Operations such as grinding, wire brushing, 10. Hold power tool insulated gripping polishing or cutting-off are not recommended surfaces only, when performing an operation to be performed with this power tool. where the cutting accessory may contact Operations for which the power tool was not hidden wiring or its own cord.
- Page 5 the accessory. Corners, sharp edges or bouncing 34. Do not use the tool on any materials have a tendency to snag the rotating accessory and containing asbestos. cause loss of control or kickback. 35. Some material contains chemicals which may e) Do not attach a saw chain woodcarving blade be toxic.
-
Page 6: Functional Description
To start the tool, push in the lock lever and then pull the FUNCTIONAL DESCRIPTION switch trigger. Release the switch trigger to stop. For continuous operation, push in the lock lever, pull the switch trigger and then push the lock lever further in. CAUTION: To stop the tool from the locked position, pull the switch Always be sure that the tool is switched off and... -
Page 7: Operation
Mount the rubber pad onto the spindle. Fit the disc on the MAINTENANCE rubber pad and screw the lock nut onto the spindle. To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and CAUTION: securely tighten clockwise. -
Page 8: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Rubber pad • Abrasive discs • Lock nut •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884740-931...