Replacing The System Board Assembly - Dell Vostro 1710 Service Manual
Hide thumbs
Also See for Vostro 1710:
- User manual (117 pages) ,
- Owner's manual (108 pages) ,
- Service manual (59 pages)
Table of Contents
Advertisement
1 system board
3 DC-in cable
5 Optical drive cable
7 speaker cable connector
Replacing the System Board Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
NOTICE:
Ensure that any loose cables do not get caught beneath the system board.
This procedure assumes that you have completed the removal procedure
1. Insert the left side of the system board into the base of the computer at an angle until the connectors on the system
board are aligned with the holes on the base of the computer, then carefully lower the system board into place.
2. Replace the three M2.5 x 5-mm screws on the system board.
3. Connect the 1394/USB daughter-card cable to the connector on the system board.
4. Disconnect the DC-in cable and speaker cable from the system board.
5. Replace the optical drive (see
6. Replace the palm rest (see
7. Replace the display assembly (see
8. Replace the keyboard (see
9. Replace the hinge cover (see
10. Replace the fan (see
11. Replace the WLAN card (see
12. Replace the hard drive (see
2 M2.5 x 5-mm system board screws (2)
4 card with Bluetooth technology cable connector
6 1394/USB daughter-card cable connector
Replacing the Optical
Replacing the Palm
Replacing the Display
Replacing the
Keyboard).
Replacing the Hinge
Replacing the
Fan).
Replacing a WLAN
Replacing the Hard
Removing the System Board
Drive).
Rest).
Assembly).
Cover).
Card).
Drive).
Assembly.
Advertisement
Table of Contents
